October 2006 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Oct 1 02:09:13 EST 2006
Ending: Tue Oct 31 23:26:58 EST 2006
Messages: 739

• [Elecraft] from arrl site   Robert "rc"Conley
• [Elecraft] inverted vertical   Robert "rc"Conley
• [Elecraft] Re: KAT2 question   Ingo Meyer (DK3RED)
• [Elecraft] New KPA100 Rev. D vs. older Rev. C   Ron Hahn (EI2JP)
• [Elecraft] Noise Blanker   Fred (FL)
• [Elecraft] Power Suppy for K2   Fred (FL)
• [Elecraft] Icom 735 inquiry   Fred (FL)
• [Elecraft] Icom 735 inquiry   Fred (FL)
• [Elecraft] Slightly cracked ferrite core in BL2 kit   Fred (FL)
• [Elecraft] WA3WSJ: Bead-Wire Antenna in the Field   Fred (FL)
• [Elecraft] MFJ-1782 Loop Antenna?   Fred (FL)
• [Elecraft] Gazzillion SMT's!   Fred (FL)
• [Elecraft] Cutting leads in tight places   Fred (FL)
• [Elecraft] 2-sided PCB component soldering?   Fred (FL)
• [Elecraft] Attic Antenna   Fred (FL)
• [Elecraft] Attic Antenna   Fred (FL)
• [Elecraft] Small capacitor leads>>>>Bend or not bend??   Fred (FL)
• [Elecraft] Attic Antenna   Fred (FL)
• [Elecraft] N1MM Contest Logger VFO B issue   Simon Brown (HB9DRV)
• [Elecraft] OT: Looking for some foam.   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] K2 #05810   Håkan Olsson
• [Elecraft] OT: Looking for some foam.]   Jean-François Ménard
• [Elecraft] Plexiglas case for K2   Jean-François Ménard
• [Elecraft] Signal generator question   Jean-François Ménard
• [Elecraft] Plexiglas case for K2   Jean-François Ménard
• [Elecraft] Signal generator question... second try...   Jean-François Ménard
• [Elecraft] Signal generator question]   Jean-François Ménard
• [Elecraft] test (don't bother reading)   David A.Belsley
• [Elecraft] BL2 Question Follow Up   AA5CK
• [Elecraft] (Elecraft) Slow AGC   Robert C. Abell
• [Elecraft] Re: Elecraft Mic Gain K2/100   Robert C. Abell
• [Elecraft] Mic Gain, K2/100   Bill Acito
• [Elecraft] Mic Gain, K2/100   Bill Acito
• [Elecraft] FS Books   Rod Ai7NN
• [Elecraft] Re: Elecraft CW Net Report   Albers
• [Elecraft] N1MM Contest Logger VFO B issue   Ken Alexander
• [Elecraft] N1MM Contest Logger VFO B issue   Ken Alexander
• [Elecraft] N1MM Contest Logger VFO B issue   Ken Alexander
• [Elecraft] Re: Elecraft K2 TR adapter   Bill Allen
• [Elecraft] Looking for source for wire and fuses   Ken Allen
• [Elecraft] OT: How do you measure common mode current?   Stephen Arnold
• [Elecraft] KDSP2 - artifact   Stewart Baker
• [Elecraft] Indoor antenna for KX1...   Steve Banks
• [Elecraft] Turn-On Help   Steve Banks
• FW: [Elecraft] Attic Antenna   Dan Barker
• [Elecraft] use of "off topic"   Bob Baxter
• [Elecraft] MFJ-1788 Loop   Thomas Beltran
• [Elecraft] MFJ-1788 Loop   Thomas Beltran
• [Elecraft] Looking for source for wire and fuses   Bill_Harris
• [Elecraft] BL2 Question   Bill_Harris
• [Elecraft] K24U   Peter Boereboom
• [Elecraft] FCC R and O   Jim Brassell
• [Elecraft] Polar Bear Moonlight Madness Event (PBMME)   Edward R. Breneiser
• [Elecraft] KX1 Antenna - light!   Edward R. Breneiser
• [Elecraft] RE: WA3WSJ Weighing-in Limit 25lbs   Edward R. Breneiser
• [Elecraft] WA3WSJ: Bead-Wire Antenna   Edward R. Breneiser
• [Elecraft] WB3AAL & WA3WSJ QRP PBMME Hike!   Edward R. Breneiser
• [Elecraft] WA3WSJ: Bead-Wire Antenna in the Field   Edward R. Breneiser
