[Elecraft] FS: XV144 and XV432 transverters.

[Don Wilhelm]

Kevin,

Yes, the transverters can be used with the KX3.  You will have to bring 
out the Key Out signal from ACC2 (ring contact of the jack).
You will need to set up the transverters for a non-Elecraft Transceiver 
because there is no transverter select information from the AUXBUS 
available as there is in the K2 and K3/K3S.

There are up to 9 transverter bands that can be addressed by the KX3, so 
you can display the output frequency of the transverter.

73,
Don W3FPR

On 5/2/2018 11:44 AM, Kevin der Kinderen wrote:
> Hi Jim... do you know if these can be used with the KX3? If so... I'm very
> interested and can arrange for a PayPal payment immediately.
> 
> 73,
> Kev K4VD
> 
> On Wed, May 2, 2018 at 10:04 AM Jim Rogers <jim.w4atk at gmail.com> wrote:
> 
>> Both in like new condition. Both have high stability Xtals and ovens.
>>
>> Original cost: $479.95 each plus $60 each for the crystals and ovens.
>>
>> Buy one get one free. Your price $550 shipped CONUS.
>>
>> Payment by PayPal only to jim.w4atk at gmail.com
>>
>> Jim, W4ATK
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kkinderen at gmail.com
>>
> 
>