2003-July Archives by Author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Jul 1 02:02:58 2003
Ending: Thu Jul 31 21:21:54 2003
Messages: 437

• [R-390] Ostermans' book   Kammer George D Contr SMC DET 11 /MCL
• [R-390] INFO RF-DECK REMOVEL   =?iso-8859-1?q?DLBMRA/Gianfranco?=
• [R-390] New 390A owner & fan   AI2Q
• [R-390] DIY cabinet/shielding questions   [email protected]
• [R-390] Re: DIY cabinet/shielding questions   [email protected]
• [R-390] Yet another R-390A rises from the dead... (long)   [email protected]
• [R-390] Crystal calibrator issues on some bands   [email protected]
• [R-390] Re: Crystal calibrator issues on some bands   [email protected]
• [R-390] Oldham Coupler Spring   Bernice & Al
• [R-390] COSMOS PTO, starting over again.   Paul H. Anderson
• [R-390] Need Info on antenna Coupler   Paul H. Anderson
• [R-390] Dallas Lankford SSB Mod(AGC) Vs. Carr Level Mtr   Tony Angerame
• [R-390] RE: R-390-A Engraved Panels   Dan Arney
• [R-390] SSB-Modified R-390A   Dan Arney
• [R-390] R-390 (R-392 parts)   Dan Arney
• [R-390] FW: [ndblist] WLO NMC KFS KPH KLB freqs today   Phil Atchley
• [R-390] Clean gear train   Phil Atchley
• [R-390] Swap Collins Tag for '67 EAC Tag (It's a vanity thing 8^)   Phil Atchley
• [R-390] Is it REALLY worth this much?   Phil Atchley
• [R-390] Is it REALLY worth this much?   Phil Atchley
• [R-390] FS: Hammarlund HC-10 Sideband adapter.   Phil Atchley
• [R-390] FS: URM-90 LCR Bridge.   Phil Atchley
• [R-390] Them sneaky resistors   Phil Atchley
• [R-390] Replacement pto arrived.   Phil Atchley
• [R-390] test   Phil Atchley
• [R-390] PTO SUCCESS!!   Phil Atchley
• [R-390] What size screws??   Phil Atchley
• [R-390] Screws, thank you all.   Phil Atchley
• [R-390] Error in Power supply Mod page.   Phil Atchley
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Phil Atchley
• [R-390] 3rd Mixer NOISE in R-390A.   Phil Atchley
• [R-390] 3rd Mixer noise, STINKIN' COSMOS PTO 8^)   Phil Atchley
• [R-390] Found some nice Rack Screws locally   Phil Atchley
• [R-390] COSMOS PTO, starting over again.   Phil Atchley
• [R-390] Cosmos, I broke it 8^((   Phil Atchley
• [R-390] Setting end points on Cosmos PTO   Phil Atchley
• [R-390] Cosmos PTO, FINAL Chapter!   Phil Atchley
• [R-390] 3rd Mixer noise, STINKIN' COSMOS PTO 8^)   Phil Atchley
• [R-390] RE: [R-390]PTO Insulation (was) COSMOS PTO, starting over again.   Phil Atchley
• [R-390] My 'new' '67 EAC is now "on line" 8^) Ballast Tube question.   Phil Atchley
• [R-390] Heard on my "new" R-390A receiver.   Phil Atchley
• [R-390] My 'new' '67 EAC is now "on line" 8^) Ballast Tube question.   Phil Atchley
• [R-390] My 'new' '67 EAC is now "on line" 8^) Ballast Tube question.   Phil Atchley
• [R-390] =?iso-8859-1?Q?RE:_=5BR-390=5D_My_'new'_'67_EAC_is_now_=22on_line=22_8^?= =?iso-8859-1?Q?=29=A0_Ballast_Tube_question.?=   Phil Atchley
• [R-390] Oldham Coupler Spring   Phil Atchley
• [R-390] A couple good R-390a loggings including Tibet.   Phil Atchley
• [R-390] Brownells GunKote for knobs   Phil Atchley
• [R-390] Did the LF Mod today. . .   Phil Atchley
• [R-390] Did the LF Mod today. . .   Phil Atchley
• [R-390] Today I Tweaked my PTO endpoint and lubed gear train.   Phil Atchley
