[Elecraft] [KX3] CW Splatter?

[Rick WA6NHC]

It also matters what receiver the other person was using and I'd bet a 
buck that their noise blanker was on. My mobile rig (another brand) is 
notorious for hearing garbage (but lower noise) with NB on (because it 
bypasses a portion of the rx chain).

While it's disconcerting, more information is needed before fretting 
over one report.

You might be able to use a remote SDR radio for your tests, there are 
several online that anyone can access.

Rick nhc


On 5/8/2018 4:34 PM, Don Wilhelm wrote:
> Roger,
>
> OK, that rules out the power supply question.
>
> You did not say which band, or the proximity to your email associate.
>
> There are other weird possibilities.  A corroded connection in his 
> antenna/feedline system or yours which can act as a diode for instance.
> He was close enough for you to overload his receiver.  If he was using 
> some of the SDR receivers, they can overload easily.  What band?  How 
> strong was your signal at his QTH?  Many unanswered questions.
>
> 73,
> Don W3FPR
>
> On 5/8/2018 6:33 PM, Roger Meadows wrote:
>> Thanks Don,
>>
>> I’m on a Pro Audio Engineering supply output is 13.5 key down at full 
>> output.
>>
>> Although not a be all tell all, I was monitoring RBN at the time to 
>> see where I was being heard and it was reporting my frequency correctly.
>>
>> THanks!
>> Roger
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa6nhc at gmail.com