• [Elecraft] RE: Polar Bear Den Album 2007 Now!   Edward R. Breneiser
• [Elecraft] WA3WSJ: ARES/RACES TelPac Equipment   Edward R. Breneiser
• [Elecraft] WA3WSJ: Bead-Wire Antenna   Edward R. Breneiser
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Jack Brindle
• [Elecraft] N1MM Contest Logger VFO B issue, USB-Serial, & Serial CW Keying   Jack Brindle
• [Elecraft] New KPA100 Rev.   Don Brown
• [Elecraft] Power supply?   Kirk Brown
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Zac Brown
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Zac Brown
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Zac Brown
• [Elecraft] K2 - Problems on 40m   Zac Brown
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Zac Brown
• [Elecraft] Re: K2 - Problems on 40m   Zac Brown
• [Elecraft] K2 Headphone Jack and Internal Speaker   Zac Brown
• [elecraft]135 ft top etc   Bryan
• [elecraft]135 ft top etc   Bryan
• [Elecraft] Gamma Research Very Small Switching Power Supply   John Buck
• [Elecraft] Gamma Research Very Small Switching Power Supply   John Buck
• [Elecraft] Gamma Research Very Small Switching Power Supply   John Buck
• [Elecraft] For Sale New, Unbuilt KXB30   Javier Campos
• [Elecraft] K2 display line   Bill Carpenter
• [Elecraft] MFJ-1788 Loop   Kenneth A. Christiansen
• [Elecraft] RE: Problem with the KPA-100   Phil and Christina
• [Elecraft] Another KPA-100 problem   Phil and Christina
• [Elecraft] Another KPA-100 problem   Phil and Christina
• [Elecraft] 135 ft flat top antennas, again, ad infinitum   Chuck
• [Elecraft] T7 winding: Does the relative starting postion of the secondary winding matter?   Chuck
• [Elecraft] BFO test failure (K2), Part 2 of RF board test   Chuck
• [Elecraft] K2 build: receiver problem....it does not work.   Chuck
• [Elecraft] .component soldering - comment   Chuck
• [Elecraft] KX-1 dead :(   Ron D'Eau Claire
• [Elecraft] Noise Blanker   Ron D'Eau Claire
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Ron D'Eau Claire
• [Elecraft] Noise Blanker   Ron D'Eau Claire
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Ron D'Eau Claire
• [Elecraft] Looking for source for wire and fuses   Ron D'Eau Claire
• [Elecraft] Question About the CP-1 Coupler   Ron D'Eau Claire
• [Elecraft] Noise Blanker   Ron D'Eau Claire
• [Elecraft] K2 sidetone   Ron D'Eau Claire
• [Elecraft] WA3WSJ: Bead-Wire Antenna   Ron D'Eau Claire
• [Elecraft] WA3WSJ: Bead-Wire Antenna   Ron D'Eau Claire
• [Elecraft] Baluns & wires & feeders (oh, my!)   Ron D'Eau Claire
• [Elecraft] Elecraft CW Net Announcment   Ron D'Eau Claire
• [Elecraft] Baluns & wires & feeders (oh, my!)   Ron D'Eau Claire
• [Elecraft] KPA100 - L15 Inductor   Ron D'Eau Claire
• [Elecraft] inverted vertical   Ron D'Eau Claire
• [Elecraft] Carrying The KX1 With Batteries Installed   Ron D'Eau Claire
• [Elecraft] K2 Relay problem   Ron D'Eau Claire
• [Elecraft] When do you use fast AGC?   Ron D'Eau Claire
• [Elecraft] Re: When do you use fast AGC?   Ron D'Eau Claire
• [Elecraft] When S-Meters are Useful (WAS: When do you use fast AGC?)   Ron D'Eau Claire
• [Elecraft] When S-Meters are Useful (WAS: When do you use fast AGC?)   Ron D'Eau Claire
