[Elecraft] MD2 resistor mod - a different approach?

[W3FPR - Don Wilhelm]

Walt and all,

Thanks for that info - I should have checked the schematic before I opened 
my mouth (well fingers anyway).

The jumper must be removed from the mic header.  Even though FUNC is not 
used in the K2, the front panel is wired so that it COULD be used (for some 
future something).

This also means that my statement about your mic being able to be used on 
another K2 is also incorrect.  -- but everything does work FB if you remove 
the configuration jumper.

73,
Don W3FPR

----- Original Message ----- 
>
> Thanks for sharing this simple, ingenious approach.  I did it this 
> morning.
> The only thing I forgot to do the first time was to remove the jumper I 
> had
> across FUNC/5, which kept the FUNC circuit tied to Pin 5.  It was obvious
> something was wrong, and I quickly realized I needed to remove that 
> jumper.
> Works great now.
>