[R-390] Brownells GunKote for knobs

[Richard Biddle]

For panels I was thinking about this puppy =96 check out the color =
choices.  A
gray parkerized or stainless steel front panel just seems kind of =
appealing
:)

BROWNELLS AEROSOL BAKING LACQUER

Brownells Aerosol Baking Lacquer is an epoxy-enhanced, oven-cured finish
that's sprayed directly on clean, degreased metal with no priming =
required.
Let dry for 10 minutes then bake in a oven for 30-40 minutes at =
300-350=B0 F.
You'll get a flexible, uniform, professional coating that offers =
exceptional
resistance to salt sprays, plus Brownells Aerosol Baking Lacquer is
impervious to corrosion, water, sweat, solvents, chemicals, trichlor and
bore cleaners. Highly resistant to nicks, scratches, abrasions and wear
marks.

Brownells exclusive, self-leveling, run-resistant formula and circular =
spray
nozzle make blending original and successive coats fast, easy and almost
mistake-proof. Touch-up coats can be sanded with wet-or-dry abrasive,
re-sprayed and re-heated without damage to the original application. =
Spray
right over degreased bluing, plating, zinc or manganese phosphate and =
other
military coatings for increased resistance to rust and moisture.

Can be applied to any properly prepared, metal surface that can =
withstand
temperatures as high as 350=B0 F. without melting or warping. Black is
available in two gloss levels, Matte Black and Gloss Black; O.D. Green =
and
Earth Brown produce a matte, non-reflective finish that can be combined =
with
Matte Black to produce camouflage patterns on firearms. Matte Clear =
provides
an easy application of French Gray Finishes. Parkerizing Gray is a dark,
matte gray that closely matches Brownells Parkerizing for easy =
restoration
of military firearms and accessories. Dark Parkerizing Gray is a darker =
gray
to match parkerized guns that show years of age, use and oil. Stainless
Steel Gray is a light, metallic-silver gray that approximates the look =
of
bead-blasted stainless steel.

SPECS: Aerosol, 6 oz. (170 g) wt. Circular spray. Remove cured coating =
by
bead blasting, abrasive blasting or sanding.

73 de Richard W5SRB