• [R-390] Today I Tweaked my PTO endpoint and lubed gear train.   Phil Atchley
• [R-390] RBETHMAN (?) please contact me.   Phil Atchley
• [R-390] I.F. SubChassis carbon resistors.   Phil Atchley
• [R-390] Some "goodies" heard on my '67 EAC.   Phil Atchley
• [R-390] S-Meter?   Phil Atchley
• [R-390] Clean gear train   Spence Barton
• [R-390] Brownells GunKote for knobs   Spence Barton
• [R-390] Rack Wanted   Scott Bauer
• [R-390] Can someone help with an ols R388?   Scott Bauer
• [R-390] wtb RF deck cover for R390   Scott Bauer
• [R-390] Blasphemy!   Gene Beckwith
• [R-390] DIY cabinet/shielding questions   Gene Beckwith
• [R-390] What size screws??   Gene Beckwith
• [R-390] CL80....   Gene Beckwith
• [R-390] What size screws??   Gene Beckwith
• [R-390] DIY cabinet/shielding questions   Richard Biddle
• [R-390] Brownells GunKote for knobs   Richard Biddle
• [R-390] Brownells GunKote for knobs   Richard Biddle
• [R-390] Variacs   Richard Biddle
• [R-390] Variacs and Line Measurement   Richard Biddle
• [R-390] if deck troublesI I think   James Bischof
• [R-390] agc problem +   James Bischof
• [R-390] crystal pack adjustment   James Bischof
• [R-390] crystal pack   James Bischof
• [R-390] limiter pot   James Bischof
• [R-390] DIY cabinet/shielding questions   Jim Brannigan
• [R-390] Alternative to Rack Screws...   Jim Brannigan
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Jim Brannigan
• [R-390] 3rd Mixer NOISE in R-390A.   Jim Brannigan
• [R-390] KPH broadcasts   Jim Brannigan
• [R-390] SSB Conversion Scheme   Jim Brannigan
• [R-390] Variacs & original spec...   Jim Brannigan
• [R-390] Variacs & original spec...   Jim Brannigan
• [R-390] SSB-Modified R-390A - factory or not ?   Rodney Bunt
• [R-390] 70v line transformers sale   Buzz
• [R-390] Increase output power of your R-390's   Buzz
• [R-390] Name plates   Dave Campbell
• [R-390] Audio Equalizer Info   Chuck
• [R-390] Vacuum tube question   Kenneth Crips
• [R-390] R-390A SSB adapter   [email protected]
• [R-390] R-390A SSB adapter   [email protected]
• [R-390] Synchronous AM Detector Kit   Sheldon Daitch
• [R-390] Query re. 70v line xformer   Dave Kamp, KW0D
• [R-390] Query re. 70v line xformer   Dave Kamp, KW0D
• [R-390] Proper Muting   Dave Kamp, KW0D
• [R-390] Variacs   Dave Kamp, KW0D
• [R-390] Variacs & original spec...   Dave Kamp, KW0D
• [R-390] Was variacs, now bucking transformers...   Dave Kamp, KW0D
• [R-390] Crystal calibrator issues on some bands   Dave Kamp, KW0D
• [R-390] SSB-Modified R-390A   Jim DiMauro
• [R-390] SSB-Modified R-390A   Jim DiMauro
• [R-390] SSB Conversion Photos   Jim DiMauro
• [R-390] SSB Conversion Photos   Jim DiMauro
• [R-390] SSB Conversion Photos   Jim DiMauro
• [R-390] limiter pot   Ed
• Fw: [R-390] Rush Warning   Dave Faria
• [R-390] DIY cabinet/shielding questions   Joe Foley
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Joe Foley
• [R-390] KPH, KFS and WLO   Joe Foley
• [R-390] My 'new' '67 EAC is now "on line" 8^) Ballast Tube question.   Joe Foley
• [R-390] Proper Muting   Joe Foley
• [R-390] Brownells GunKote for knobs   Joe Foley
• [R-390] Ballast tube   Joe Foley
• [R-390] limiter pot   Glen Galati
• [R-390] Rush Warning   Gary H. Harmon, Jr.
