[Elecraft] Stuck KX3 LED segment

[Chris]

If you don't recall having changed RF Gain recently, I'll note the default value in my rig control software (FLRig) did this to me when I first installed it.

--Chris (KD2FLH)

On May 4, 2018 8:29:11 PM EDT, Peter LaBissoniere <kw9e at wi.rr.com> wrote:
>Bingo!
>It was at -20. It’s usually something simple or overlooked. Thanks
>Michael. 
>
>Sent from my iPhone
>
>> On May 4, 2018, at 7:21 PM, Michael Blake <k9jri at mac.com> wrote:
>> 
>> RF Gain not turned down?
>> 
>> Michael Blake
>> k9jri at mac.com
>> 
>> 
>>> On May 4, 2018, at 20:08, kw9e <kw9e at wi.rr.com> wrote:
>>> 
>>> My KX3 has a stuck segment (always on) in about the middle of the
>S-Meter
>>> display. Power cycle/disconnect isn’t clearing it. Any ideas other
>than a
>>> firmware reload?
>>> Thanks,
>>> 
>>> Pete - KW9E 
>>> 
>>> 
>>> 
>>> --
>>> Sent from: http://elecraft.365791.n2.nabble.com/
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to k9jri at mac.com
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to cgarbage1 at optonline.net