November 2021 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Nov 1 01:42:40 EDT 2021
Ending: Tue Nov 30 20:50:10 EST 2021
Messages: 392

• [Elecraft] Elecraft CW Net Errata sheet   kevin
  • [Elecraft] KX3 in multi radio environment   Ken K6MR
    • [Elecraft] KX3 in multi radio environment   Greg Mitchell
    • [Elecraft] KX3 in multi radio environment   George Thornton
      • [Elecraft] KX3 in multi radio environment   Igor Sokolov
• [Elecraft] KUSB cable for sale   Carl Yaffey
• [Elecraft] loss of receive audio on K3   Douglas Zwiebel
  • [Elecraft] loss of receive audio on K3   Victor Rosenthal 4X6GP
• [Elecraft] K2 ReWork Eliminator set for Sale   John G3PQA
• [Elecraft] center fed dipole   Lyn Norstad
  • [Elecraft] center fed dipole   Wes
    • [Elecraft] center fed dipole   Lyn Norstad
• [Elecraft] KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and KPA1500   Keith Ennis
  • [Elecraft] KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and KPA1500   Julia Tuttle
• [Elecraft] 80M Elecraft SSB Net 10/30/2021 ET/11/1/2021 UTC   Dave New
• [Elecraft] PX3 #2867 for sale   richard gilley
• [Elecraft] 40 meter SSB net and time change   Steve Hall
• [Elecraft] Subject: KX3 in multi radio environment   Steve Hall
  • [Elecraft] Subject: KX3 in multi radio environment   Ken K6MR
• [Elecraft] Notable SSB QSO (HD8R)   Wayne Burdick
  • [Elecraft] Notable SSB QSO (HD8R)   Bill Lederer
    • [Elecraft] Notable SSB QSO (HD8R)   Tim Tucker
      • [Elecraft] Notable SSB QSO (HD8R)   Wes
      • [Elecraft] Notable SSB QSO (HD8R)   Ted Edwards W3TB
      • [Elecraft] Notable SSB QSO (HD8R)   Dave Sublette
• [Elecraft] Problem Tuning K3   bw396ss at yahoo.com
  • [Elecraft] Problem Tuning K3-" Balun"   Ray
    • [Elecraft] Problem Tuning K3-" Balun"   Joe Moffatt
    • [Elecraft] Problem Tuning K3-" Balun"   David Gilbert
  • [Elecraft] Problem Tuning K3   Jim Brown
    • [Elecraft] Problem Tuning K3   CUTTER DAVID
    • [Elecraft] Problem Tuning K3   CUTTER DAVID
      • [Elecraft] Problem Tuning K3   Jim Brown
      • [Elecraft] Problem Tuning K3   CUTTER DAVID
      • [Elecraft] Problem Tuning K3   Dan Presley
      • [Elecraft] Problem Tuning K3: now off centre fed dipole   CUTTER DAVID
      • [Elecraft] Problem Tuning K3: now off centre fed dipole   Charles K0MV
      • [Elecraft] Problem Tuning K3: now off centre fed dipole   CUTTER DAVID
      • [Elecraft] Problem Tuning K3: now off centre fed dipole   Ray
      • [Elecraft] Problem Tuning K3: now off centre fed dipole   Jim Brown
      • [Elecraft] Problem Tuning K3: now off centre fed dipole   Eric Swartz
      • [Elecraft] Problem Tuning K3   Ray
• [Elecraft] Need Mic adapter: Icom SM-50 to K3 mic input jack   Bob KD7YZ
  • [Elecraft] Need Mic adapter: Icom SM-50 to K3 mic input jack   Ken Winterling
    • [Elecraft] Need Mic adapter: Icom SM-50 to K3 mic input jack   Don Wilhelm
• [Elecraft] Rf Choke placement   JAMES GUNNOE
  • [Elecraft] Rf Choke placement   Don Wilhelm
    • [Elecraft] Rf Choke placement   Rick NK7I
• [Elecraft] Need Mic adapter: Icom SM-50 to K3 mic input jack   john at kk9a.com
  • [Elecraft] Need Mic adapter: Icom SM-50 to K3 mic input jack   Raymond Sills
• [Elecraft] Need Mic adapter: Icom SM-50 to K3 mic input jack   Gary Peterson
  • [Elecraft] Need Mic adapter: Icom SM-50 to K3 mic input jack   Don Wilhelm
