May 2018 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue May 1 01:54:07 EDT 2018
Ending: Thu May 31 23:46:34 EDT 2018
Messages: 870

• [Elecraft] KPA500/K3 AUX bus specification   Bob Wilson, N6TV
• [Elecraft] CW AGC settings   Ian White
• [Elecraft] [OT] KX2 on SOTA Activation in TF - TF/SV-041   Yngvi (TF3Y)
• [Elecraft] [OT] KX2 on SOTA Activation in TF - TF/SV-041   Michael Poteet
• [Elecraft] CW AGC settings   Bob Wilson, N6TV
• [Elecraft] FOR SALE: K3 weighted tuning knobs   Jamie WW3S
• [Elecraft] K2 RF Board P5 speaker connector orientation   Mark Petrovic
• [Elecraft] OT: Protecting Toroidal Cores   marvwheeler at nwlink.com
• [Elecraft] OT: Protecting Toroidal Cores   donovanf at starpower.net
• [Elecraft] OT: Protecting Toroidal Cores   Don Wilhelm
• [Elecraft] K2 RF Board P5 speaker connector orientation   Don Wilhelm
• [Elecraft] OT: Protecting Toroidal Cores   Jim Brown
• [Elecraft] OT: Protecting Toroidal Cores   donovanf at starpower.net
• [Elecraft] [OT] KX2 on SOTA Activation in TF - TF/SV-041   Erlend Grimseid
• [Elecraft] OT: Protecting Toroidal Cores   Charlie T
• [Elecraft] OT: Protecting Toroidal Cores   CUTTER DAVID
• [Elecraft] CW AGC settings   Bill
• [Elecraft] CW AGC settings   Don Wilhelm
• [Elecraft] FS: XV144 and XV432 transverters.   Jim Rogers
• [Elecraft] OT: Protecting Toroidal Cores   N2TK, Tony
• [Elecraft] OT: Protecting Toroidal Cores   Dave Cole (NK7Z)
• [Elecraft] FS: XV144 and XV432 transverters.   Kevin der Kinderen
• [Elecraft] FS: XV144 and XV432 transverters.   Kevin der Kinderen
• [Elecraft] CW AGC settings   Ted Bryant
• [Elecraft] FS: XV144 and XV432 transverters.   Jim Rogers
• [Elecraft] FS: XV144 and XV432 transverters.   Don Wilhelm
• [Elecraft] F.S. SignaLink USB for KX3/KX2   Joseph Trombino, Jr
• [Elecraft] For Sale: Receive PreAmp   Elliott Lawrence
• [Elecraft] FS XV144 and XV432 transverters - two for one   Jim Rogers
• [Elecraft] new K3S display issue   Christopher Hoover
• [Elecraft] For Sale: Receive PreAmp Sold Pending receipt of funds.   Elliott Lawrence
• [Elecraft] SignaLink USB   Joseph Trombino, Jr
• [Elecraft] K1 PORTABLE OPS STATION   ardujenski at aol.com
• [Elecraft] K1 PORTABLE OPS STATION   David Gilbert
• [Elecraft] K1 PORTABLE OPS STATION   Neil Gallensky
• [Elecraft] PR6 Preamp for Sale   Richard Lawn
• [Elecraft] Operating Digital Modes via RemoteRig with K3 and local PC   K7MDL
• [Elecraft] K2 for sale   Andy Yates
• [Elecraft] FS: Elecraft Station   Rob Monsipapa
• [Elecraft] [K2] auto tuner capabilities   Robert G Strickland
• [Elecraft] K2 Sold   Andy Yates
• [Elecraft] [K2] auto tuner capabilities   Wayne Burdick
• [Elecraft] [K2] auto tuner capabilities   Vic Rosenthal
• [Elecraft] OT: W0EB's Dot Stabilizer Info   Jim Sheldon
• [Elecraft] OT: For Sale - NOS 36A (30A Cont) Switching Power Supply   Doug Hensley
• [Elecraft] 6 meter openings and how to catch them   Wayne Burdick
• [Elecraft] 6 meter openings and how to catch them   Dave Cole (NK7Z)
• [Elecraft] KPA 1500 arrived   Dan
• [Elecraft] 6 meter openings and how to catch them   Robert Felmey
• [Elecraft] 6 meter openings and how to catch them   Paul Van Dyke
• [Elecraft] OT: W0EB's Dot Stabilizer Info   Troy, W6HV
• [Elecraft] 6 meter openings and how to catch them   Dave Cole (NK7Z)
• [Elecraft] 6 meter openings and how to catch them   K7MDL
• [Elecraft] Stuck KX3 LED segment   kw9e
• [Elecraft] 6 meter openings and how to catch them   Dave Cole (NK7Z)
• [Elecraft] Stuck KX3 LED segment   Michael Blake
• [Elecraft] Stuck KX3 LED segment   Peter LaBissoniere
• [Elecraft] Stuck KX3 LED segment   Chris
• [Elecraft] Stuck KX3 LED segment   Peter LaBissoniere
• [Elecraft] [K2] auto tuner capabilities   Chip Stratton
• [Elecraft] Question on KX3 transmit errors   James Cizek
• [Elecraft] Question on KX3 transmit errors   Don Wilhelm
• [Elecraft] FS: Pigknob for K3   Bill
• [Elecraft] KXAT2 problem   VE2PID
• [Elecraft] KXAT2 problem   Lyle Johnson
• [Elecraft] KXAT2 problem   Chris
• [Elecraft] KXAT2   VE2PID
• [Elecraft] KXAT2 problem   rich hurd WC3T
• [Elecraft] K2 VFO encoder / control board close fit   Mark Petrovic
• [Elecraft] K2 VFO encoder / control board close fit   Robert G Strickland
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] Factory Power Calibration of the KPA-1500 - question   James F. Boehner MD
• [Elecraft] K2 VFO encoder / control board close fit   Don Wilhelm
• [Elecraft] K3 - PA- Temp   Ken Roberson
• [Elecraft] K3 - PA- Temp   Roy Koeppe
• [Elecraft] Stuck KX3 LED segment   Nr4c
• [Elecraft] AUX contacts on KX2 - anyone using them?   John Harper
• [Elecraft] K3 Serial Comms with Apple Mac ?   Phil Hystad
• [Elecraft] K3 Serial Comms with Apple Mac ?   Bayard Coolidge, N1HO
• [Elecraft] K3 EQ settings?   Mike Markowski
• [Elecraft] FS: K3, P3, KAT500, KPA500   Rob Monsipapa
• [Elecraft] K3 Serial Comms with Apple Mac ?   Phil Hystad
• [Elecraft] For Sale - NOS 36A (30A Cont) Switching Power Supply   Doug Hensley
• [Elecraft] K3 Serial Comms with Apple Mac ?   Keith Onishi
• [Elecraft] K3 EQ settings?   Walter Underwood
• [Elecraft] K3 EQ settings?   Fred Jensen
• [Elecraft] KPA1500 SWR meter   Don Butler
• [Elecraft] Elecraft CW Net Report   kevinr
• [Elecraft] [KAT500] Remembered Antennas   MaverickNH
• [Elecraft] K3 EQ settings?   Mike Markowski
• [Elecraft] [KAT500] Remembered Antennas   Dave Cole (NK7Z)
• [Elecraft] Elecraft CW Net Report   Dave Scarfe
• [Elecraft] KPA1500 SWR meter   Bud Semon
• [Elecraft] [KAT500] Remembered Antennas   MaverickNH
• [Elecraft] KPA1500 SWR meter   john at kk9a.com
