[R-390] Brownells GunKote for knobs - Brownells RESPONSE

[rbethman]

Here is the response directly from the Brownells Tech Support Staff:

Dear Sir,

We certainly do appreciate your interest in Brownells.

Gun Kote should work on any material that will withstand 300-350 degrees
Fahrenheit for up to an hour, and that can be aluminum oxide abrasive
blasted to prepare the surface.  "Pot metal" or zinc alloys, may not
hold up to this temperature range.  You may want to take a look at our
air-cured epoxy finish, Aluma-Hyde II.

David Kaiser
BROWNELLS, INC(r)
Technical Services

Bob Bethman - N0DGN

+-------------------------------+----------------------------------+
| N0DGN AMRadio Manassas, VA    |          Home Builder            |   
+-------------------------------+----------------------------------+
| Bob Bethman                \\\|///     " The absence of a danger |
| rbethman@comcast.net      \\ ~ ~ //      signal does *NOT* mean  |
|                           (/ @ @ /)      that everything is OK " |
+-------------------------oOOo-(_)-oOOo----------------------------+
|                                                                  |
|        2 BC-610s w/BC-614s, 2 R-390As - 1 Collins 1 Eac          |
|         Heathkit DX-60, Apache, Mohawk, SX-101, HT-32A           |
+------------------------------------------------------------------+
|   Opinions expressed are that of my own and do not necessarily   |
|         coincide with or represent those of ANYONE else          |
+------------------------------------------------------------------+
   ALL E-mail received and sent scanned by AVG Anti-Virus software