[Elecraft] Using KX3 Utility to decode CW, RTTY

[Bill Frantz]

My experience with the K3 may have some application here. When 
using the K3 to decode CW/RTTY, the decoded text can be 
displayed on the K3, on the P3, or have it sent to a computer. 
If you try to display it on the P3 and send it to the computer, 
both locations drop characters. If you want the computer to get 
the complete decode, turn off the display on the P3.

73 Bill AE6JV

On 11/26/21 at 8:34 PM, dhaines at bates.edu (David Haines) wrote:

>Good observation, which I should have known.  Only the KX3 
>decodes. The KX3 Utility displays only part of what is on the 
>KX3 text display and must be losing something along the way.  
>The PX3 seems to display what is on the KX3 text display, but 
>often adds a lot of characters.  Has anybody had success using 
>the KX3 Utility Terminal?  Fred Cady recommends it.

-----------------------------------------------------------------------
Bill Frantz        | Truth and love must prevail  | Periwinkle
(408)348-7900      | over lies and hate.          | 150 
Rivermead Rd #235
www.pwpconsult.com |               - Vaclav Havel | 
Peterborough, NH 03458