• [R-390] Blasphemy!   Robert Goff
• [R-390] Sound powered headphones?   Robert Goff
• [R-390] equal opportunity boatanchors   Robert Goff
• [R-390] equal opportunities gone   Robert Goff
• [R-390] Wanted to buy CY-979A military receiver cabinet   Marvin Gorden
• [R-390] R-390 - SP 600   Kenneth G. Gordon
• [R-390] 3TF7 and other ballast tubes...   Kenneth G. Gordon
• [R-390] Variacs...and line voltage...   Kenneth G. Gordon
• [R-390] Sound powered headphones?   Kenneth G. Gordon
• [R-390] Bucking transformer...   Kenneth G. Gordon
• [R-390] Filters for 51j4   Joachim Groeger
• [R-390] Dittmore- Freimuth 390-A - Information wanted   Joachim Groeger
• [R-390] Blasphemy!   Barry Hauser
• [R-390] Blasphemy!   Barry Hauser
• [R-390] New 390A owner & fan   Barry Hauser
• [R-390] DIY cabinet/shielding questions   Barry Hauser
• [R-390] Re: help needed   Barry Hauser
• [R-390] What size screws??   Barry Hauser
• [R-390] Name plates   Barry Hauser
• [R-390] Rush Warning   Barry Hauser
• [R-390] SSB-Modified R-390A   Barry Hauser
• [R-390] 3rd Mixer noise, STINKIN' COSMOS PTO 8^)   Barry Hauser
• [R-390] My 'new' '67 EAC is now "on line" 8^) Ballast Tube question.   Barry Hauser
• [R-390] Heard on my "new" R-390A receiver.   Barry Hauser
• [R-390] My 'new' '67 EAC is now "on line" 8^) Ballast Tube question.   Barry Hauser
• [R-390] =?iso-8859-1?Q?Re:_=5BR-390=5D_RE:_=5BR-390=5D_My_'new'_'67_EAC_is_now_?= =?iso-8859-1?Q?=22on_line=22_8^=29=A0_Ballast_Tube_question.?=   Barry Hauser
• [R-390] Brownells GunKote for knobs   Barry Hauser
• [R-390] Variacs   Barry Hauser
• [R-390] Synchronous AM Detector Kit   Barry Hauser
• [R-390] Today I Tweaked my PTO endpoint and lubed gear train.   Barry Hauser
• [R-390] Re: Blasphemy   Gord Hayward
• [R-390] CL-80   Gord Hayward
• [R-390] Then try Mike Savage, but to do it RIGHT try AM 740 > from Toronto, CA. What a station - two 50KW transmitters multicoupled onto the same vertical stick. Here's some station pics. Any 390 anywhere should hear this station. It was better when it was a CBC station. AM 740 (was Rush whoever)   Gord Hayward
• [R-390] Re: Crystal Oscillator Coil Adjustment   Gord Hayward
• [R-390] Re: Variacs   Gord Hayward
• [R-390] Re: R390A S-meters   Gord Hayward
• [R-390] Oldham Coupler Spring   Steve Hobensack
• [R-390] Rush Warning   JM/CO
• [R-390] New 390A owner & fan   Andy Jackson
• [R-390] New 390A owner & fan   Andy Jackson
• [R-390] R-390 (R-392 parts)   [email protected]
• [R-390] R390-A For Sale - make reasonable offer.   Darryl Jones
• [R-390] WTB: CY-979   K3PID
• [R-390] Setting end points on Cosmos PTO   [email protected]
• [R-390] SSB Conversion Photos   John KA1XC
• [R-390] Synchronous AM Detector Kit   John KA1XC
• [R-390] Crystal calibrator issues on some bands   John KA1XC
• [R-390] CL80....   Jerry Kincade
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Jerry Kincade
• [R-390] Brownells GunKote for knobs   Jerry Kincade
• [R-390] Brownells GunKote for knobs   Jerry Kincade
• [R-390] New 390A owner & fan   John Kolb
• [R-390] Heard on my "new" R-390A receiver.   John Kolb
• [R-390] Sylvania R-1451A/WLR-6 Waterboy Receiver   John Kolb
• [R-390] AC Line Monitoring Musings   John Kolb
• [R-390] New 390A owner & fan   [email protected]
• [R-390] What size screws??   [email protected]
• [R-390] SSB-Modified R-390A   [email protected]
