[Elecraft] Stuck KX3 LED segment

[Peter LaBissoniere]

I’m the culprit. Running FT8, I had AGC off and rode the RF Gain but I don’t recall this happening previously. 

Sent from my iPhone

> On May 4, 2018, at 7:47 PM, Chris <CGarbage1 at optonline.net> wrote:
> 
> If you don't recall having changed RF Gain recently, I'll note the default value in my rig control software (FLRig) did this to me when I first installed it.
> 
> --Chris (KD2FLH)
> 
>> On May 4, 2018 8:29:11 PM EDT, Peter LaBissoniere <kw9e at wi.rr.com> wrote:
>> Bingo!
>> It was at -20. It’s usually something simple or overlooked. Thanks Michael. 
>> 
>> Sent from my iPhone
>> 
>>>  On May 4, 2018, at 7:21 PM, Michael Blake <k9jri at mac.com> wrote:
>>>  
>>>  RF Gain not turned down?
>>>  
>>>  Michael Blake
>>>  k9jri at mac.com
>>>  
>>>  
>>>>  On May 4, 2018, at 20:08, kw9e <kw9e at wi.rr.com> wrote:
>>>>  
>>>>  My KX3 has a stuck segment (always on) in about the middle of the S-Meter
>>>>  display. Power cycle/disconnect isn’t clearing it. Any ideas other than a
>>>>  firmware reload?
>>>>  Thanks,
>>>>  
>>>>  Pete - KW9E 
>>>>  
>>>>  
>>>>  
>>>>  --
>>>>  Sent from: http://elecraft.365791.n2.nabble.com/
>>>> 
>>>>  Elecraft mailing list
>>>>  Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>  Help: http://mailman.qth.net/mmfaq.htm
>>>>  Post: mailto:Elecraft at mailman.qth.net
>>>>  
>>>>  This list hosted by: http://www.qsl.net
>>>>  Please help support this email list: http://www.qsl.net/donate.html
>>>>  Message delivered to k9jri at mac.com
>> 
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to cgarbage1 at optonline.net