    • [Elecraft] Need Mic adapter: Icom SM-50 to K3 mic input jack   Pete Smith N4ZR
• [Elecraft] WTB - KAT3 or KAT3A   David Lee / Seatools
• [Elecraft] [K3} [K3s] Final round of module orders?   Michael Carter
  • [Elecraft] [K3} [K3s] Final round of module orders?   chetsubaccount at snet.net
  • [Elecraft] [K3} [K3s] Final round of module orders?   n6lrv at outlook.com
• [Elecraft] K3 - HI RFI alarm   Nick Kennedy
  • [Elecraft] K3 - HI RFI alarm   Fred
• [Elecraft] Problem Tuning K3   JR
  • [Elecraft] Problem Tuning K3   Jim Brown
    • [Elecraft] Problem Tuning K3   Wes
  • [Elecraft] Problem Tuning K3   Bill Lederer
    • [Elecraft] Problem Tuning K3   Jim Brown
    • [Elecraft] Problem Tuning K3   Edward Mccann
    • [Elecraft] Problem Tuning K3   JR
• [Elecraft] [K3} [K3s] Final round of module orders?   Michael Carter
• [Elecraft] Final round of module orders?   Douglas Zwiebel
• [Elecraft] [K2] K2/100 - Serial Port Quit Working   Bill Coleman
  • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Don Wilhelm
    • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Bill Coleman
      • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Bill Coleman
      • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Don Wilhelm
      • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Bill Coleman
      • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Don Wilhelm
      • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Bill Coleman
      • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Bill Coleman
      • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Bill Coleman
      • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Don Wilhelm
      • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Don Wilhelm
  • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Matt Maguire
    • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Don Wilhelm
      • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Bill Coleman
    • [Elecraft] [K2] K2/100 - Serial Port Quit Working   Bill Coleman
• [Elecraft] PLL Range test   Comcast
  • [Elecraft] PLL Range test   JAMES GUNNOE
    • [Elecraft] PLL Range test   Don Wilhelm
• [Elecraft] SSB Net for Sunday 10-17-2021   Eric Lanzl
• [Elecraft] SSB Net for 10-24-2021   Eric Lanzl
• [Elecraft] SSB Net October 31st 2021   Eric Lanzl
• [Elecraft] Extra Cables Available   Jan
• [Elecraft] KX2 For Sale - Fully Loaded   Roger Marrotte
• [Elecraft] Fw: Re[2]: PLL Range test   Dave Van Wallaghen
• [Elecraft] K4 or K4D   Dave Barr
  • [Elecraft] K4 or K4D   Greg Mitchell
  • [Elecraft] K4 or K4D   Wes
    • [Elecraft] K4 or K4D   Bob Schwerdlin
• [Elecraft] K4 or K4D?   Roger Stimson
  • [Elecraft] K4 or K4D?   Kevin McQuiggin
  • [Elecraft] K4 or K4D?   Dave
  • [Elecraft] K4 or K4D?   Ed W0YK
• [Elecraft] MMTY settings for K3S   eric norris
• [Elecraft] K3S MMTY MYSTERY SOLVED!   Eric Norris
• [Elecraft] K2/100 in a high RF environment   Chuck Chandler
  • [Elecraft] K2/100 in a high RF environment   Fred Jensen
• [Elecraft] [K3][K2][K1] Legacy Update, Tuneup, Rescue, Build Services   Alan D. Wilcox
• [Elecraft] Elecraft CW Net Sweepstakes Break   kevin
• [Elecraft] HD8R   Jim Sheldon
  • [Elecraft] HD8R   Bill Lederer
    • [Elecraft] HD8R   Lyn Norstad
      • [Elecraft] HD8R   Wes
