[Elecraft] Too Much Power

Jim - N4ST Hamshack at N4ST.com
Sun May 27 00:59:48 EDT 2018


Jack,

I just assumed you were throwing in an extra 8 db for the difference between a beam and a wire dipole.

_____________ 
73,
Jim - N4ST

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Jack Brindle
Sent: Saturday, May 26, 2018 13:04
To: Elecraft Reflector <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] Too Much Power

Let me correct myself before others do. Its a 12db difference. And I will rib Bill about it. Still, to the west and north he has very high hills/mountains that block the RF path. Makes me wonder if he was using reverse path for the QSOs.

73,
Jack, W6FB

> On May 25, 2018, at 4:32 PM, Jack Brindle <jackbrindle at me.com> wrote:
> 
> I’ve seen Bill’s setup. 50 watts with a decent gain antenna (i.e. beam) is equivalent to 800 watts with Bill’s antenna and QTH. He really has done an outstanding job with the resources he has to work with.
> Also remember, we are talking about a 4 to 5 db difference in power here. And when you have pretty large mountains blocking your path to JA and EU, that 4db of power can make a huge difference.
> QTH and the antenna system really make a huge difference! 
> 
> 73,
> Jack, W6FB
> 
> 
>> On May 25, 2018, at 4:15 PM, Richard <FlatHat at comcast.net> wrote:
>> 
>> “I have a couple of FT8 contacts in my log -- with a DU and a JA -- reporting me at -24 dB where I WAS OPERATING AT 800 WATTS. YMMV.”
>> 
>> Why do you think you need 800 watts in a weak signal mode? Do you have any idea what that does to other operators? I’ve made several 10,000+ mile contacts with 50 watts, as have others who are following the “rules.” 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html Message delivered to 
>> jackbrindle at me.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> jackbrindle at me.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to hamshack at n4st.com



More information about the Elecraft mailing list