• [Elecraft] [KAT500] Remembered Antennas   john at kk9a.com
• [Elecraft] [KAT500] Remembered Antennas   Dave Cole (NK7Z)
• [Elecraft] Samuel Morse's birthday (Friday, April 27th); good excuse to break out your old hand keys   Wes Stewart
• [Elecraft] KPA1500 SWR meter   Don Butler
• [Elecraft] KPA1500 SWR meter   Michael Walker
• [Elecraft] K3 EQ settings?   Jim Brown
• [Elecraft] Paddle mounts for KX1 and KX2/3 for sale   Robert S. McCuskey
• [Elecraft] KPA1500 SWR meter   Jim Brown
• [Elecraft] K3S/K3/KX3 EQ settings ... three (3) different recommended settings??   John Altman
• [Elecraft] K3S/K3/KX3 EQ settings   john at kk9a.com
• [Elecraft] K3S/K3/KX3 EQ settings ... three (3) different recommended settings??   Fred Jensen
• [Elecraft] Paddle mounts for KX1 and KX2/3 for sale   Robert S. McCuskey
• [Elecraft] WTB K3100   Arthur Lewis
• [Elecraft] Looking for RFI snapshots...   Dave Cole (NK7Z)
• [Elecraft] K3 EQ settings?   Clay Autery
• [Elecraft] K3 - FT8   N2TK, Tony
• [Elecraft] K3 - FT8   Cady, Fred
• [Elecraft] K3 - FT8   Josh Fiden
• [Elecraft] K3 - FT8   N2TK, Tony
• [Elecraft] W6SFM Bug Roundup Event is coming Next Weekend!   W6SFM
• [Elecraft] K3 - PA- Temp   ANDY DURBIN
• [Elecraft] K3 - PA- Temp   Roy Koeppe
• [Elecraft] Dayton 2018 Volunteers   Madelyn Gomez
• [Elecraft] K3 EQ settings?   Jim Brown
• [Elecraft] CW Splatter?   Roger Meadows
• [Elecraft] [KX3] CW Splatter?   Don Wilhelm
• [Elecraft] [KX3] CW Splatter?   Roger Meadows
• [Elecraft] [KX3] CW Splatter?   Don Wilhelm
• [Elecraft] [KX3] CW Splatter?   Rick WA6NHC
• [Elecraft] PX3 Opposite Sideband Nulling Why?   Mal Speer
• [Elecraft] K3 - FT8   Nr4c
• [Elecraft] K2 VFO encoder / control board close fit   Mark Petrovic
• [Elecraft] K3 - FT8   Don Wilhelm
• [Elecraft] K2 VFO encoder / control board close fit   Don Wilhelm
• [Elecraft] KXAT2 ATU MD Menu   VE2PID
• [Elecraft] KX3 Internal Batteries   Jeff Davis
• [Elecraft] KX3 Internal Batteries   Grant Youngman
• [Elecraft] KX3 Internal Batteries   rich hurd WC3T
• [Elecraft] KX3 Internal Batteries   Walter Underwood
• [Elecraft] KX3 Internal Batteries   Sean Donovan
• [Elecraft] K3 eq software available   Mike Markowski
• [Elecraft] KX3 Internal Batteries   Walter Underwood
• [Elecraft] KX3 Internal Batteries   Jeff Davis
• [Elecraft] K3 eq software available   Dave Cole (NK7Z)
• [Elecraft] KX3 Internal Batteries   Walter Underwood
• [Elecraft] KX3 Internal Batteries   Lynn W. Taylor, WB6UUT
• [Elecraft] KX3 Internal Batteries   Raymond Sills
• [Elecraft] KXAT2 ATU MD Menu   Wayne Burdick
• [Elecraft] More KPA 1500's out there...   rboates at incentre.net
• [Elecraft] KX3 Internal Batteries   k2ud at roadrunner.com
• [Elecraft] No Luck with CW Messages.   Bob DeHaney
• [Elecraft] No Luck with CW Messages.   Fred Jensen
• [Elecraft] K3 eq software available   Fred Jensen
• [Elecraft] CW Splatter?   Fred Jensen
• [Elecraft] K3 eq software available   Mike Markowski
• [Elecraft] KPA500 installtion with ICOM 7300   Brian Phelan
• [Elecraft] KPA500 installtion with ICOM 7300   Joe Subich, W4TV
• [Elecraft] K3 eq software available   Fred Jensen
• [Elecraft] KPA500 installtion with ICOM 7300   john at kk9a.com
• [Elecraft] KX3 Internal Batteries   Chip Stratton
• [Elecraft] KPA500 installtion with ICOM 7300   Cady, Fred
• [Elecraft] KPA500 installtion with ICOM 7300   Jim Brown
• [Elecraft] KPA500 installtion with ICOM 7300   Joe Subich, W4TV
• [Elecraft] For Sale: KX3 and K2/100   Dean L
• [Elecraft] LIN IN level varies   Alan Ibbetson
• [Elecraft] K3 - No Tx Power, No demod   Stewart Bryant
• [Elecraft] AX1   MaverickNH
• [Elecraft] KPA500 installtion with ICOM 7300   john at kk9a.com
• [Elecraft] KPA500 installtion with ICOM 7300   Don Wilhelm
• [Elecraft] LIN IN level varies   Bill Frantz
• [Elecraft] LIN IN level varies   Alan Ibbetson
• [Elecraft] LIN IN level varies   Don Wilhelm
• [Elecraft] KPA500 installtion with ICOM 7300   Jack Brindle
• [Elecraft] LIN IN level varies   Alan Ibbetson
• [Elecraft] More KPA 1500's out there...   Ron Broersma
• [Elecraft] KPA500 installtion with ICOM 7300   ANDY DURBIN
• [Elecraft] KPA500 installtion with ICOM 7300   Don Wilhelm
• [Elecraft] OT: For sale HFS-1.5 HF Sampler/Coupler -30dB   ab2tc
• [Elecraft] First impressions of KPA1500 #113   Les Peters
• [Elecraft] AX1   Dave AD6A
• [Elecraft] First impressions of KPA1500 #113   Larry (K8UT)
• [Elecraft] First impressions of KPA1500 #113   Roy Koeppe
• [Elecraft] First impressions of KPA1500 #113   Buck
• [Elecraft] First impressions of KPA1500 #113   Wayne Burdick
• [Elecraft] No Luck with CW Messages.   Paul Kirley
• [Elecraft] Pro Audio Engineering Kx33 output   hhoyt
• [Elecraft] KXPA100 Amplifier   Mark Gebhardt
• [Elecraft] New release of Win4K3Suite is available   Tom
• [Elecraft] First impressions of KPA1500 #113   Clay Autery
• [Elecraft] KXPA100 Amplifier   Don Wilhelm
• [Elecraft] OT: For sale HFS-1.5 HF Sampler/Coupler -30dB   ab2tc
• [Elecraft] For sale- K2/10- Avail at dayton   Dean L
• [Elecraft] For sale :HW-8 w/PS   Dean L
• [Elecraft] For sale :HW-8 w/PS   Dean L
• [Elecraft] K3S - Help me decide on which options to purchase   Michael Gillen
• [Elecraft] P3 to video   Dennis L. Haarsager
• [Elecraft] P3 to video   Michael Blake
• [Elecraft] P3 to video   Rob Neal
• [Elecraft] P3 to video   Jim Brown
• [Elecraft] K3S - Help me decide on which options to purchase   Don Wilhelm
• [Elecraft] First impressions of KPA1500 #113   Les Peters
• [Elecraft] KX3 and Timewave Navigator   Joseph Trombino, Jr