      • [Elecraft] HD8R   Graydon Jensen
  • [Elecraft] HD8R   Drew AF2Z
    • [Elecraft] HD8R   Bill Lederer
      • [Elecraft] HD8R   Drew AF2Z
      • [Elecraft] HD8R   Bill Lederer
• [Elecraft] 2nd RX Removal   Dave Agsten
  • [Elecraft] 2nd RX Removal   George Thornton
    • [Elecraft] 2nd RX Removal   Rajiv Dewan
• [Elecraft] K4 operating manual   Fredric Serota
• [Elecraft] Elecraft 20 SSB Net - November 7, 2021   Jim White
• [Elecraft] K4 operating manual now available as both .pdf and .html   Julia Tuttle
• [Elecraft] Sunday 1900Z, 40 meter SSB net, 7.280   Steve Hall
• [Elecraft] Sunday (ET) Monday 2000Z, 80 meter SSB net, 3.775   Dave New
  • [Elecraft] Sunday (ET) Monday 2000Z, 80 meter SSB net, 3.775   Carl Yaffey
    • [Elecraft] Sunday (ET) Monday 2000Z, 80 meter SSB net, 3.775   Dave New
      • [Elecraft] Sunday (ET) Monday 2000Z, 80 meter SSB net, 3.775   Carl Yaffey
• [Elecraft] K2 new kit question   JAMES GUNNOE
  • [Elecraft] K2 new kit question   Victor Rosenthal 4X6GP
  • [Elecraft] K2 new kit question   Don Wilhelm
• [Elecraft] Configuring DXLabs Suite, Win4K3 and K3 for FT8 etc.   Brian Deuby
  • [Elecraft] Configuring DXLabs Suite, Win4K3 and K3 for FT8 etc.   Jim Brown
    • [Elecraft] Configuring DXLabs Suite, Win4K3 and K3 for FT8 etc.   Bill Frantz
      • [Elecraft] Configuring DXLabs Suite, Win4K3 and K3 for FT8 etc.   Jim Brown
      • [Elecraft] Configuring DXLabs Suite, Win4K3 and K3 for FT8 etc.   Tim Tucker
  • [Elecraft] Configuring DXLabs Suite, Win4K3 and K3 for FT8 etc.   Dave Fugleberg
• [Elecraft] Unbalanced audio K3   Mpridesti
• [Elecraft] [KX3] KX3: XVn RF and XVn OFS   sm6ehy at yahoo.com
• [Elecraft] KX3] KX3: XVn RF and XVn OFS   Geert Jan de Groot
• [Elecraft] K3 3 second delay in receive after transmit keyed when amp on   Robert Sands
  • [Elecraft] K3 3 second delay in receive after transmit keyed when amp on   Robert Sands
• [Elecraft] Configuring DXLabs Suite, Win4K3 and K3 for FT8, etc.   Bob McGraw
• [Elecraft] Legal Limit With FT8   Richard
  • [Elecraft] Legal Limit With FT8   Rick Tavan
    • [Elecraft] Legal Limit With FT8   Jim Brown
      • [Elecraft] Legal Limit With FT8   Ray
      • [Elecraft] Legal Limit With FT8   Richard
      • [Elecraft] Legal Limit With FT8   Lyn Norstad
      • [Elecraft] Legal Limit With FT8   Rick Bates, NK7I
      • [Elecraft] Legal Limit With FT8   Hank Garretson
      • [Elecraft] Legal Limit With FT8   Gordon LaPoint
      • [Elecraft] Legal Limit With FT8   Bill Coleman
      • [Elecraft] Legal Limit With FT8   marvwheeler at nwlink.com
  • [Elecraft] Legal Limit With FT8   Wes
• [Elecraft] K2 - Stumble at the last hurdle.   M Bak
  • [Elecraft] K2 - Stumble at the last hurdle.   Dave Van Wallaghen
  • [Elecraft] K2 - Stumble at the last hurdle.   Don Wilhelm
• [Elecraft] Legal Limit With FT8   Andy Durbin
  • [Elecraft] Legal Limit With FT8   Andy Durbin
    • [Elecraft] Digital Modes DO Require Skills   Jim Brown
    • [Elecraft] Legal Limit With FT8   Mike Harris
      • [Elecraft] Legal Limit With FT8   Ed W0YK
    • [Elecraft] Legal Limit With FT8   Andy Durbin
      • [Elecraft] Legal Limit With FT8   Bill Steffey
      • [Elecraft] Legal Limit With FT8   Mike Harris
      • [Elecraft] Tail-Ending With FT8   Jim Brown
    • [Elecraft] Legal Limit With FT8   Wes
      • [Elecraft] Legal Limit With FT8   Wes