• [R-390] Rush Warning   [email protected]
• [R-390] 70v line transformers sale   [email protected]
• [R-390] SSB-Modified R-390A   [email protected]
• [R-390] Dittmore- Freimuth 390-A - Information wanted   [email protected]
• [R-390] (no subject)   [email protected]
• [R-390] KPH, KFS and WLO   [email protected]
• [R-390] Query re. 70v line xformer   [email protected]
• [R-390] Tube Class 101 for 3TF7 substitutions   [email protected]
• [R-390] Variac   [email protected]
• [R-390] SSB Conversion Photos   [email protected]
• [R-390] Variacs   [email protected]
• [R-390] Variacs & original spec...   [email protected]
• [R-390] Variacs & original spec...   [email protected]
• [R-390] Was variacs, now bucking transformers...   [email protected]
• [R-390] 8-36 stainless-steel hex-socket setscrews used in the R-390A Knobs   [email protected]
• [R-390] Ostermans' book   [email protected]
• [R-390] Apology   [email protected]
• [R-390] Synchronous AM Detector Kit   [email protected]
• [R-390] Synchronous AM Detector Kit   [email protected]
• [R-390] Is it REALLY worth this much?   Tom M.
• [R-390] Oldham Coupler Spring   Tom M.
• [R-390] Synchronous AM Detector Kit   Tom M.
• [R-390] R390A AFGain Pot Repair   Dave and Sharon Maples
• [R-390] R-390(A or non A) entertainment   Dave and Sharon Maples
• [R-390] DIY cabinet/shielding questions   Dave and Sharon Maples
• [R-390] (no subject)   Dave and Sharon Maples
• [R-390] the press, etc.   Dave and Sharon Maples
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Dave and Sharon Maples
• [R-390] R390A Crystal Osc subchassis   RJ Mattson
• [R-390] I.F. SubChassis carbon resistors.   RJ Mattson
• [R-390] Need Info on antenna Coupler   Craig McCartney
• [R-390] F/S SW R-390A   David Medley
• [R-390] R-390A filter needed   Merle
• [R-390] Collins PTO Identification Guide   Merle
• [R-390] SSB   Merle
• [R-390] Blasphemy!   Dave Merrill
• [R-390] Blasphemy!   Dave Merrill
• [R-390] 3TF7 vs 3TF4   Dave Merrill
• [R-390] R-390 (R-392 parts)   Dave Merrill
• [R-390] Sound powered headphones?   Dan Merz
• [R-390] Alternative to Rack Screws...   Michael Melland, W9WIS
• [R-390] 3rd Mixer NOISE in R-390A.   Jim Miller
• [R-390] COSMOS PTO, starting over again.   Jim Miller
• [R-390] PTO Test Jig   Jim Miller
• [R-390] COSMOS PTO, starting over again.   Jim Miller
• [R-390] PTO Test Jig   Jim Miller
• [R-390] R390A Crystal Osc subchassis   Jim Miller
• [R-390] Synchronous AM Detector Kit   James A. (Andy) Moorer
• [R-390] A question of covers.   Roy Morgan
• [R-390] Is it REALLY worth this much?   Roy Morgan
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Roy Morgan
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Roy Morgan
• [R-390] R-390 (R-392 parts)   Roy Morgan
• [R-390] Proper Muting   Roy Morgan
• [R-390] C551   Forrest Myers
• [R-390] C551   Forrest Myers
• [R-390] C551   Forrest Myers
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Forrest Myers
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Forrest Myers
• [R-390] Name plates   Forrest Myers
• [R-390] New 390A owner & fan   Forrest Myers
• [R-390] KPH, KFS and WLO   Forrest Myers
• [R-390] Ballast tube   Forrest Myers
• [R-390] NO WORKIE - was, I broke it!   Laird Tom N
• [R-390] Variacs & original spec...   Todd Bigelow - PS
• [R-390] Need Info on antenna Coupler   Todd Bigelow - PS
• [R-390] bottom 200 kc dead   Todd Bigelow - PS
