[Elecraft] OK, I broke it!

[Tom Arntzen]

I would take out the 60m option and try again!
Just to rule out that card.
OR??? Is secondary menu for d19 set?
Orientation for d19?

Tom LA1PHA

----- Original Message ----- 
From: "Ian J Maude" <ian at gb7mbc.net>
To: "Elecraft" <Elecraft at mailman.qth.net>
Sent: Wednesday, November 10, 2004 10:06 PM
Subject: [Elecraft] OK, I broke it!


> Hi all,
> I fitted the 160m and 60m boards today in my K2 #4044.  I decided
> (famous last words) that I should only take the heatsink off once so I
> did both mods together.
> Anyhow, the bands exist and no smoke was let out.  However, I set the K2
> to 2 watts, put it into tune and zip.  Nothing out.  I checked and lo
> and behold, 8v on R31.  I cannot alter the VCO voltage.  Have I fried
> something or any hints on where to look please.
>
> Cheers
>
> Ian
> -- 
> Ian Maude G0VGS Morecambe Lancs UK | ian at gb7mbc.net
> Sysop of GB7MBC, the Morecambe Bay Cluster
> Running Linux and DXSpider | K2 #4044
>
> Find out about Summits on the Air!
> Visit the SOTA web site at http://www.sota.org.uk
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.): 
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>