• [Elecraft] Legal Limit With FT8   Bob McGraw
  • [Elecraft] Legal Limit With FT8   Bill Lederer
• [Elecraft] K2 new kit question   Bruce Rosen
• [Elecraft] K3 3 second delay in receive after transmit keyed, when amp on   Bob McGraw
• [Elecraft] Legal Limit With FT8   Bob McGraw
• [Elecraft] Elecraft CW Net preliminary propagation results   kevin
  • [Elecraft] Elecraft CW Net preliminary propagation results   Bill Frantz
    • [Elecraft] Elecraft CW Net preliminary propagation results   Fred Jensen
• [Elecraft] Max signal level   Mike Wetzel
• [Elecraft] Legal Limit With FT8   John Harper
• [Elecraft] KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and KPA1500   Keith Ennis
• [Elecraft] For sale: K3/0 Mini + RRC   rmdewan at gmail.com
  • [Elecraft] SOLD: K3/0 Mini + RRC   Rajiv Dewan
• [Elecraft] K3s not transmitting AFSK   Mike Dodd
• [Elecraft] Elecraft CW Net Announcement   kevin
• [Elecraft] Nets?   Gordon LaPoint
  • [Elecraft] Nets?   David Bunte
  • [Elecraft] Nets?   Bill Frantz
• [Elecraft] K3s   chris grierson
  • [Elecraft] K3s   Victor Rosenthal
  • [Elecraft] K3s   Wes
• [Elecraft] SSB Net for Sunday October 31, 2021   Eric Lanzl
• [Elecraft] K3s not transmitting AFSK   Mike Dodd
  • [Elecraft] K3s not transmitting AFSK   Jim Rhodes
• [Elecraft] 80M Elecraft SSB net time change!!   Dave New
  • [Elecraft] 80M Elecraft SSB net   Dave New
    • [Elecraft] 80M Elecraft SSB net   Carl Yaffey
• [Elecraft] Elecraft CW Net Report   kevin
• [Elecraft] FS: W2 dir. coupler, HF 200W   Mike Markowski
  • [Elecraft] Sold - FS: W2 dir. coupler, HF 200W   Mike Markowski
• [Elecraft] K2 driving KPA1500   edauer at aya.yale.edu
  • [Elecraft] K2 driving KPA1500   Don Wilhelm
• [Elecraft] K4 allen wrench   Fredric Serota
  • [Elecraft] K4 allen wrench   Harlan Sherriff
  • [Elecraft] K4 allen wrench   Brian Broggie
    • [Elecraft] K4 allen wrench   Harlan Sherriff
• [Elecraft] 40 meter SSB net, 11-14-21 7.280   Steve Hall
• [Elecraft] Allen wrench   Brian Broggie
• [Elecraft] 4Sale - P3 and KX3   Richard Lawn
• [Elecraft] K4 Full Printed Manual? (Mark/WU6R)   Mark Wheeler
  • [Elecraft] K4 Full Printed Manual? (Mark/WU6R)   Wayne Burdick
    • [Elecraft] K4 Full Printed Manual? (Mark/WU6R)   Mark Wheeler
• [Elecraft] K4 allen wrench   john at kk9a.com
• [Elecraft] K3S line out and sidetones   Frank O'Donnell
  • [Elecraft] K3S line out and sidetones   Wes
    • [Elecraft] K3S line out and sidetones   Jim Brown
      • [Elecraft] K3S line out and sidetones   Roy
      • [Elecraft] K3S line out and sidetones   Wes
      • [Elecraft] K3S line out and sidetones   Wes
    • [Elecraft] K3S line out and sidetones   Victor Rosenthal 4X6GP
• [Elecraft] CW Side Tone in TX Test Mode   Mike Harris
• [Elecraft] Headphones (Again!)   John Reilly
  • [Elecraft] Headphones (Again!)   turnbull
    • [Elecraft] Headphones (Again!)   Dave Fugleberg
  • [Elecraft] Headphones (Again!)   Eric Norris
• [Elecraft] K4 allen wrench   Jerry Kirshenbaum
  • [Elecraft] K4 allen wrench   John
• [Elecraft] K3S RX ANT COR?   eric norris
• [Elecraft] FH/K6ZO with KX2?   John Harper
• [Elecraft] KIO2 problem -- maybe   Dave Sublette
  • [Elecraft] KIO2 problem -- maybe   Jim Brown
    • [Elecraft] KIO2 problem -- maybe   David Gilbert
  • [Elecraft] KIO2 problem -- maybe   Don Wilhelm
