[Elecraft] Configuring DXLabs Suite, Win4K3 and K3 for FT8, etc.

[Bob McGraw]

Brian:

I suggest you get WSJT-X working as a stand-a-lone application before 
getting the other applications running.  This will allow you to get the 
audio levels for RX and TX configured.  And will allow you to use CAT 
control for the radio and PTT mode.

DX Labs and Win4K3 can come on board later.  It is much easier to debug 
software system integration one step at a time.

73

Bob, K4TAX


On 11/10/2021 12:31 PM, elecraft-request at mailman.qth.net wrote:
> Message: 18
> Date: Mon, 8 Nov 2021 19:22:02 -0500
> From: Brian Deuby<bdeuby at gmail.com>
> To:elecraft at mailman.qth.net
> Subject: [Elecraft] Configuring DXLabs Suite, Win4K3 and K3 for FT8
> 	etc.
> Message-ID:<c3108432-4153-11b9-49a6-dafeb16e3e3f at gmail.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> I'm interested in getting my feet wet in WSJT digital modes, but don't
> know how to configure my K3, DXLabs Suite and Win4K3 to do this. I've
> checked the K3 manual, Fred Cady's more detailed K3 book and poked
> around the DXLabs and Win4K3 sites, but don't see how to get started.
> Can anyone direct me to a good source(s) of information on this?
>
> 73,
>
> /Brian K8GRR/