• [Elecraft] P3 to video   Michael Blake
• [Elecraft] P3 to video   Clay Autery
• [Elecraft] Want KAT-500   Michael K Bottles
• [Elecraft] LIN IN level varies   Alan Ibbetson
• [Elecraft] K-Pod questions   Fred Jensen
• [Elecraft] K3S - Help me decide on which options to purchase   Wes Stewart
• [Elecraft] K3S - Help me decide on which options to purchase   George Thornton
• [Elecraft] KPA-1500 Order   Ed Gray W0SD
• [Elecraft] K3S - To Tune or Not to Tune - That is the question   Jim - N4ST
• [Elecraft] KPA-1500 question   Ronnie Hull
• [Elecraft] P3 to video   Richard Schmiedt
• [Elecraft] K-Pod questions   Rick Tavan
• [Elecraft] P3 to video   Jim Brown
• [Elecraft] K3S   Frederick Dwight
• [Elecraft] K3S - To Tune or Not to Tune - That is the question   kstover at ac0h.net
• [Elecraft] K3S - Help me decide on which options to purchase   Don Sayler
• [Elecraft] KPA-1500 question   James Wilson
• [Elecraft] K-Pod questions   Dennis Moore
• [Elecraft] Looking to help a friend with remote set up   Jim Blanca
• [Elecraft] KX3 - Duty Cycle of 2M Transverter?   Jeff Hughes
• [Elecraft] KPA-1500 question   Nr4c
• [Elecraft] KX2   n4mjg
• [Elecraft] KX2   Mike Morrow
• [Elecraft] KPA-1500 question   James F. Boehner MD
• [Elecraft] K3S - Help me decide on which options to purchase   Michael Gillen
• [Elecraft] Wow, that was fast   Michael K Bottles
• [Elecraft] K-Pod questions   Bill Frantz
• [Elecraft] WTB Wanted K3S   Michael Gillen
• [Elecraft] WTB Wanted K3S   Don Wilhelm
• [Elecraft] KXPA100   Charles Carlon
• [Elecraft] KXPA100   Grant Youngman
• [Elecraft] KXPA100   Rick WA6NHC
• [Elecraft] K3 Strange Power Output Problem   Ed G
• [Elecraft] Tilt Stand for KPA1500?   Dauer, Edward
• [Elecraft] KXPA100   Charles Carlon
• [Elecraft] K3 Strange Power Output Problem   Mark E. Musick
• [Elecraft] Tilt Stand for KPA1500?   Jim N7US
• [Elecraft] KXPA100   John_N1JM
• [Elecraft] K3 Strange Power Output Problem   Ed G
• [Elecraft] Tilt Stand for KPA1500?   Mark E. Musick
• [Elecraft] [OT] Arlan Lightweight Travel Headsets   Grant Youngman
• [Elecraft] K3 Strange Power Output Problem   Brian Hunt
• [Elecraft] P3 display versus FlexRadio   Jim N7US
• [Elecraft] Remote Tuning for Loop?   Phil Kane
• [Elecraft] P3 display versus FlexRadio   Wayne Burdick
• [Elecraft] Remote Tuning for Loop?   Grant Youngman
• [Elecraft] Remote Tuning for Loop?   Dave Cole (NK7Z)
• [Elecraft] P3 display versus FlexRadio   Martin Sole
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] P3 display versus FlexRadio   Jim Brown
• [Elecraft] K3 Strange Power Output Problem   donovanf at starpower.net
• [Elecraft] FS: K3, KPA500, P3, pair of SP3's   Rob Monsipapa
• [Elecraft] K3 Strange Power Output Problem   Wes Stewart
• [Elecraft] Remote antenna tuning   Gary Baker
• [Elecraft] K3 Strange Power Output Problem   Wayne Burdick
• [Elecraft] KXPA100   mongoose1951 at googlemail.com
• [Elecraft] KPA1500 arriving, 2KFA for sale   John Perlick
• [Elecraft] Strange power problem with KPA1500   Carl Yaffey
• [Elecraft] K3 Strange Power Output Problem   Bob Wilson, N6TV
• [Elecraft] K3 - FT8   G3XAQ
• [Elecraft] Strange power problem with KPA1500   Michael Blake
• [Elecraft] Strange power problem with KPA1500   Carl Yaffey
• [Elecraft] Strange power problem with KPA1500   Bob Wilson, N6TV
• [Elecraft] Strange power problem with KPA1500   Michael Blake
• [Elecraft] K3 - FT8   ANDY DURBIN
• [Elecraft] K3 - FT8   Don Wilhelm
• [Elecraft] K3 - FT8   ANDY DURBIN
• [Elecraft] K3 Strange Power Output Problem   donovanf at starpower.net
• [Elecraft] K3 Strange Power Output Problem   Don Wilhelm
• [Elecraft] K3 Strange Power Output Problem   donovanf at starpower.net
• [Elecraft] K3 Strange Power Output Problem   Bob Wilson, N6TV
• [Elecraft] OT: Does anyone speak Korean ?   Doug Hensley
• [Elecraft] Elecraft CW Net Report   kevinr
• [Elecraft] For Elecraft Outdoors Folks! Buddipole for Sale.   Edward McCann
• [Elecraft] P3 display versus FlexRadio   Vic Rosenthal
• [Elecraft] K3 Strange Power Output Problem   DaleJ
• [Elecraft] KX3 APF   Petr, OK1RP/M0SIS
• [Elecraft] K3 Strange Power Output Problem   donovanf at starpower.net
• [Elecraft] K3 - FT8   Alan Ibbetson
• [Elecraft] K3 - FT8   Don Wilhelm
• [Elecraft] K3 - FT8   Gordon LaPoint
• [Elecraft] K3 - FT8   Gordon LaPoint
• [Elecraft] K3 - FT8   Alan Ibbetson
• [Elecraft] Strange issue K3S   Jerry
• [Elecraft] K3 - FT8   Tony Estep
• [Elecraft] KPA status info   Bill Stravinsky
• [Elecraft] KPA1500 status info   Bill Stravinsky
• [Elecraft] QRPworks at Hamvention   Shel KF0UR
• [Elecraft] KPA1500 status info   RIchard Williams
• [Elecraft] Sold: KX3-   Dean L
• [Elecraft] Strange issue K3S   Jerry
• [Elecraft] Strange issue K3S   Wes Stewart
• [Elecraft] K3s SSB generation ?   Michael Blake
• [Elecraft] K3s SSB generation ?   Lyle Johnson
• [Elecraft] K3s SSB generation ?   Michael Blake
• [Elecraft] KX3BNCMDKT - BNC upgrade   Petr, OK1RP/M0SIS
• [Elecraft] KX3BNCMDKT - BNC upgrade   Don Wilhelm
• [Elecraft] KX3BNCMDKT - BNC upgrade   rich hurd WC3T
• [Elecraft] Pro Audio Engineering Hamvention Special   Howard Hoyt
• [Elecraft] K3 spurs   Roger D Johnson
• [Elecraft] will RTTY and CW skimmer programs   Robert 'RC' Conley
• [Elecraft] will RTTY and CW skimmer programs   Grant Youngman
• [Elecraft] K3 spurs   Clay Autery
• [Elecraft] K3 spurs   K9MA
• [Elecraft] KPA1500 S/N 160 delivered today   Roy Koeppe
• [Elecraft] KX3BNCMDKT - BNC upgrade   Petr, OK1RP/M0SIS
• [Elecraft] For sale: PR6-10   Jim Leder
• [Elecraft] K3-0-mini / K3 dilemma   John P. Cummins, Sr.