    • [Elecraft] KIO2 problem -- maybe   Clark Macaulay
• [Elecraft] K3S RX ANT COR?   Michael Carter
• [Elecraft] Elecraft Digest, Vol 211, Issue 11, Message 1   Snielsen3 at nc.rr.com
• [Elecraft] K3 issue   Dick Frey
  • [Elecraft] K3 issue   David Hachadorian
  • [Elecraft] K3 issue   Dave
• [Elecraft] Choke for QRP with unbalanced antennas?   Julia Tuttle
  • [Elecraft] Choke for QRP with unbalanced antennas?   Brian Hunt
  • [Elecraft] Choke for QRP with unbalanced antennas?   Bert
  • [Elecraft] Choke for QRP with unbalanced antennas?   Victor Rosenthal 4X6GP
  • [Elecraft] Choke for QRP with unbalanced antennas?   Jim Brown
• [Elecraft] Elecraft CW Net Announcement   kevin
• [Elecraft] N6KR Wayne discusses Elecraft   Doug Turnbull
  • [Elecraft] N6KR Wayne discusses Elecraft   D Remy
  • [Elecraft] N6KR Wayne discusses Elecraft   K4SRQ-Burt
• [Elecraft] Forty Meter SSB   Richard
  • [Elecraft] Forty Meter SSB   Dave New
• [Elecraft] K-Pod and the DVR   Neil
• [Elecraft] Background Noise with Mike Plugged in to Rear Mike Jack   Pete Smith N4ZR
  • [Elecraft] Background Noise with Mike Plugged in to Rear Mike Jack   Rick Tavan
    • [Elecraft] Background Noise with Mike Plugged in to Rear Mike Jack   David Herring
      • [Elecraft] Background Noise with Mike Plugged in to Rear Mike Jack   Rick Tavan
      • [Elecraft] Background Noise with Mike Plugged in to Rear Mike Jack   Wes
      • [Elecraft] Background Noise with Mike Plugged in to Rear Mike Jack   Jim Brown
      • [Elecraft] YamahaCM-500 headset was Re: Background Noise with Mike Plugged in to Rear Mike Jack   Pete Smith N4ZR
      • [Elecraft] Background Noise with Mike Plugged in to Rear Mike Jack   Bill Frantz
    • [Elecraft] Background Noise with Mike Plugged in to Rear Mike Jack   Pete Smith N4ZR
      • [Elecraft] Background Noise with Mike Plugged in to Rear Mike Jack   Jim Brown
      • [Elecraft] Background Noise with Mike Plugged in to Rear Mike Jack   Pete Smith N4ZR
• [Elecraft] Elecraft CW Net Report   kevin
• [Elecraft] Forty Meter SSB   john at kk9a.com
  • [Elecraft] Forty Meter SSB   Jim Brown
    • [Elecraft] Forty Meter SSB   Bill Frantz
      • [Elecraft] Forty Meter SSB   Fred Jensen
• [Elecraft] K-Pod and the DVR   john at kk9a.com
• [Elecraft] Forty Meter SSB   john at kk9a.com
• [Elecraft] Announcing the Elecraft AX2 miniature 20 meter whip antenna   Wayne Burdick
• [Elecraft] K3/K3s filter for sale   Neil
• [Elecraft] K2 advice needed - what to buy   E J Martin
  • [Elecraft] K2 advice needed - what to buy   David Woolley
• [Elecraft] K2 advice needed - what to buy   Dave Van Wallaghen
• [Elecraft] Selling elecraft equipment   Uncle Ben
  • [Elecraft] Selling elecraft equipment   Julia Tuttle
• [Elecraft] No bars at all on KX3 digital mode transmit   Frank O'Donnell
  • [Elecraft] No bars at all on KX3 digital mode transmit   AL7CR
    • [Elecraft] No bars at all on KX3 digital mode transmit   Julia Tuttle
      • [Elecraft] No bars at all on KX3 digital mode transmit   Brian Hunt
      • [Elecraft] No bars at all on KX3 digital mode transmit   Julia Tuttle
      • [Elecraft] No bars at all on KX3 digital mode transmit   Don Wilhelm
      • [Elecraft] No bars at all on KX3 digital mode transmit   Julia Tuttle
• [Elecraft] [K2] Cheap power supply for KBT2   Douglas Hagerman