• [Elecraft] When S-Meters are Useful (WAS: When do you usefastAGC?)   Ron D'Eau Claire
• [Elecraft] When S-Meters are Useful   Ron D'Eau Claire
• [Elecraft] Limiting Instead of AGC...(WAS: When S-Meters are Useful)   Ron D'Eau Claire
• [Elecraft] When S-Meters are Useful (WAS: When do you usefastAGC?)   Ron D'Eau Claire
• [Elecraft] MFJ-1782 Loop Antenna?   Ron D'Eau Claire
• [Elecraft] XV144 paired with Uniden HR-2600?   Ron D'Eau Claire
• [Elecraft] K2 Headphone Jack and Internal Speaker   Ron D'Eau Claire
• [Elecraft] XV144 transverter   Ron D'Eau Claire
• [Elecraft] XV144   Ron D'Eau Claire
• [Elecraft] Attic Antenna   Ron D'Eau Claire
• [Elecraft] Plexiglas case for K2   Ron D'Eau Claire
• [Elecraft] Plexiglas case for K2   Ron D'Eau Claire
• [Elecraft] Attic Antenna   Ron D'Eau Claire
• [Elecraft] Attic Antenna   Ron D'Eau Claire
• [Elecraft] More on #4150   Ron D'Eau Claire
• [Elecraft] RE: Attic Ant.-Closed Loop vs. Open Ends?   Ron D'Eau Claire
• [Elecraft] More on #4150   Ron D'Eau Claire
• [Elecraft] Mic Gain, K2/100   Ron D'Eau Claire
• [Elecraft] Mic Gain, K2/100   Ron D'Eau Claire
• [Elecraft] Small capacitor leads>>>>Bend or not bend??   Ron D'Eau Claire
• [Elecraft] Mic Gain, K2/100   Ron D'Eau Claire
• [Elecraft] OT: 50 years   Ron D'Eau Claire
• [elecraft] ANTENNAE LINE THROUGH WALL INTALLATION   Ron D'Eau Claire
• [Elecraft] no audio sidetone for CW   Ron D'Eau Claire
• [Elecraft] K2 swr problem   Robert W Coakley
• [Elecraft] re: mounting toroids   Robert "RC" Conley
• [Elecraft] senior moment   Robert "RC" Conley
• [Elecraft] KX1   Vin Cortina
• [Elecraft] K2 and Icom SM-20 Microphone   Jim Cox
• [Elecraft] Microham Microkeyer Cable for K2   Jim Cox
• [Elecraft] K2 S/N 5778 working FB   Jim Cox
• [Elecraft] CW keying circuit   Carter W. Craigie
• [Elecraft] Slow AGC   Kurt Cramer
• [Elecraft] FS Books   Justin L Croonenberghs
• [Elecraft] Common mode current   Earl W Cunningham
• [Elecraft] Accuracy of W1 wattmeter   Earl W Cunningham
• [Elecraft] Mic Gain, K2/100   Earl W Cunningham
• [Elecraft] OT: 50 years   Earl W Cunningham
• [Elecraft] K2 and SoftRock40   David Cutter
• [Elecraft] Attic Antenna   David Cutter
• [Elecraft] Attic Ant.-Closed Loop vs. Open Ends?   David Cutter
• [Elecraft] N1MM Contest Logger VFO B issue   David Cutter
• [Elecraft] Looking for source for wire and fuses   John D'Ausilio
• [Elecraft] Report and Order .. no mo' novice bands and more ...   John D'Ausilio
• [Elecraft] OT: FCC omnibus R&O   John D'Ausilio
• [Elecraft] XV144 and XV432 : How good are they ?   Martin DD4UKP
• [Elecraft] Problem for K2 # 4498   Robert DROGOUL
• [Elecraft] Power Suppy for K2   Darwin, Keith
• [Elecraft] AF1 Mini-module on order.   Darwin, Keith
• [Elecraft] 3rd Party SSB Monitor?   Darwin, Keith
• [Elecraft] Icom 735 inquiry   Darwin, Keith
• [Elecraft] Problem: K2 Audio Tuning Click or Warble   Darwin, Keith
• [Elecraft] Re: When do you use fast AGC?   Darwin, Keith
• [Elecraft] Re: When do you use fast AGC?   Darwin, Keith
• [Elecraft] When S-Meters are Useful (WAS: When do you use fastAGC?)   Darwin, Keith
• [Elecraft] When S-Meters are Useful (WAS: When do you use fastAGC?)   Darwin, Keith
• [Elecraft] FS: KAF2, K2 audio filter.   Darwin, Keith
• [Elecraft] Cutting leads in tight places   Darwin, Keith