• [Elecraft] K3-0-mini / K3 dilemma   rich hurd WC3T
• [Elecraft] K3-0-mini / K3 dilemma   Michael Gillen
• [Elecraft] FS - Elecraft KPA500 and KAT500   Larry (K8UT)
• [Elecraft] K3-0-mini / K3 dilemma   Mark Goldberg
• [Elecraft] KX3BNCMDKT - BNC upgrade   Walter Underwood
• [Elecraft] KPA1500 status info   Bill Stravinsky
• [Elecraft] KPA1500   Roger D Johnson
• [Elecraft] FS - Elecraft KPA500 and KAT500 SOLD   Larry (K8UT)
• [Elecraft] Product Announcements?   Richard Thorne
• [Elecraft] KPA1500 arrival   Chris Codella, W2PA
• [Elecraft] KPA-1500 #171 delivered   Ed Gray W0SD
• [Elecraft] KPA1500   Rick Tavan
• [Elecraft] PR6-10 SOLD   Jim Leder
• [Elecraft] WTB: HP/Agilent/Symmetricom 58517A Distribution Amplifier   Clay Autery
• [Elecraft] KPA500 WS power resolution   ANDY DURBIN
• [Elecraft] KPA500 WS power resolution   ANDY DURBIN
• [Elecraft] K3 spurs   Bill Stravinsky
• [Elecraft] K4   mark roz
• [Elecraft] KPA1500 S/N 160 delivered today   Bill Stravinsky
• [Elecraft] Factory Power Calibration of the KPA-1500 - question   Bill Stravinsky
• [Elecraft] K4   Peter Pauly
• [Elecraft] K4   Jim Brown
• [Elecraft] K4   Walter Underwood
• [Elecraft] K4   Michael Gillen
• [Elecraft] KPA-1500   Richard Zalewski
• [Elecraft] K4   Dave Cole (NK7Z)
• [Elecraft] KPA1500 S/N 160 delivered today   Roy Koeppe
• [Elecraft] KPA1500 S/N 160 delivered today   Larry (K8UT)
• [Elecraft] K4   k2ud at roadrunner.com
• [Elecraft] K4   Richard Lamont
• [Elecraft] K4   N2TK, Tony
• [Elecraft] KPA-1500   Richard Zalewski
• [Elecraft] KPA500 WS power resolution   ANDY DURBIN
• [Elecraft] K4   Mike Markowski
• [Elecraft] KPA1500 Delivery Time   Dauer, Edward
• [Elecraft] K4   Jim Brown
• [Elecraft] K4   Dan Baker
• [Elecraft] K4   Jim Brown
• [Elecraft] K3 to K3S Upgrade Opinions   Frank
• [Elecraft] K3 to K3S Upgrade Opinions   Bill Frantz
• [Elecraft] KPA1500 S/N 160 delivered today   Bill Stravinsky
• [Elecraft] K3 to K3S Upgrade Opinions   Stefan von Baltz, DL1IAO
• [Elecraft] K4   Stefan von Baltz, DL1IAO
• [Elecraft] K4   Joe Subich, W4TV
• [Elecraft] K4   Ed W0YK
• [Elecraft] Hamvention   Carl Yaffey
• [Elecraft] K4   Richard Lamont
• [Elecraft] KPA-1500   Rick Tavan
• [Elecraft] K4   Joe Subich, W4TV
• [Elecraft] To the Icom fans ...   Ken G Kopp
• [Elecraft] K4   Bob Gibson
• [Elecraft] To the Icom fans ...   Bill
• [Elecraft] KPA-1500   Richard Zalewski
• [Elecraft] KPA1500 fan speed interrogation   ANDY DURBIN
• [Elecraft] K4   Wes Stewart
• [Elecraft] K4   Wes Stewart
• [Elecraft] K3 to K3S Upgrade Opinions   Wes Stewart
• [Elecraft] To the Icom fans ...   Wes Stewart
• [Elecraft] K4   Martin Sole
• [Elecraft] K3 to K3S Upgrade Opinions   WILLIE BABER
• [Elecraft] K3 to K3S upgrade   Bill Shanney
• [Elecraft] RE; K3 to K3S Upgrade Opinions   Edward R Cole
• [Elecraft] [K2] Using the K2 above 29 MHz   Steve Kavanagh
• [Elecraft] K4   George Thornton
• [Elecraft] RE; K3 to K3S Upgrade Opinions   Nr4c
• [Elecraft] [K2] Using the K2 above 29 MHz   Dave Sublette
• [Elecraft] K4   wb4jfi at knology.net
• [Elecraft] To the Icom fans ...   Jim Brown
• [Elecraft] K3 to K3S Upgrade Opinions   Jim Brown
• [Elecraft] K4   Jim Brown
• [Elecraft] K4   Bill Frantz
• [Elecraft] [K2] Using the K2 above 29 MHz   Steve Kavanagh
• [Elecraft] To the Icom fans ...   Stefan von Baltz, DL1IAO
• [Elecraft] My First Report KPA 1500   Richard Zalewski
• [Elecraft] To the Icom fans ...   Bob McGraw K4TAX
• [Elecraft] My First Report KPA 1500   Joe Subich, W4TV
• [Elecraft] My First Report KPA 1500   Roy Koeppe
• [Elecraft] K4   Erik Basilier
• [Elecraft] [K2] Using the K2 above 29 MHz   Steve Kavanagh
• [Elecraft] K4?   Dauer, Edward
• [Elecraft] Subject: Re: K4   Jim Shepherd
• [Elecraft] K4?   Richard Thorne
• [Elecraft] K4?   Wes Stewart
• [Elecraft] K4?   Erik Basilier
• [Elecraft] [K2] Using the K2 above 29 MHz   Edward R Cole
• [Elecraft] Report on KPA-1500 #171 driving with a K3S   Ed Gray W0SD
• [Elecraft] K4?   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K4   Buddy Brannan
• [Elecraft] KPA1500 Delivery Time   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Report on KPA-1500 #171 driving with a K3S   K9MA
• [Elecraft] K4   Clay Autery
• [Elecraft] K4   Clay Autery
• [Elecraft] KPA1500 Delivery Time   Dauer, Edward
• [Elecraft] K4   Clay Autery
• [Elecraft] K4   Dave Fugleberg
• [Elecraft] K4   Clay Autery
• [Elecraft] Subject: Re: K4   Michael Murphy
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] Subject: Re: K4   Bob
• [Elecraft] K4?   Erik Basilier
• [Elecraft] KPA1500 S/N 160 delivered today   Bill Stravinsky
• [Elecraft] KPA-1500- occassional high SWR flashes   rlvz at aol.com
• [Elecraft] My weigh-in, K4   Dan Atchison
• [Elecraft] K2 RP3 thermistor board assembly   Mark Petrovic
• [Elecraft] My weigh-in, K4   David Ferrington, M0XDF
• [Elecraft] My weigh-in, K4   Chris Hallinan
• [Elecraft] K4?   Buddy Brannan
• [Elecraft] My weigh-in, K4   David Gilbert
• [Elecraft] My weigh-in, K4   Ken G Kopp
• [Elecraft] K4?   Heinz Baertschi
• [Elecraft] KPA1500 fan speed interrogation   ANDY DURBIN
• [Elecraft] K4?   Bill Stravinsky
• [Elecraft] My weigh-in, K4   Niel Skousen
• [Elecraft] My weigh-in, K4   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] My weigh-in, K4   Bob Gibson
• [Elecraft] New antenna?   Jeff Kinzli N6GQ
• [Elecraft] Closed threads   Wes Stewart
• [Elecraft] Test 2018-05-20   John Gibson
• [Elecraft] KPA1500 fan speed interrogation   Clay Autery
• [Elecraft] New antenna?   Wayne Burdick
• [Elecraft] KPA-1500 fan speeds and fan noise   rlvz at aol.com
• [Elecraft] Re - K4   Norm Lee
• [Elecraft] K4   Dan Baker
• [Elecraft] KPA-1500 fan noise and headphone use   rlvz at aol.com
• [Elecraft] New antenna?   rich hurd WC3T
• [Elecraft] New antenna?   Jeff Kinzli N6GQ
• [Elecraft] New antenna?   rich hurd WC3T
• [Elecraft] Test 2018-05-20   Chris Hallinan
• [Elecraft] Elecraft CW Net Report   kevinr
• [Elecraft] Test 2018-05-20   N3eta at coastside.net
• [Elecraft] K2 - Issue after installing K60XV   Neil Zampella
• [Elecraft] K2 - Issue after installing K60XV   Michael Eberle
• [Elecraft] kpa1500 new issue   Bill Stravinsky
