[Elecraft] Tilt Stand for KPA1500?

[Mark E. Musick]

Hi Ted,
The KPA1500 RF deck does have a tilt stand. I can't tell you how high it is because I don't use it.
If you want, I'll be glad to check it for you.

73,
Mark, WB9CIF

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Dauer, Edward
Sent: Saturday, May 12, 2018 8:20 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Tilt Stand for KPA1500?

Getting closer to placing an order for a KPA-1500 -- --  electrician is, at last, coming Monday to see if or how 240 VAC can be brought to the shack.  Meanwhile, in reading the KPA1500 Manual I saw no mention of a tilt stand, and the photos don’t show one.  Is there, or could there be?  Weight should not be a problem.  The KPA1500 RF deck weighs 22 lbs, compared to almost 31 lbs for the KPA500 with a KAT500 on top.  If there is no official tilt stand, could the front feet be propped up on home-made props to have the angle match the neighboring K3 and P3, or would that degree of tilt restrict access for the lower rear panel connectors?  I can’t tell those detailed dimensions from the pictorials . . . .   Any other reason not to do something like that?

Ted, KN1CBR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmusick at sbcglobal.net