  • [Elecraft] [K2] Cheap power supply for KBT2   Jim Brown
    • [Elecraft] [K2] Cheap power supply for KBT2   Louandzip
      • [Elecraft] [K2] Cheap power supply for KBT2   Jim Brown
  • [Elecraft] [K2] Cheap power supply for KBT2   Chris
    • [Elecraft] [K2] Cheap power supply for KBT2   Jim Brown
      • [Elecraft] [K2] Cheap power supply for KBT2   D Remy
      • [Elecraft] [K2] Cheap power supply for KBT2   Chris
      • [Elecraft] [K2] Cheap power supply for KBT2   Louandzip
• [Elecraft] KX3 Setup For Sale   Dave Agsten
• [Elecraft] Background Noise with Mike Plugged in to Rear, Mike Jack   Bob McGraw
  • [Elecraft] Background Noise with Mike Plugged in to Rear, Mike Jack   David Herring
    • [Elecraft] Background Noise with Mike Plugged in to Rear, Mike Jack   David Herring
• [Elecraft] P3: Is ther a way to move macros from one P3 to another P3?   Dave
  • [Elecraft] P3: Is ther a way to move macros from one P3 to another P3?   Carl
    • [Elecraft] P3: Is ther a way to move macros from one P3 to another P3?   Dave
    • [Elecraft] P3: Is ther a way to move macros from one P3 to another P3?   Dave
    • [Elecraft] P3: Is ther a way to move macros from one P3 to another P3?   Carl
• [Elecraft] XV50 Rev B - Questions   Brian Moore
  • [Elecraft] XV50 Rev B - Questions   Don Wilhelm
• [Elecraft] Cheap power supply for KBT2   Bob McGraw
  • [Elecraft] Cheap power supply for KBT2   Dave
• [Elecraft] Legal Limit With FT8   Bob McGraw
  • [Elecraft] Legal Limit With FT8   Ray
• [Elecraft] Background Noise with Mike Plugged in to Rear, , Mike Jack   JR
  • [Elecraft] Background Noise with Mike Plugged in to Rear, , Mike Jack   Victor Rosenthal 4X6GP
    • [Elecraft] Background Noise with Mike Plugged in to Rear, , Mike Jack   Jim Brown
• [Elecraft] Need K3 Board   Gary H. Harmon, Jr.
  • [Elecraft] Need K3 Board   David Gilbert
    • [Elecraft] Need K3 Board   Fred Jensen
      • [Elecraft] Need K3 Board   Jim Brown
      • [Elecraft] Need K3 Board   Fred Jensen
      • [Elecraft] Need K3 Board   Josh Fiden
      • [Elecraft] Need K3 Board   Wes
      • [Elecraft] Need K3 Board   David Gilbert
      • [Elecraft] Need K3 Board   Julia Tuttle
      • [Elecraft] Need K3 Board   Ray
      • [Elecraft] Need K3 Board   Julia Tuttle
      • [Elecraft] Need K3 Board   Julia Tuttle
      • [Elecraft] Need K3 Board   David Gilbert
      • [Elecraft] Need K3 Board   Ray
      • [Elecraft] Need K3 Board   David Gilbert
      • [Elecraft] Need K3 Board   John Simmons
      • [Elecraft] [POSSIBLE SPAM] Re: Need K3 Board   Dr. William J. Schmidt
      • [Elecraft] [POSSIBLE SPAM] Re: Need K3 Board   David Gilbert
      • [Elecraft] [POSSIBLE SPAM] Re: Need K3 Board   Ken K6MR
      • [Elecraft] [POSSIBLE SPAM] Re: Need K3 Board   Dave Sublette
      • [Elecraft] [POSSIBLE SPAM] Re: [POSSIBLE SPAM] Re: Need K3 Board   Dr. William J. Schmidt
      • [Elecraft] [POSSIBLE SPAM] Re: [POSSIBLE SPAM] Re: Need K3 Board   Ken K6MR
      • [Elecraft] [POSSIBLE SPAM] Re: [POSSIBLE SPAM] Re: Need K3 Board   Dr. William J. Schmidt
      • [Elecraft] Need K3 Board   Bill Frantz
      • [Elecraft] Need K3 Board   jerry
      • [Elecraft] Need K3 Board   jerry
      • [Elecraft] Need K3 Board   Dr. William J. Schmidt
  • [Elecraft] Need K3 Board   Henk Remijn PA5KT
• [Elecraft] Bug or a feature   Rajiv Dewan
