[Elecraft] How to set up SSB

[Dan Barker]

Well, you made me think, but it turns out, you are right. The CAL FIL
display says "t" for the 2.20 setting, but it's really using OP1. However,
with the alignment done on 2.20 and transmit done on OP1, the filter will be
very off, and the ripple is extreme.

My 2 year old KSB2 seems OK in the flatness department.

Dan / WG4S / K2 #2456

Bob (G3VVT) sez:

The option of OP1 or 2.2, etc in the filter selection is for receive only.
<snip>