• [R-390] Help needed   John Page
• [R-390] Re: help needed   John Page
• [R-390] Re: help needed   John Page
• [R-390] Low audio   John Page
• [R-390] Low audio   John Page
• [R-390] bottom 200 kc dead   John Page
• [R-390] bottom 200 kc dead   John Page
• [R-390] New 390A owner & fan   Drew Papanek
• [R-390] Bright BallasTube   Drew Papanek
• [R-390] Re: BallasTube Question   Drew Papanek
• [R-390] Re: BallasTube Question   Drew Papanek
• [R-390] AC Line Monitoring Musings   Drew Papanek
• [R-390] Was variacs, now bucking transformers...   Drew Papanek
• [R-390] RE: Was variacs, now bucking transformers...   Drew Papanek
• [R-390] Bottom 200Kc Dead   Drew Papanek
• [R-390] looking for 51J4 original filter 4 or 6 KC   Matt Parkinson
• [R-390] Imperial R-390A for sale   [email protected]
• [R-390] Imperial R-390A is sold!   [email protected]
• [R-390] Synchronous AM Detector Kit   Joe Reda
• [R-390] (no subject)   Mark Richards
• [R-390] What size screws??   Bill Riches
• [R-390] (no subject)   Joel Richey
• [R-390] Blasphemy!   Bryce Ringwood
• [R-390] Re: [R-390]--Blasphemy Indeed?   Bryce Ringwood
• [R-390] Re: help needed   Bryce Ringwood
• [R-390] SSB-Modified R-390A   David Ross
• [R-390] Blasphemy!   Scott, Barry (Clyde B)
• [R-390] R390A AFGain Pot Repair   Scott, Barry (Clyde B)
• [R-390] R390A AFGain Pot Repair   Scott, Barry (Clyde B)
• [R-390] Blasphemy!   Scott, Barry (Clyde B)
• [R-390] What size screws??   Scott, Barry (Clyde B)
• [R-390] NO WORKIE - was, I broke it!   Scott, Barry (Clyde B)
• [R-390] 8-36 stainless-steel hex-socket setscrews used in the R-390A Knobs   Scott, Barry (Clyde B)
• [R-390] 8-36 stainless-steel hex-socket setscrews used in the R-390A Knobs   Scott, Barry (Clyde B)
• [R-390] Variacs   Scott, Barry (Clyde B)
• [R-390] limiter pot   Scott, Barry (Clyde B)
• [R-390] Variacs & original spec...   Scott, Barry (Clyde B)
• [R-390] Bucking transformer...   Scott, Barry (Clyde B)
• [R-390] Synchronous AM Detector Kit   Scott, Barry (Clyde B)
• [R-390] S-Meter?   Scott, Barry (Clyde B)
• [R-390] Is it REALLY worth this much?   Scott Seickel
• [R-390] Re: (R-390) PTO Test jigs   Lionel Sharp
• [R-390] Need Info on antenna Coupler   William Sheehy
• [R-390] New 390A owner & fan   Jim Shorney
• [R-390] Them sneaky resistors   Bill Smith
• [R-390] PTO SUCCESS!!   Bill Smith
• [R-390] limiter pot   Bill Smith
• [R-390] Did the LF Mod today. . .   Bill Smith
• [R-390] Some "goodies" heard on my '67 EAC.   Bill Smith
• [R-390] Oldham Coupler Spring   James Smith
• [R-390] Oldham Coupler Springs   James Smith
• [R-390] 3TF7 and other ballast tubes...   Bryan Stephens
• [R-390] Dittmore- Freimuth 390-A - Information wanted   Ed Tanton
• [R-390] Brownells GunKote for knobs   Ed Tanton
• [R-390] Variacs   Ed Tanton
• [R-390] Query re. 70v line xformer   [email protected]
• [R-390] 8-36 stainless-steel hex-socket setscrews used in the R-390A Knobs   [email protected]
• [R-390] 8-36 stainless-steel hex-socket setscrews used in the R-390A Knobs   [email protected]
• [R-390] bottom 200 kc dead   [email protected]
• [R-390] COSMOS PTO, starting over again.   Bob Tetrault
• [R-390] My 'new' '67 EAC is now "on line" 8^) Ballast Tube question.   Bob Tetrault
• [R-390] PTO Test Jig   Al Tirevold
• [R-390] NO WORKIE - was, I broke it!   [email protected]
• [R-390] Blasphemy!   [email protected]