• [Elecraft] KPA-1500 fan speeds and fan noise   Clay Autery
• [Elecraft] K2 - Issue after installing K60XV   paulb
• [Elecraft] K4   Petr, OK1RP/M0SIS
• [Elecraft] KPA1500 fan speeds and fan noise   Roy Koeppe
• [Elecraft] [K2] Using the K2 above 29 MHz   Steve Kavanagh
• [Elecraft] KPA1500 fan speeds and fan noise   Bill Stravinsky
• [Elecraft] Test 2018-05-21   John Gibson
• [Elecraft] KPA1500 fan speeds and fan noise   ANDY DURBIN
• [Elecraft] KPA1500 fan speeds and fan noise   Ed Gray W0SD
• [Elecraft] test   Fred Cady
• [Elecraft] KPA1500 fan speeds and fan noise   Roy Koeppe
• [Elecraft] KPS1500 fan noises   Roy Koeppe
• [Elecraft] OT: old ARRL RA handbook   Mike Maloney
• [Elecraft] KPA1500 fan speeds and fan noise   Bill Stravinsky
• [Elecraft] KPA1500 fan speeds and fan noise   Walter Underwood
• [Elecraft] KPA1500, First Impressions   K9MA
• [Elecraft] KPA1500 fan speeds and fan noise   hawley, charles j jr
• [Elecraft] KPA1500 fan speeds and fan noise   Bill Stravinsky
• [Elecraft] KPS1500 fan noises   Clay Autery
• [Elecraft] kpa1500 new issue   Bill Stravinsky
• [Elecraft] KPA1500 fan noises   Roy Koeppe
• [Elecraft] K3 for sale   DBB
• [Elecraft] Closed threads   Chris Hallinan
• [Elecraft] KPS1500 fan noises   Bob McGraw K4TAX
• [Elecraft] New antenna?   Skip Davis
• [Elecraft] OT: old ARRL RA Handbook info   Mike Maloney
• [Elecraft] setting up k3s to be used in conjunction with K3/0   Pete Block
• [Elecraft] setting up k3s to be used in conjunction with K3/0   David Shoaf
• [Elecraft] When to use the preamps on the KX2/KX3 vs. K3/K3S   Wayne Burdick
• [Elecraft] KPA1500 ATU   K9MA
• [Elecraft] KPA500 cooling and efficiency   ANDY DURBIN
• [Elecraft] KPA500 cooling and efficiency   K9MA
• [Elecraft] When to use the preamps on the KX2/KX3 vs. K3/K3S   na5n at zianet.com
• [Elecraft] Will the KPA 1500 operate RTTY in "run mode" for 48 hours?   Mack McCormick
• [Elecraft] Will the KPA 1500 operate RTTY in "run mode" for 48hours?   Roy Koeppe
• [Elecraft] Will the KPA 1500 operate RTTY in "run mode" for 48 hours?   john at kk9a.com
• [Elecraft] KPA500 cooling and efficiency   Charlie T
• [Elecraft] KPA1500 fan noises   Roy Koeppe
• [Elecraft] KPA500 cooling and efficiency   ANDY DURBIN
• [Elecraft] New wierd K3s behavior   Jim Miller
• [Elecraft] KPA1500 ATU   Buck
• [Elecraft] New wierd K3s behavior   Jim Miller
• [Elecraft] OT: old ARRL RA Handbook info   hawley, charles j jr
• [Elecraft] New wierd K3s behavior   john at kk9a.com
• [Elecraft] New wierd K3s behavior   Wes Stewart
• [Elecraft] New wierd K3s behavior   Tony Estep
• [Elecraft] New wierd K3s behavior   Jason Scobbie
• [Elecraft] Will the KPA 1500 operate RTTY in "run mode" for 48 hours?   Ed W0YK
• [Elecraft] K3S - Help me decide on which options to purchase   Michael Gillen
• [Elecraft] New wierd K3s behavior   Jim Miller
• [Elecraft] OT: old ARRL RA Handbook info   Kevin Cozens
• [Elecraft] When to use the preamps on the KX2/KX3 vs. K3/K3S (Wayne Burdick)   Michael Aust
• [Elecraft] DSP vs. non-DSP portable transceivers   Wayne Burdick
• [Elecraft] K2 - Issue after installing K60XV   Don Wilhelm
• [Elecraft] OT: old ARRL RA Handbook info   Phil Hystad
• [Elecraft] OT: old ARRL RA Handbook info   Mike Flowers
• [Elecraft] New wierd K3s behavior   Fred Jensen
• [Elecraft] New to Elecraft and my experience   James Cizek
• [Elecraft] New to Elecraft and my experience   Scott Manthe
• [Elecraft] DSP vs. non-DSP portable transceivers   Buck
• [Elecraft] DSP vs. non-DSP portable transceivers   Wayne Burdick
• [Elecraft] DSP vs. non-DSP portable transceivers   Lynn W. Taylor, WB6UUT
• [Elecraft] DSP vs. non-DSP portable transceivers   Jim Brown
• [Elecraft] OT: old ARRL RA Handbook info   Bob
• [Elecraft] FS: Rose's case for KX3   Phil Zminda
• [Elecraft] OT: old ARRL RA Handbook info   Walter Underwood
• [Elecraft] New to Elecraft and my experience   Clay Autery
• [Elecraft] Weird or wierd - OT   Dauer, Edward
• [Elecraft] New to Elecraft and my experience   Doug Turnbull
• [Elecraft] Weird or wierd - OT   Tony Estep
• [Elecraft] Weird or wierd - OT   Don Wilhelm
• [Elecraft] How to set fix-tune display mode   Mark Wheeler
• [Elecraft] P3: How to Get Frequency on top center of P3   Mark Wheeler
• [Elecraft] P3: How to save Span setting in function keys?   Mark Wheeler
• [Elecraft] PX3 Screen Issue   Joe Caldwell
• [Elecraft] KX3 station for sale   David F. Reed
• [Elecraft] When to use the preamps on the KX2/KX3 vs. K3/K3S   Edward R Cole
• [Elecraft] KPA1500 ATU   K9MA
• [Elecraft] New wierd K3s behavior   Henrik Stenstrom
• [Elecraft] KPA1500 Ethernet   John Langdon
• [Elecraft] How to set fix-tune display mode   Fred Jensen
• [Elecraft] New wierd K3s behavior   Michael Eberle
• [Elecraft] P3 SVGA - measuring occupied bandwidth   Richard Lamont
• [Elecraft] New wierd K3s behavior   Bob McGraw K4TAX
• [Elecraft] New wierd K3s behavior   Jim Miller
• [Elecraft] When to use the preamp on the K3/K3S   Bob McGraw K4TAX
• [Elecraft] P3 SVGA - measuring occupied bandwidth   Joe Subich, W4TV
• [Elecraft] KPA1500, First Contest   K9MA
• [Elecraft] When to use the preamp on the K3/K3S   K9MA
• [Elecraft] DSP vs. non-DSP portable transceivers   Ignacy
• [Elecraft] KPA1500, First Contest   Bill Stravinsky
• [Elecraft] DSP vs. non-DSP portable transceivers   Fred Jensen
• [Elecraft] K3 IF Out Question   Rich
• [Elecraft] K3 IF Out Question   Wes Stewart
• [Elecraft] P3: How to Get Frequency on top center of P3   Nr4c
• [Elecraft] How to set fix-tune display mode   Nr4c
• [Elecraft] P3: How to Get Frequency on top center of P3   Don Wilhelm
• [Elecraft] P3: How to Get Frequency on top center of P3   Fred Jensen
• [Elecraft] n00b Amp question   richard kappler
• [Elecraft] n00b Amp question   Dennis Moore
• [Elecraft] n00b Amp question   David Bunte
• [Elecraft] When to use the preamp on the K3/K3S   Al Lorona
• [Elecraft] New to Elecraft and my experience   Al Lorona
• [Elecraft] When to use the preamp on the K3/K3S   Lyle Johnson
• [Elecraft] Ed Re: KPA-1500 Question   rlvz at aol.com
• [Elecraft] P3 SVGA schematics and usb port   Jim Shepherd
