[Elecraft] Keep getting BAT Err message

[Don Wilhelm]

Bob,

Read the BAT ERR description on page 4 of the KXBC3 manual.

You may have to remove the batteries and check the terminal voltage of 
each one with your DMM to determine if you have a bad one, or if all are 
possibly fully charged.

Reloading software will not make any difference, but likely will not 
hurt anything either.

73,
Don W3FPR

On 5/31/2018 4:51 PM, Bob G3PJT wrote:
> When I try to charge the battery I get Bat err message and charging is
> terminated. I have reloaded s/ware etc but no change.