• [R-390] Sylvania R-1451A/WLR-6 Waterboy Receiver   [email protected]
• [R-390] COSMOS PTO, starting over again.   [email protected]
• [R-390] COSMOS PTO, starting over again.   [email protected]
• [R-390] COSMOS PTO, starting over again.   [email protected]
• [R-390] 8-36 stainless-steel hex-socket setscrews used in the R-390A Knobs   [email protected]
• [R-390] 8-36 stainless-steel hex-socket setscrews used in the R-390A Knobs   [email protected]
• [R-390] Synchronous AM Detector Kit   [email protected]
• [R-390] 8-36 stainless-steel hex-socket setscrews used in the R-390A Knobs   [email protected]
• [R-390] Synchronous AM Detector Kit   [email protected]
• [R-390] Variacs   Veenstra, Lester
• [R-390] Variacs   Veenstra, Lester
• [R-390] R-390A SSB adapter   Veenstra, Lester
• [R-390] R390, R390A, R392 VFO Question   Don Reaves W5OR
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Don Reaves W5OR
• [R-390] KPH broadcasts   Don Reaves W5OR
• [R-390] Raging Rush thread   Don Reaves W5OR
• [R-390] 3rd Mixer noise, STINKIN' COSMOS PTO 8^)   Don Reaves W5OR
• [R-390] KPH, KFS and WLO   Don Reaves W5OR
• [R-390] KPH, KFS and WLO   Don Reaves W5OR
• [R-390] Query re. 70v line xformer   Don Reaves W5OR
• [R-390] Can someone help with an ols R388?   Don Reaves W5OR
• [R-390] limiter pot   Glenn Little WB4UIV
• [R-390] Crystal calibrator issues on some bands   Glenn Little WB4UIV
• [R-390] SSB-Modified R-390A   Dennis L. Wade
• [R-390] SSB-Modified R-390A   Dennis L. Wade
• [R-390] SSB-Modified R-390A   Dennis L. Wade
• [R-390] SSB Conversion Photos   Dennis L. Wade
• [R-390] Synchronous AM Detector Kit   Dennis L. Wade
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   James M. Walker
• [R-390] C551   Walter Wilson
• [R-390] Re: BallasTube Question   David Wise
• [R-390] Re: BallasTube Question   David Wise
• [R-390] Synchronous AM Detector Kit   David Wise
• [R-390] Synchronous AM Detector Kit   David Wise
• [R-390] Was variacs, now bucking transformers...   David Wise
• [R-390] Synchronous AM Detector Kit   David Wise
• [R-390] bottom 200 kc dead   David Wise
• [R-390] test   Peter Worrall
• [R-390] Blasphemy!   Ed Zeranski
• [R-390] Blasphemy!   Ed Zeranski
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   Ed Zeranski
• [R-390] Help finding contact info.   Artur Zygmunt
• [R-390] Blasphemy!   [email protected]
• [R-390] 8-36 stainless-steel hex-socket setscrews used in the R-390A Knobs   [email protected]
• [R-390] Re: help needed   blw
• [R-390] CL80....   blw
• [R-390] CL80....   blw
• [R-390] OA2 and Freq. Readout   blw
• [R-390] OA2 and Freq. Readout   blw
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   blw
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   blw
• [R-390] Rush Warning   blw
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   blw
• [R-390] (no subject)   blw
• [R-390] Heard on my "new" R-390A receiver.   blw
• [R-390] Heard on my "new" R-390A receiver.   blw
• [R-390] Brownells GunKote for knobs   blw
• [R-390] Variacs & original spec...   blw
• [R-390] Variacs   blw
• [R-390] Variacs   blw
• [R-390] Variacs & original spec...   blw
• [R-390] Ostermans' book   blw
• [R-390] Did the LF Mod today. . .   blw
• [R-390] ???????   blw
• [R-390] Audio Equalizer Info   blw
• [R-390] Synchronous AM Detector Kit   blw
• [R-390] Some "goodies" heard on my '67 EAC.   blw
