[Elecraft] New Tech Notes Article - SP2 Speaker for the K2

[Bill NY9H]

i put two small elliptical speakers above the tuner, in front of the amp in 
my  KA100/ KT100 EC2.....  i'll try to take a pix and post somewhere.,,,
i am using an amp section ( dual 6w  btl ) from a small motorola handsfree 
speaker,,,
from which the speaker was also too big to use....and the ellip speakers 
required amp-ping since they are nowhere as "sensitive" as the original 
jameco speaker,

bill


At 06:19 PM 11/23/2004, Vic Rosenthal wrote:

>Eric Swartz - WA6HHQ, Elecraft wrote:
>
>>We have just uploaded a new Tech Notes article to the Elecraft web site 
>>titled:
>>The SP2 External Speaker Project for your K2, By Dave White, VE6DRW
>
>Very interesting and nice job, Dave.  My guess is that the cost of 
>fabricating the baffle, etc. made it too expensive?  I have thought about 
>an EC2-cased speaker that would have a top-firing 4" speaker and a 
>front-firing 2" speaker with a crossover network.  Since the high 
>frequencies are much more directional, this would avoid the need to have a 
>baffle (although the speaker would have to have clearance on top).
>
>--
>73,
>Vic, K2VCO
>Fresno CA
>http://www.qsl.net/k2vco
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.): 
>http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com