• [Elecraft] Cutting component leads   Darwin, Keith
• [Elecraft] K2 vs. TS-830s during the contest.   Darwin, Keith
• [Elecraft] Mic Gain, K2/100   Darwin, Keith
• [Elecraft] Re: K2 #5652 speaker   Darwin, Keith
• [Elecraft] OT: 50 years   Darwin, Keith
• [Elecraft] Loop Rx Antennas   Trevor Day
• [Elecraft] When S-Meters are Useful (WAS: When do you use fast AGC?)   Rick Dettinger
• [Elecraft] Attic Antenna   Rick Dettinger
• [Elecraft] BL2 Question   David Dietrich
• [Elecraft] BL2 Question Follow Up   David Dietrich
• [Elecraft] Thanks to all who helped!   David Dietrich
• [Elecraft] 80 m CW and Digital Operation   Michael E. Dobson
• [Elecraft] Baluns & wires & feeders (oh, my!)   Don
• [Elecraft] Baluns & wires & feeders (oh, my!)   Don
• [Elecraft] SSB output overshoot   Don
• [Elecraft] Low pwr output 30m K2/100   David Douglass
• [Elecraft] Baluns & wires & feeders (oh, my!)mailto:elecraft%40mailman.qth.net?Subject=%5BElecraft%5D%20Baluns%20%26%20wires%20%26%20feeders%20%28oh%2C%20my%21%29&In-Reply-To=20061002131840.LPUR21156.ispmxmta06-srv.windstream.net%40webmail-relay.alltel.net   James Duffey
• [Elecraft] KIO 2 Not operating   Alejandro Fernandez - EA4BFK
• [Elecraft] KIO 2 Not operating   Alejandro Fernandez - EA4BFK
• [Elecraft] NAQCC Bear schedule   Soaring Eagles
• [Elecraft] Amp keying circuit   Earl
• [Elecraft] Case for new AF1 mini-module   Ted Ellmore
• [Elecraft] use of "off topic"   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] The ARRL 2007 Handbooks are in (incl. Jan. 1942 QST reprint)   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Elecraft New AT1, AF1 and WM1 Mini-Modules Update   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Nothing new to Elecraft owners...   Bob Evans
• [Elecraft] Clamp on RF meter   J F
• [Elecraft] The ongoing construction of K2 #4455   J F
• [Elecraft] Clamp on RF meter   J F
• [Elecraft] 80 m CW and Digital Operation   J F
• [Elecraft] 80 m CW and Digital Operation   J F
• [Elecraft] Loop Rx Antennas   J F
• [Elecraft] OT: TenTec Corsair problem   J F
• [Elecraft] Foam   J F
• [Elecraft] RE: Attic Ant.-Closed Loop vs. Open Ends?   Todd Fonstad
• [Elecraft] CCW   Joe Fowler
• [Elecraft] Re : Dual receive project   Bob G3PJT
• [Elecraft] k2, freq readout calibration   G3VVT at aol.com
• [Elecraft] Baluns & wires & feeders (oh, my!)   Dave G4AON
• [Elecraft] Suitable hand-held mic(s) for a K2 #5459   Dave G4AON
• [Elecraft] Sell: K1   Donnie Garrett
• [Elecraft] 135 ft flat top antennas, again, ad infinitum   George
• [Elecraft] Small capacitor leads>>>>Bend or not bend??   George
• [Elecraft] soldering   Jim Giercyk
• [Elecraft] KX-1 dead :(   Tod Glenn
• [Elecraft] KX-1 dead :(   Tod Glenn
• [Elecraft] KX-1 dead :(   Tod Glenn
• [Elecraft] KX-1 dead :(   Tod Glenn
• [Elecraft] KX-1 dead :(   Tod Glenn
• [Elecraft] Cutting leads in tight places   Lee H
• [Elecraft] Mic Gain, K2/100   JIMMY D HARRIS
• [Elecraft] Carrying The KX1 With Batteries Installed   Gene Hall
• [Elecraft] K2 and SoftRock40   Tom Hall
• [Elecraft] use of "off topic"   Tom Hammond
• [Elecraft] When do you use fast AGC?   Tom Hammond
• [Elecraft] Cutting leads in tight places   Tom Hammond
• [Elecraft] k2 HEATSINK PANEL DIMS.   Tom Hammond