• [Elecraft] When to use the preamp on the K3/K3S   Don Wilhelm
• [Elecraft] P3 SVGA - measuring occupied bandwidth   Jim Brown
• [Elecraft] P3 SVGA - measuring occupied bandwidth   Jim Brown
• [Elecraft] When to use the preamp on the K3/K3S   K9MA
• [Elecraft] No Tune Power Output While Split in Data Mode   AL7CR
• [Elecraft] No Tune Power Output While Split in Data Mode   Don Wilhelm
• [Elecraft] New wierd K3s behavior   C L Jonkers
• [Elecraft] No Tune Power Output While Split in Data Mode   Bob McGraw K4TAX
• [Elecraft] P3: How to Get Frequency on top center of P3   Mark Wheeler
• [Elecraft] P3: How to Get Frequency on top center of P3 (Mark Wheeler)   Mark Wheeler
• [Elecraft] P3: How to Get Frequency on top center of P3 (Mark Wheeler)   Grant Youngman
• [Elecraft] n00b Amp question   Jack Brindle
• [Elecraft] New to Elecraft and my experience   Jim Rhodes
• [Elecraft] No Tune Power Output While Split in Data Mode   Michael Eberle
• [Elecraft] KX3 station for sale   David F. Reed
• [Elecraft] Tuner ranges   Michael K Bottles
• [Elecraft] P3: How to Get Frequency on top center of P3   Don Wilhelm
• [Elecraft] Tuner ranges   Victor Rosenthal 4X6GP
• [Elecraft] Terminators on empty outputs/connectors   Clay Autery
• [Elecraft] P3: How to Get Frequency on top center of P3   Mark Wheeler
• [Elecraft] K3 FT8 WSJT-X Setup   William Liporace
• [Elecraft] K3 FT8 WSJT-X Setup   Don Wilhelm
• [Elecraft] K3 FT8 WSJT-X Setup   William Liporace
• [Elecraft] No Tune Power Output While Split in Data Mode   Wes Stewart
• [Elecraft] No Tune Power Output While Split in Data Mode   ANDY DURBIN
• [Elecraft] Terminators on empty outputs/connectors   Wes Stewart
• [Elecraft] No Tune Power Output While Split in Data Mode   Wes Stewart
• [Elecraft] Tuner ranges   hawley, charles j jr
• [Elecraft] OT Tuner ranges   Bob McGraw K4TAX
• [Elecraft] SubRX Freq on Panadapter   Chris Hallinan
• [Elecraft] OT Tuner ranges   Don Wilhelm
• [Elecraft] PX3 Screen Issue   bill steffey
• [Elecraft] PX3 Screen Issue   Joe Caldwell
• [Elecraft] Terminators on empty outputs/connectors   Clay Autery
• [Elecraft] OT Tuner ranges   Ignacy
• [Elecraft] OT Tuner ranges   Bob McGraw K4TAX
• [Elecraft] Terminators on empty outputs/connectors   Jim Brown
• [Elecraft] Terminators on empty outputs/connectors   Edward R Cole
• [Elecraft] OT Tuner ranges   Bob McGraw K4TAX
• [Elecraft] K2 Build: Options Advice   AE0MM
• [Elecraft] K2 Build: Options Advice   EricJ
• [Elecraft] Question on connection of P3 Tx Mon with KPA1500   W1PEF
• [Elecraft] PX3 Screen Issue   John_N1JM
• [Elecraft] K2 Build: Options Advice   Don Wilhelm
• [Elecraft] K2 Build: Options Advice   AE0MM
• [Elecraft] K3 KIO3 Board   Jorge Mejia P
• [Elecraft] K3 - USB   N2TK, Tony
• [Elecraft] K3 - USB   N2TK, Tony
• [Elecraft] K3 - USB   N2TK, Tony
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   eric norris
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   Bob McGraw K4TAX
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   Wes Stewart
• [Elecraft] KX3 station for sale   David F. Reed
• [Elecraft] Wanted: KXPA100   Eddy Avila
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   Jim Brown
• [Elecraft] Fwd: KPA1500 Order from 10/16   Tom Schaefer
• [Elecraft] KPA1500 Remote Program   N2TK, Tony
• [Elecraft] K3 - USB   Don Wilhelm
• [Elecraft] KX3 in International carry-on luggage?   Gerry Hull
• [Elecraft] KX3 in International carry-on luggage?   Ka7phr
• [Elecraft] KX3 in International carry-on luggage?   Michael Murphy
• [Elecraft] KX3 in International carry-on luggage?   Gerry Hull
• [Elecraft] KX3 in International carry-on luggage?   allen Montoye
• [Elecraft] KX3 in international carry-on luggage   Dennis Haarsager
• [Elecraft] KX3 in International carry-on luggage?   Buck
• [Elecraft] KX3 in International carry-on luggage?   Mike Markowski
• [Elecraft] KX3 in International carry-on luggage?   John Perlick
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   ANDY DURBIN
• [Elecraft] KX3 in International carry-on luggage?   Carl Jón Denbow
• [Elecraft] KX3 in International carry-on luggage?   john at kk9a.com
• [Elecraft] FS: Rose's Cases KX3 Padded Case   Phil Zminda
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   K9MA
• [Elecraft] K2 - Issue after installing K60XV   Neil Zampella
• [Elecraft] Tuneup, Rescue, Build your K2 and others   Alan D. Wilcox
• [Elecraft] K3 - USB   Fred Jensen
• [Elecraft] K3 - USB   N2TK, Tony
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   Wes Stewart
• [Elecraft] K2 Build: Options Advice   David Woolley
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   Jim Brown
• [Elecraft] KX3 station for sale - SOLD   David F. Reed
• [Elecraft] PX3 Screen Issue [clarification on repair/replacement]   Wayne Burdick
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   Bill Johnson
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   Bill Frantz
• [Elecraft] Too Much Power   Richard
• [Elecraft] Too Much Power   Jack Brindle
• [Elecraft] K2 Build: Options Advice   Dauer, Edward
• [Elecraft] No Tune Power Output While Split in Data Mode   Bill Mader
• [Elecraft] Ham radio as a side dish   Wayne Burdick
• [Elecraft] Does KPA1500 have these KPA500 characteristics?   Wes Stewart
• [Elecraft] Field repairs to K3s   Gerald Capodieci
• [Elecraft] Field repairs to K3s   na5n at zianet.com
• [Elecraft] Ham radio as a side dish   Chris Hallinan
• [Elecraft] Ham radio as a side dish   Dave Sublette
• [Elecraft] Ham radio as a side dish   rich hurd WC3T
• [Elecraft] Field repairs to K3s   john at kk9a.com
• [Elecraft] Ham radio as a side dish   Phil Hystad
• [Elecraft] Art of Electronics   K8TE
• [Elecraft] Ham radio as a side dish   Stan Horzepa
• [Elecraft] KX3 2M module SMA connector loosening   Ryan Noguchi
• [Elecraft] Field repairs to K3s   Grant Youngman
• [Elecraft] Ham radio as a side dish   Bob McGraw K4TAX
• [Elecraft] Field repairs to K3s   Gerald Capodieci
• [Elecraft] K2 Build: Options Advice   Peter Wollan
• [Elecraft] Art of Electronics   Dave Fugleberg
• [Elecraft] Ham radio as a side dish   Phil Hystad
• [Elecraft] Ham radio as a side dish   Bjorn Pehrson
