[Elecraft] KX2 "SWR/RF" display in v2.89

[Steve Sergeant]

This has happened to me often enough that I should have learned to read
my manuals cover-to-cover, which I never do: A feature I had no use for
became inadvertently activated, and sabotaged my normal operating modes.

In this case, it was the CW-in-SSB feature, which apparently deactivates
the RF/SWR meter in SSB mode. It's described on page 45 of the most
recent manual.

--... ...--
SteveSgt, KC6ZKT


On 5/28/18 21:33 PM, Grant Youngman wrote:
> Key the transmitter and then adjust Mic Gain … 
> 
> Grant NQ5T
> K3 #2091, KX3 #8342
> 
>> On May 28, 2018, at 10:19 PM, Steve Sergeant <stevesgt at effable.com
>> <mailto:stevesgt at effable.com>> wrote:
>>
>> Brian:
>>
>> That's the first thing I tried.
>>
>> While in USB/LSB or AM, tapping the KYR-SPOT/MIC knob toggles between
>> "13 WPM" and "MIC 30" on the VFO B display, but does not change the
>> meter to SWR/RF.
>>
>> The next clue is that I do see the SWR/RF meter when in CW mode, but not
>> in USB/LSB nor in AM. When I tap the KYR-SPOT/MIC knob in CW mode, the
>> VFO B display shows "SPOT" and a tone is heard through the speaker.
>