[Elecraft] Need K3 Board

[David Gilbert]

LOL.  I bet you don't even know if the board is multilayer or not. I 
don't, and I'm not about to pull it out of the rig just to find out.

I had a KIO3 board go bad in the past and was lucky enough to be able to 
replace it then.  Pretty certain I'm screwed if it happens again.

Dave   AB7E


On 11/26/2021 11:37 PM, Ray wrote:
>
> Its done Every Day.
>
> Look at Russia and China !
>
> Yes, it takes a very Special Skill set…………..
>
> Ray WA6VAB K3
>
> *From: *David Gilbert <mailto:ab7echo at gmail.com>
> *Sent: *Friday, November 26, 2021 3:37 PM
> *To: *elecraft at mailman.qth.net
> *Subject: *Re: [Elecraft] Need K3 Board
>
> Would you try to replicate that board from that schematic without having
>
> access to the artwork for the board??  No frigging way.  It has to fit
>
> into a fairly small space.
>
> Dave   AB7E
>
> On 11/26/2021 3:53 PM, Ray wrote:
>
> > The schematic is Published, Check the Elecraft K3 site.
>
> > Ray WA6VAB K3
>
> >
>
> >
>
> ______________________________________________________________
>
> Elecraft mailing list
>
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/mmfaq.htm
>
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
>
> Please help support this email list: http://www.qsl.net/donate.html
>
> Message delivered to wa6vab at gmail.com
>