• [Elecraft] Ham radio as a side dish   Wayne Burdick
• [Elecraft] Field repairs to K3s   Drew AF2Z
• [Elecraft] Ham radio as a side dish   Martin Sole
• [Elecraft] KX3 2M module SMA connector loosening   Mike Parkes
• [Elecraft] Looking for RFI snapshots from P3...   Dave Cole (NK7Z)
• [Elecraft] Too Much Power   Jack Brindle
• [Elecraft] Ham radio as a side dish   Barry
• [Elecraft] Ham radio as a side dish   Wayne Burdick
• [Elecraft] Field repairs to K3s   Bob McGraw K4TAX
• [Elecraft] Ham radio as a side dish   Michael Eberle
• [Elecraft] Field repairs to K3s   john at kk9a.com
• [Elecraft] Too Much Power   Joseph Reed
• [Elecraft] KX3 2M module SMA connector loosening   Mike Parkes
• [Elecraft] PA DISS fault and relationship to SWR   ANDY DURBIN
• [Elecraft] K2 Build: Options Advice   Neil Zampella
• [Elecraft] Too Much Power   Joe Subich, W4TV
• [Elecraft] Too Much Power   Carl Yaffey
• [Elecraft] KX3 2M module SMA connector loosening   ka9p at aol.com
• [Elecraft] Ham radio as a side dish   Edward R Cole
• [Elecraft] Ham radio as a side dish   ANDY DURBIN
• [Elecraft] Field repairs to K3s   Don Wilhelm
• [Elecraft] Too Much Power   jeff griffin
• [Elecraft] Too Much Power   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] First solid state QSK rig   Tom Boucher
• [Elecraft] Too Much Power   Richard
• [Elecraft] KX3 2M module SMA connector loosening   Don Wilhelm
• [Elecraft] Ham radio as a side dish   Edward R Cole
• [Elecraft] KX3 2M module SMA connector loosening   Clay Autery
• [Elecraft] Too Much Power   Edward R Cole
• [Elecraft] P3 problem...   Doug Eaton
• [Elecraft] P3 problem...   Grant Youngman
• [Elecraft] P3 problem...   Michael Blake
• [Elecraft] Too Much Power   Dave Cole (NK7Z)
• [Elecraft] Field repairs to K3s   Walter Underwood
• [Elecraft] P3 problem...   Dale Boresz
• [Elecraft] P3 problem   Doug Eaton
• [Elecraft] Ham radio as a side dish   Michael Eberle
• [Elecraft] Ham radio as a side dish   Chuck Chandler
• [Elecraft] Ham radio as a side dish   kstover at ac0h.net
• [Elecraft] KX3 2M module SMA connector loosening   kstover at ac0h.net
• [Elecraft] Art of Electronics   Josh Fiden
• [Elecraft] Ham Radio as a Side Dish   Dauer, Edward
• [Elecraft] Ham Radio as a Side Dish   Roger Stein
• [Elecraft] PX3 Screen Issue [clarification on repair/replacement]   John_N1JM
• [Elecraft] P3 problem   Keith Onishi
• [Elecraft] A little late, but.... CQ WPX (CW) going on right now   Wayne Burdick
• [Elecraft] PX3 Screen Issue [clarification on repair/replacement]   Don Wilhelm
• [Elecraft] PX3 Screen Issue [clarification on repair/replacement]   John_N1JM
• [Elecraft] KX3 2M module SMA connector loosening   Ryan Noguchi
• [Elecraft] A little late, but.... CQ WPX (CW) going on right now   Dwight Anderson
• [Elecraft] Too Much Power   Jim - N4ST
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] Ham radio as a side dish   Bill Frantz
• [Elecraft] Ham radio as a side dish   Glen Torr
• [Elecraft] K3 - Amplifier Recognition   bw396ss at yahoo.com
• [Elecraft] [KX3] A little late, but.... CQ WPX (CW) going on right now   Richard Thorne
• [Elecraft] A little late, but.... CQ WPX (CW) going on right now   John Harper
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Mark Wheeler
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   G4GNX
• [Elecraft] High band opening right now (15 and 10 m)   Wayne Burdick
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Michael Eberle
• [Elecraft] FT-8   Edmund T. Wright
• [Elecraft] How to use LCD TV for P3 monitor?   Mark Wheeler
• [Elecraft] How to use LCD TV for P3 monitor?   James Wilson
• [Elecraft] How to use LCD TV for P3 monitor?   Barry Baines
• [Elecraft] How to use LCD TV for P3 monitor?   Don Wilhelm
• [Elecraft] How to use LCD TV for P3 monitor?   Phil Kane
• [Elecraft] How to use LCD TV for P3 monitor?   Mark Wheeler
• [Elecraft] How to use LCD TV for P3 monitor?   Mark Wheeler
• [Elecraft] Elecraft CW Net Report   kevinr
• [Elecraft] How to use LCD TV for P3 monitor?   Phil Hystad
• [Elecraft] How to use LCD TV for P3 monitor?   Michael Blake
• [Elecraft] How to use LCD TV for P3 monitor?   Jim Shepherd
• [Elecraft] K3S Won't Power Up / Obvious Things checked...   M. George
• [Elecraft] SMA Wrenches   Bob DeHaney
• [Elecraft] KX3 2M module SMA connector loosening   Petr, OK1RP/M0SIS
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Mark Wheeler
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Mark Wheeler
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Mark Wheeler
• [Elecraft] PA DISS fault and relationship to SWR   ANDY DURBIN
• [Elecraft] PA DISS fault and relationship to SWR   Michael Blake
• [Elecraft] PA DISS fault and relationship to SWR   ANDY DURBIN
• [Elecraft] PA DISS fault and relationship to SWR   Michael Blake
• [Elecraft] How to use LCD TV for P3 monitor?   Richard Donner
• [Elecraft] K3 - Amplifier Recognition   Bill Wiehe
• [Elecraft] 2nd Report   Richard Zalewski
• [Elecraft] K3 - Amplifier Recognition   Bill Stravinsky
• [Elecraft] 2nd Report   Bill Stravinsky
• [Elecraft] 2nd Report   Paul Baldock
• [Elecraft] 2nd Report   Drew AF2Z
• [Elecraft] 2nd Report   Bob McGraw K4TAX
• [Elecraft] OT antenna question   Michael Blake
• [Elecraft] K3 SSB +CW Power Overshoot   Dan Maase
• [Elecraft] OT antenna question   John Oppenheimer
• [Elecraft] TX Sample level on KPA1500?   Jim Miller
• [Elecraft] How to connect P3 to LCD TV via HDMI port   Mark Wheeler
• [Elecraft] KX2 "SWR/RF" display in v2.89   Steve Sergeant
• [Elecraft] Ham radio as a side dish   Terry Schieler
• [Elecraft] K3 SSB +CW Power Overshoot   Josh Fiden
• [Elecraft] KPA1500 fan noise concern   Ralph Parker
• [Elecraft] K3 SSB +CW Power Overshoot   Dan Maase
• [Elecraft] K3 SSB +CW Power Overshoot   K8TE
• [Elecraft] Elecraft CW Net Announcement   K8TE
• [Elecraft] K3 SSB +CW Power Overshoot   Josh Fiden
• [Elecraft] Ham radio as a side dish   Lee Ormiston
• [Elecraft] OT antenna question   Michael Blake
• [Elecraft] KPA1500 fan noise concern   K9MA
• [Elecraft] KPA1500 fan noise concern   Carl Yaffey
• [Elecraft] Ham radio as a side dish   K8TE