• [Elecraft] Vibration noise from KPA500   Dave
• [Elecraft] Elecraft K1 VFO reading   Mike Smith VE9AA
  • [Elecraft] Elecraft K1 VFO reading   Louandzip
  • [Elecraft] Elecraft K1 VFO reading   Brian Hunt
  • [Elecraft] Elecraft K1 VFO reading   Don Wilhelm
    • [Elecraft] Elecraft K1 VFO reading   Mike Smith VE9AA
• [Elecraft] Legal Limit With FT8   Richard
  • [Elecraft] Legal Limit With FT8   Julia Tuttle
    • [Elecraft] Legal Limit With FT8   Fred Jensen
• [Elecraft] [K2] Cheap power supply for KBT2   Douglas Hagerman
• [Elecraft] Fwd: Need K3 Board   Dr. William J. Schmidt
• [Elecraft] Using KX3 Utility to decode CW, RTTY   David Haines
  • [Elecraft] Using KX3 Utility to decode CW, RTTY   Julia Tuttle
    • [Elecraft] Using KX3 Utility to decode CW, RTTY   David Haines
      • [Elecraft] Using KX3 Utility to decode CW, RTTY   Bill Frantz
• [Elecraft] Background Noise with Mike Plugged in to Rear, , , Mike Jack   Bob McGraw
• [Elecraft] Need K3 Board   Bob McGraw
• [Elecraft] HELP WITH FT-8 ON MY K3S SETUP   Nolte Dennis
  • [Elecraft] HELP WITH FT-8 ON MY K3S SETUP   Julia Tuttle
  • [Elecraft] HELP WITH FT-8 ON MY K3S SETUP   Brian Hunt
• [Elecraft] Need K3 Board   Ed Cole
• [Elecraft] Common Mode chokes to reduce noise   Ed Cole
  • [Elecraft] Common Mode chokes to reduce noise   Jim Brown
  • [Elecraft] Common Mode chokes to reduce noise   David Gilbert
• [Elecraft] Need K3 Board   JR
• [Elecraft] P3 with SVGA and Power monitor for sale   Bill Johnson
• [Elecraft] K3 sidetone volume when using Line Out   Barry
  • [Elecraft] K3 sidetone volume when using Line Out   Pete Smith N4ZR
• [Elecraft] Elecraft CW Net Announcement   kevin
• [Elecraft] Common Mode chokes to reduce noise   Dave
• [Elecraft] K3 sidetone volume when using Line Out   Geert Jan de Groot
  • [Elecraft] K3 sidetone volume when using Line Out   Barry
• [Elecraft] WTB KPA-1500   Larry Boekeloo
• [Elecraft] Common Mode chokes to reduce noise   Ed Cole
  • [Elecraft] Common Mode chokes to reduce noise   Jim Brown
• [Elecraft] Wanted:K3S   RANDY SCHAAF
• [Elecraft] 40 meter SSB net, 7.280 1900Z   Steve Hall
• [Elecraft] 80M SSB net 3.775 0200z   Bill Frantz
• [Elecraft] Elecraft CW Net Report   kevin
• [Elecraft] K2 No SSB output power with new SSB board fitted.   M Bak
• [Elecraft] Confirm my acceptance to the list   jackp05 at aol.com
• [Elecraft] P3 Issue   Ken Widelitz
• [Elecraft] K2 No SSB output power with new SSB board fitted.   Dave Van Wallaghen
• [Elecraft] WTB KPA-1500   john at kk9a.com
• [Elecraft] KX2 For Sale   Marty Skitch
• [Elecraft] K1 Noise Blanker KNB1 already-built and working   Ken Brown
  • [Elecraft] K1 Noise Blanker KNB1 already-built and working   Eric Norris
• [Elecraft] P3 Issue   Michael Carter
  • [Elecraft] P3 Issue   Ray
• [Elecraft] Noise Blanker KNB1 FOR K1   Ken Brown
• [Elecraft] Any new info on K3/K3S updates availability?   Pete Smith N4ZR
  • [Elecraft] Any new info on K3/K3S updates availability?   Ed Gray W0SD
• [Elecraft] Complete KX3 Station for sale   marvwheeler at nwlink.com
• [Elecraft] K1 Noise Blanker KNB1 already-built and working   Douglas Hagerman
  • [Elecraft] K1 Noise Blanker KNB1 already-built and working   Eric Norris

Last message date: Tue Nov 30 20:50:10 EST 2021
Archived on: Tue Nov 30 20:50:34 EST 2021

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...