[Elecraft] K3 - USB

[Don Wilhelm]

Tony,

The computer must also enumerate a COM port that is associated with the 
adapter in the K3(S).

If it goes not, go to the FTDI website and download the drivers.

73,
Don W3FPR

On 5/24/2018 6:49 PM, N2TK, Tony wrote:
> Hooked up my backup K3 so I could add a mod on the other K3. I can't connect
> to USB anymore with the backup K3.
> 
> Verified that USB is selected in Config > RS232 > USB.
> 
> Swapped the KIO3B Digital I/O board between the two rigs. I can't transfer
> the problem.
> 
> The only thing plugged into both rigs is the Powerpole and USB cable.
> 
> I am using the same USB cable to go between both rigs.
> 
> In Win 10 >Device Manager > Universal serial bus controller, I see added
> "Generic USB Hub" when I plug in the USB cable.
> 
>   
> 
> What could I be missing or check?
> 
> Tnx for any feedback
> 
> N2TK, Tony
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>