[Elecraft] K3 - USB

[N2TK, Tony]

Hmmm. On the one rig USB and RS232 works fine. On the other rig RS232 works
but not USB.
N2TK, Tony

-----Original Message-----
From: N2TK, Tony [mailto:tony.kaz at verizon.net] 
Sent: Thursday, May 24, 2018 7:04 PM
To: 'elecraft at mailman.qth.net' <elecraft at mailman.qth.net>
Subject: RE: [Elecraft] K3 - USB

Tried swapping the KIO3B Main Board. Something on the board broke. Guess I
need to order another board.
N2TK, Tony


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of N2TK, Tony
Sent: Thursday, May 24, 2018 6:49 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 - USB

Hooked up my backup K3 so I could add a mod on the other K3. I can't connect
to USB anymore with the backup K3. 

Verified that USB is selected in Config > RS232 > USB.

Swapped the KIO3B Digital I/O board between the two rigs. I can't transfer
the problem.

The only thing plugged into both rigs is the Powerpole and USB cable. 

I am using the same USB cable to go between both rigs.  

In Win 10 >Device Manager > Universal serial bus controller, I see added
"Generic USB Hub" when I plug in the USB cable.

 

What could I be missing or check?

Tnx for any feedback

N2TK, Tony

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to tony.kaz at verizon.net