[Elecraft] How to use LCD TV for P3 monitor?

Mark Wheeler mark3575 at icloud.com
Sun May 27 20:21:01 EDT 2018


Barry,

Great info. Thank you.

Mark
WU6R 

> On May 27, 2018, at 6:55 PM, Barry Baines <bbaines at mac.com> wrote:
> 
> Mark:
> 
>> On May 27, 2018, at 4:18 PM, Mark Wheeler <mark3575 at icloud.com> wrote:
>> 
>> I am trying to connect a 22” LCD TV to the P3 SVGA connection via the TV HDMI connection. I purchased a 9 pin serial to HDMI cable but the P3 does not appear to see it. I switched to the 2nd HDMI port on the TV, but still no joy. I have enabled the SVGA monitor option in the P3 menu settings also.  Any suggestions?
> 
> The P3 has a 15-pin connector (5-5-5 pins per row) for SVGA which provides an analog video output.  It is not a 9-pin serial output as you mentioned above.  The 9-pin RS-232 serial ports located next to the SVGA port (if installed) the P3 are for interconnecting the P3 to the K3 (“XCVR”) and Personal Computer.  So the first thing to check is to ensure that the SVGA video port is indeed installed.
> 
> On-the-surface, it appears you’ll need a SVGA-to-HDMI converter to convert an analog signal from the P3 to a digital signal compatible with HDMI.  SVGA was initially defined as  1024 x 768 8-bit resolution, but the P3 P3 SVGA adapter can handle up to 1920 x 1080 resolution (See: “P3SVGA Option Installation and Operating Instructions” p. 3 that is available on the Elecraft website) so make certain that whatever device you purchase is compatible with the resolution levels of the P3SVGA.  
> 
>> 
>> I do see on Amazon that I can buy a 19-22” LCD monitor for about $100…
> 
> 
> But with what kind of video interface does it have: Is SVGA available or only digital (DVI or HDMI)?
> 
> Hope this helps,
> 
> Barry Baines, WD4ASW
> (Currently in Columbia, SC)
> 
>> 
>> Thank you,
>> Mark
>> WU6R 
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to bbaines at mac.com
> 


More information about the Elecraft mailing list