[Elecraft] K2 - Issue after installing K60XV

[Don Wilhelm]

Neil,

Did you set the secondary menu D19 parameter to "Y"?

If you have the KAT2 installed, be certain the change KAT2 R6 to 470 
ohms, there is a resistor provided in the K60XV kit for that.

73,
Don W3FPR

On 5/20/2018 11:27 PM, Neil Zampella wrote:
> Hi all ..
> 
> has anyone seen this type of issue with their K2.   Before installing 
> the K60XV, I had no problems seeing 10 w on 40 meters.   After 
> installing the K60XV, I can't get above 1 watt on 40 meters OR 60 meters.
> 
> Did I screw something up, or is there some menu setting I missed when I 
> did the installation?
>