[Elecraft] KX3BNCMDKT - BNC upgrade

[rich hurd WC3T]

I purchased it as a replacement BNC connector for my KX3, as I had, through
testing, determined that my connector was bad.  (The hypothesis was that it
had a deformed center jack by another user using a 75-ohm BNC cable, but
that was not conclusively proven.)

It was an easy replacement (except for the struggle to put the ATU back in
- make sure you line up the connector pins) and the KX3 is now working FB
once again.

I have no experience in using that versus the regular BNC connector; that
was what was told to me as the replacement BNC going forward.

On Tue, May 15, 2018 at 8:26 AM Petr, OK1RP/M0SIS <indians at xsmail.com>
wrote:

> KX3BNCMDKT Upgraded BNC connector for KX3. (User installed)  Includes an
> integral VHF/UHF filter to reduce the possibility of weak signal
> interference to very close by VHF/UHF radios, HTs etc.  Not required for
> normal KX3 operation.
>
> Hi all,
>
> is there anybody who has experiences with this modification please?
> I wonder how it looks like (some pics) and if it is necessary, helpful,
> mandatory, "is a must" or what?
>
> Thanks for info,
> 73 - Petr, OK1RP
>
>
>
> -----
> http://ok1rp.blogspot.com
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rich at wc3t.us
>


-- 
72,
Rich Hurd / WC3T / DMR: 3142737
PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer
for Scouting
Latitude: 40.761621 Longitude: -75.288988  (40°45.68' N 75°17.33' W) Grid:
*FN20is*