• [Elecraft] OT antenna question   Jim Brown
• [Elecraft] KPA1500 fan noise concern   Jim Brown
• [Elecraft] 2nd Report   Richard Zalewski
• [Elecraft] Any Panadaptor apps for iPad for KX3?   Gerry Hull
• [Elecraft] TX Sample level on KPA1500?   Wayne Burdick
• [Elecraft] KX2 "SWR/RF" display in v2.89   Brian Hunt
• [Elecraft] OT antenna question   Clay Autery
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Wayne Burdick
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Wayne Burdick
• [Elecraft] KPA1500 fan noise concern   Clay Autery
• [Elecraft] OT antenna question   David Gilbert
• [Elecraft] 2nd Report   Clay Autery
• [Elecraft] KPA1500 fan noise concern   Wayne Burdick
• [Elecraft] OT antenna question   Clay Autery
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Don Sayler
• [Elecraft] OT antenna question   Fred Jensen
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Clay Autery
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Tom
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Mark Wheeler
• [Elecraft] OT antenna question   Jim Brown
• [Elecraft] KPA1500 fan noise concern   john at kk9a.com
• [Elecraft] OT antenna question   Wes Stewart
• [Elecraft] PARA News Letter   Phillip Cowherd
• [Elecraft] KX2 "SWR/RF" display in v2.89   Steve Sergeant
• [Elecraft] KX2 "SWR/RF" display in v2.89   Grant Youngman
• [Elecraft] Stop pub   Louis Chastagner
• [Elecraft] KX2 "SWR/RF" display in v2.89   Steve Sergeant
• [Elecraft] Using SDR Play with KX3 Ocsilator Noise?   Fred Nassar
• [Elecraft] power connector part number   James Cizek
• [Elecraft] Using SDR Play with KX3 Ocsilator Noise?   Wayne Burdick
• [Elecraft] Using SDR Play with KX3 Ocsilator Noise?   Walter Underwood
• [Elecraft] Using SDR Play with KX3 Ocsilator Noise?   Bob McGraw K4TAX
• [Elecraft] K3 - Amplifier Recognition   Wayne Burdick
• [Elecraft] K3 - Amplifier Recognition   Grant Youngman
• [Elecraft] KPA1500 fan noise concern   Bill Stravinsky
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Bill Johnson
• [Elecraft] K3 SSB +CW Power Overshoot   Dan Maase
• [Elecraft] OT antenna question   Fred Jensen
• [Elecraft] KPA1500 remote program   N2TK, Tony
• [Elecraft] For those keeping track   Paul Van Dyke
• [Elecraft] KPA1500 remote program   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Clay Autery
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Bill Johnson
• [Elecraft] KPA1500 fan noise concern   john at kk9a.com
• [Elecraft] KPA1500 fan noise concern   Jorge Diez (CX6VM-CW5W)
• [Elecraft] K3S USB Drivers   Rich
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Clay Autery
• [Elecraft] K3 SSB +CW Power Overshoot   Dan Maase
• [Elecraft] KPA1500 Remote Program   Rick Tavan
• [Elecraft] K3S USB Drivers   Ian White
• [Elecraft] [K3] Add to NTCH and APF   Petr, OK1RP/M0SIS
• [Elecraft] KPA1500 Remote Program   N2TK, Tony
• [Elecraft] FS - K3S and P3 Combo   C David Elliott
• [Elecraft] KPA1500 Remote Program   N2TK, Tony
• [Elecraft] KPA1500 fan noise concern   N2TK, Tony
• [Elecraft] 2nd Report   N2TK, Tony
• [Elecraft] KPA1500 fan noise concern   john at kk9a.com
• [Elecraft] K3S USB Drivers   Victor Rosenthal 4X6GP
• [Elecraft] KPA1500 Drive Power   K9MA
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Mark Wheeler
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Wayne Burdick
• [Elecraft] K3 serial port fix?   David F. Reed
• [Elecraft] K3S USB Drivers   Ian White
• [Elecraft] K3S USB Drivers   Jim Brown
• [Elecraft] Potential Solution for: Windows 10 USB problems after UPDATE(AKA: K3s USB/Driver issues)   Clay Autery
• [Elecraft] K3S USB Drivers   Clay Autery
• [Elecraft] K3S USB Drivers   Ian White
• [Elecraft] KPA1500 issue   Carl Yaffey
• [Elecraft] KPA1500 Drive Power   Bill Stravinsky
• [Elecraft] KPA1500 Drive Power   Paul Baldock
• [Elecraft] KPA1500 Drive Power   K9MA
• [Elecraft] More on KPA1500 lcd   Carl Yaffey
• [Elecraft] KPA1500 Drive Power   K9MA
• [Elecraft] More on KPA1500 lcd   K9MA
• [Elecraft] More on KPA1500 lcd   Carl Yaffey
• [Elecraft] More on KPA1500 lcd   Mel Farrer
• [Elecraft] More on KPA1500 lcd   N2TK, Tony
• [Elecraft] KPA1500 Drive Power   Don Butler
• [Elecraft] KPA1500 Drive Power   john at kk9a.com
• [Elecraft] KPA1500 Drive Power   Rick Tavan
• [Elecraft] LCD issue   Carl Yaffey
• [Elecraft] More on KPA1500 lcd   Carl Yaffey
• [Elecraft] More on KPA1500 lcd   Carl Yaffey
• [Elecraft] LCD issue   Mel Farrer
• [Elecraft] K3 USB Drivers   Dauer, Edward
• [Elecraft] K3 USB Drivers   Lynn W. Taylor, WB6UUT
• [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities   Rich
• [Elecraft] KPA1500 Drive Power   K9MA
• [Elecraft] KPA1500 Drive Power   Michael Blake
• [Elecraft] KX3 Newbie question...   Gerry Hull
• [Elecraft] KX3 Newbie question...   Michael Blake
• [Elecraft] KX3 Newbie question...   Grant Youngman
• [Elecraft] KX3 Newbie question...   Grant Youngman
• [Elecraft] KX3 Newbie question...   Wayne Burdick
• [Elecraft] KX3 Newbie question...   Gerry Hull
• [Elecraft] Keep getting BAT Err message   Bob G3PJT
• [Elecraft] K3 Autoinfo speed - different with USB?   gt-i at gmx.net
• [Elecraft] KX3 Newbie question...   Michael Murphy
• [Elecraft] KPA1500 Drive Power   K9MA
• [Elecraft] KPA1500 Drive Power   Jim Brown
• [Elecraft] Keep getting BAT Err message   Don Wilhelm
• [Elecraft] K3 Autoinfo speed - different with USB?   Don Wilhelm
• [Elecraft] K3 Autoinfo speed - different with USB?   gt-i at gmx.net
• [Elecraft] KX3 Newbie question...   Don Wilhelm
• [Elecraft] Keep getting BAT Err message   rich hurd WC3T
• [Elecraft] KX3 Newbie question...   Lynn W. Taylor, WB6UUT
• [Elecraft] Cause of KPA1500 SWR bar graph fluctuations identified & fixed   Wayne Burdick
• [Elecraft] K3x Reliability? How many have been returned for repair?   Gerald Capodieci
• [Elecraft] K3x Reliability? How many have been returned for repair?   N4OI - Ken
• [Elecraft] KX3 Newbie question...   Nr4c
• [Elecraft] K3x Reliability? How many have been returned for repair?   Don Wilhelm

Last message date: Thu May 31 23:46:34 EDT 2018
Archived on: Thu May 31 23:46:38 EDT 2018

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...