[Elecraft] KPA1500 fan noise concern

[Jorge Diez (CX6VM-CW5W)]

That’s will be great! 

Enviado desde mi iPhone

El 29 may. 2018, a la(s) 22:47, <john at kk9a.com> <john at kk9a.com> escribió:

> I was suggesting an optional hardware controller separate from the amp, not
> operating it remotely though a computer. OM Power, Acom and Henry have done
> this with some of their models.
> 
> John KK9A
> 
> Bill Stravinsky k3wjv wrote 
> Tue May 29 14:40:43 EDT 2018
> 
> 
> John
> I would imagine the 1500 will be remotable just as the 500 is.  A friend of
> mine remotes his 500 to the basement just as he did with his Acom 2000aand
> he is investigating remoting the 1500 he just got.  As for a control box I
> don't know.  Not sure if the amp faults will be visible in the vfo B area
> ofthe K3.  It tells you its on-off or in standby.
> BillK3WJV
> 
> 
> 
>    On Monday, May 28, 2018, 9:18:04 PM EDT, john at kk9a.com <john at
> kk9a.com> wrote:  
> 
> I imagine that due to the KPA1500's size it requires a higher volume of air
> than a large amplifier would. Its small size and weight make it appealing.
> The Acom 2000 has a control box that is separate from the amp so you really
> never hear the amp run. I am wondering it something similar can be done with
> the Elecraft KPA1500, perhaps an option like the K-Pod, so that the noise
> source is further from the operating position?
> 
> John KK9A
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jorge at gmail.com