• [R-390] Re: 70v line transformers sale   [email protected]
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   [email protected]
• [R-390] Ballast tube   ronald j deeter
• [R-390] SSB-Modified R-390A   federico
• [R-390] SSB-Modified R-390A   federico
• [R-390] SSB Conversion Photos   federico
• [R-390] SSB   federico
• [R-390] SSB Conversion Scheme   federico
• [R-390] bottom 200 kc dead   g4gjl
• [R-390] R390A test rig   guido
• [R-390] Is it REALLY worth this much?   hankkarn
• [R-390] DIY cabinet/shielding questions   hankkarn
• [R-390] RE: Engraved Panels & Mr. Murphy   hankkarn
• [R-390] RE: ENGRAVED R-390A panels   hankkarn
• [R-390] Re: [R-390]--Blasphemy Indeed?   [email protected]
• [R-390] Re: Blasphemy Indeed..   [email protected]
• [R-390] CL80....   [email protected]
• [R-390] CL80....   [email protected]
• [R-390] OA2 and Freq. Readout   [email protected]
• [R-390] Freq. Readout   [email protected]
• [R-390] Rack Mount, and GREAT POSTINGS..   [email protected]
• [R-390] SSB-modified R390A   [email protected]
• [R-390] Teleregister Receiver Level Monitor   [email protected]
• [R-390] R-390 - SP 600   [email protected]
• [R-390] My SP 600   [email protected]
• [R-390] Variac   [email protected]
• [R-390] Variacs   [email protected]
• [R-390] Variacs   [email protected]
• [R-390] Variacs   [email protected]
• [R-390] Variacs   [email protected]
• [R-390] Variacs and Line Measurement   [email protected]
• [R-390] Ostermans' book   [email protected]
• [R-390] Sync AM and testing specs   [email protected]
• [R-390] ???????   [email protected]
• [R-390] Apology   [email protected]
• [R-390] SSB on the 390 series   [email protected]
• [R-390] SSB on the R-390 series   [email protected]
• [R-390] 3898 dot five on 75M   [email protected]
• [R-390] Gain Problem   [email protected]
• [R-390] Re: Them sneaky resistors   [email protected]
• [R-390] Re: Rush Limbaugh sure sounds good on '67 EAC ;-)   [email protected]
• [R-390] 70v line transformers sale   [email protected]
• [R-390] Re: 70v line transformers sale   [email protected]
• [R-390] Re: Re: 70v line transformers sale   [email protected]
• [R-390] DIY cabinet/shielding questions   mikea
• [R-390] What size screws??   mikea
• [R-390] What size screws??   mikea
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   mikea
• [R-390] Rush Limbaugh sure sounds good on '67 EAC ;-)   mikea
• [R-390] Oldham Coupler Spring   mikea
• [R-390] Synchronous AM Detector Kit   mikea
• [R-390] SSB-Modified R-390A   rbethman
• [R-390] 3rd Mixer noise, STINKIN' COSMOS PTO 8^)   rbethman
• [R-390] My 'new' '67 EAC is now "on line" 8^) Ballast Tube question.   rbethman
• [R-390] My 'new' '67 EAC is now "on line" 8^) Ballast Tube question.   rbethman
• [R-390] Brownells GunKote for knobs   rbethman
• [R-390] SSB Conversion Photos   rbethman
• [R-390] Variacs   rbethman
• [R-390] Variacs   rbethman
• [R-390] Proper Muting   rbethman
• [R-390] Brownells GunKote for knobs - Brownells RESPONSE   rbethman
• [R-390] Variacs   rbethman
• [R-390] Variacs   rbethman
• [R-390] Audio Equalizer Info   rbethman
• [R-390] R390, R390A, R392 VFO Question   [email protected]
• [R-390] Need Info on antenna Coupler   [email protected]

Last message date: Thu Jul 31 21:21:54 2003
Archived on: Thu Jul 31 16:28:01 2003

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...