[Elecraft] KDSP2's Primary Menu - K2 s/n 549

[Bob Nielsen]

On Wed, Nov 17, 2004 at 09:47:01PM -0600, Bill Scurlock wrote:
> When I tap the DISPLAY button on my K2 to access the KDSP2's primary menu I
> get an error message:  E13.1 0.40.  The last time I used the KDSP2, about a
> month ago, this menu access worked correctly.  The only thing different
> since then is that I removed the K2/100 top unit, and reinstalled the
> original top unit with the antenna tuner.  Also, I installed the new 2.04 K2
> firmware and the 1.09 I/O controller firmware.
> 
> What does E13.1 mean?  Where can I get a listing of the error codes?
> 
> The AFIL seems to work fine.  Help.
> 

Not an error code.  13.1 is the supply voltage and 0.40 is the current.

However, you should get that on the second tap and the DSP information
on the first tap.  A third tap should return you to the frequency 
display.

Bob, N7XY