[Elecraft] ATU P6/J7 alignment

[Mike S]

At 09:05 PM 11/24/2004, K4IA at aol.com wrote...
>closest to the edge of the radio.  But, it looks like the ground  side is the 
>one closest to the center of the radio not the edge.  In other  words, either 
>the drawing on page 10 is backwards or the locking tab has to be  to the back 
>of the radio or

? Page 10 shows ground on the left of J7 when viewing it from the "non-locking tab" side. If P6 is installed with the tab toward the front of the K2, the ground will end up on the right, toward the edge.