[Elecraft] KPA1500 fan noise concern
Bill Stravinsky
k3wjv at yahoo.com
Tue May 29 14:40:43 EDT 2018
John
I would imagine the 1500 will be remotable just as the 500 is. A friend of mine remotes his 500 to the basement just as he did with his Acom 2000aand he is investigating remoting the 1500 he just got. As for a control box I don't know. Not sure if the amp faults will be visible in the vfo B area ofthe K3. It tells you its on-off or in standby.
BillK3WJV
On Monday, May 28, 2018, 9:18:04 PM EDT, john at kk9a.com <john at kk9a.com> wrote:
I imagine that due to the KPA1500's size it requires a higher volume of air
than a large amplifier would. Its small size and weight make it appealing.
The Acom 2000 has a control box that is separate from the amp so you really
never hear the amp run. I am wondering it something similar can be done with
the Elecraft KPA1500, perhaps an option like the K-Pod, so that the noise
source is further from the operating position?
John KK9A
Thanks for the offer, Clay. But we actually did extensive thermal analysis
of both the heat sink and fans, tested many different fan types and
configurations, and did comparative noise testing of the KPA1500 vs. a
number of other amps.
As you allude to, there's no magic bullet. Heat must be removed, with
various physical and electrical constraints to be satisfied.
We have some pretty amazing thermal imaging devices that we use to examine
heat signatures of electrical components. These were used during R&D, which
is how we determined that two LDMOS devices were far better than one for
heat distribution. We also used it to evaluate the design of our very
large/very thick copper heat spreader. On the production line, we review all
modules for hot spots during burn-in and make sure the cooling is working
perfectly (onset temperature, air distribution around modules, etc.).
Of course supplemental cooling of various types has been used with
amplifiers in the past. I believe we have a couple of customers and staff
experimenting with this idea, and anything that emerges will be posted here.
73,
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k3wjv at yahoo.com
More information about the Elecraft
mailing list