[Elecraft] K3 EQ settings?

[Walter Underwood]

The Wizkers program also does this, along with other things.

I collected TX EQ settings from posts to this mailing list and wrote that up a couple of years ago. The blog post is here. The title says “KX3”, but it is the same for the K3. Or any radio, really, because this is about voice, not the rig.

https://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On May 6, 2018, at 12:55 PM, Mike Markowski <mike.ab3ap at gmail.com> wrote:
> 
> I just finished writing a python program to make it easier to control the K3 internal EQs.  The impetus is to easily adjust in response to on-air reports, or to adjust when using MON to listen to myself in headphones.
> 
> One of the things I've done is to include a file of presets drawing from recommendations of knowledgeable hams.  An example is shown at:
> 
>   http://udel.edu/~mm/ham/elecraft/python/
> 
> Are there are other recommendations from anyone?  I'm especially looking for recommendations coming from those with substantial audio background.  The idea is for us audio neophytes to steal, er, learn from the learned!
> 
> I'm restoring a Heathkit line of DX-60B xmtr, HR-10G vfo, and HR10 rcvr.  The DX-60B is cw or am, so I've become interested in AM settings of late.  :-)
> 
> Tnx es 73!
> Mike ab3ap
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org