[Elecraft] PX3 Screen Issue

[bill steffey]

joe   did anyone from elecraft get back to your email to them???
or did you call them ???


At 05:55 PM 5/22/2018, Joe Caldwell wrote:
>I assembled my PX3 kit over the weekend and the screen is not displaying
>properly.
>
>It's almost as if the contrast is set way too high (if that's possible).
> From head on almost nothing is visible (it just looks like a white screen),
>but from certain oblique angles you can just make out the spectrum display
>and read the menu entries, etc. I installed the latest firmware and played
>around with the brightness, but there's obviously something wrong. Other
>than the screen the unit appears to be functioning correctly. I was able to
>pull a "screen capture" using the PX3 utility and it tracks my KX3
>frequency as it should.
>
>I was thinking the ribbon connection to the screen needs reseated, but
>maybe it's just a bad display.
>
>Has anyone ever had this issue before? I emailed support a couple days ago
>but haven't gotten a response.
>
>
>Thanks,
>
>Joe, N3XE
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to ny9h at arrl.net