• [Elecraft] Re: Elecraft K2 TR adapter   Tom Hammond
• [Elecraft] CW keying circuit   Tom Hammond
• [Elecraft] Halloween Special Event Station - W0O....???   Tom Hammond
• [Elecraft] More on #4150   Augie (Gus) Hansen
• [Elecraft] OT: 50 years   John Harper
• [Elecraft] OT: 50 years   John Harper
• [Elecraft] SSB output overshoot   Mike Harris
• [Elecraft] OT: 50 years   Gary Harrison
• [Elecraft] RE: [QRP-L] WB3AAL & WA3WSJ QRP PBMME Hike!   Mike Heitmann
• [Elecraft] QRP-ARCI Fall QSO Party Announcement   Jeff Hetherington
• [Elecraft] KDSP2 - artifact   Harvey Howell
• [Elecraft] KPA100 SWR Bridge Diodes   John Huffman
• [Elecraft] K2 Dual Receive Project   John Huffman
• [Elecraft] XV144 paired with Uniden HR-2600?   Wyn Hughes
• [Elecraft] XV144 paired with ICOM   Wyn Hughes
• [Elecraft] No SSB Output   Treat Hull
• [Elecraft] No SSB Output....Fixed!!   Treat Hull
• [Elecraft] 3rd Party SSB Monitor?   Chris Hurlbut
• [Elecraft] Serial Comm pulsing noise issue on 40m   Gary Hvizdak
• R: [Elecraft] CW 45-70WPM   Alessandro Santucci - I0SKK
• [Elecraft] RE: MFJ-1782 message 20 Vol 19   JONES, George
• [Elecraft] XV144 paired with Uniden HR-2600?   Cathy James
• [Elecraft] XV144 paired with Uniden HR-2600?   Cathy James
• [Elecraft] XV144 transverter   Cathy James
• [Elecraft] When do you use fast AGC?   Jeff
• [Elecraft] MFJ-1782 Loop Antenna as a Receiving Antenna?   Jeff
• [Elecraft] Long Island QRP Club   Jeff
• [Elecraft] Attic Ant.-Closed Loop vs. Open Ends?   Jeff
• [Elecraft] KAT2 vs. LDG AT-100Pro Autotuner   Jeff
• [Elecraft] 135 ft flat top antennas, again, ad infinitum   Fred Jensen
• [Elecraft] When do you use fast AGC?   Fred Jensen
• [Elecraft] Re: When do you use fast AGC?   Fred Jensen
• [Elecraft] 80 m CW and Digital Operation   Fred Jensen
• [Elecraft] Mozilla Thunderbird Email Client - OT   Fred Jensen
• [Elecraft] Re Thunderbird   Fred Jensen
• [Elecraft] KX1   Fred Jensen
• [Elecraft] KX1 receive problem   Joe
• [Elecraft] KX1 receive problem   Joe
• [Elecraft] Switching Power supplies for K2/100   Joe-aa4nn
• [Elecraft] Plexiglas case for K2   Joe-aa4nn
• [Elecraft] OT: 50 years   Joe-aa4nn
• [Elecraft] K2 sidetone   Hans Johansson
• [Elecraft] K2 sidetone   Hans Johansson
• [Elecraft] K2 sidetone   Hans Johansson
• [Elecraft] Fw: XV144 and XV432 : How good are they ?   Siu Johnny
• [Elecraft] XV144 paired with Uniden HR-2600?   Siu Johnny
• [Elecraft] XV144 paired with Uniden HR-2600?   Siu Johnny
• [Elecraft] XV144 paired with ICOM   Siu Johnny
• [Elecraft] KDSP2 - artifact   Siu Johnny
• [Elecraft] KDSP2 - artifact   Siu Johnny
• [Elecraft] Switching Power supplies for K2/100   Bill Johnson
• [Elecraft] Problem: K2 Audio Tuning Click or Warble   Bill Johnson
• [Elecraft] Attic Ant.-Closed Loop vs. Open Ends?   Bill Johnson
• [Elecraft] KAT2 vs. LDG AT-100Pro Autotuner   Bill Johnson
• [Elecraft] FCC R and O   Lyle Johnson
• [Elecraft] KDSP2 - artifact   Lyle Johnson
• [Elecraft] KDSP2 - artifact   Lyle Johnson
• [Elecraft] Sending CW from WriteLog   Bob Jones
• [Elecraft] K2 U10a on control board oscillates on receive   Marshall Jose
• [Elecraft] No SSB Output   Marshall Jose
• [Elecraft] WA3WSJ: Bead-Wire Antenna   Marshall Jose
• [Elecraft] T7 winding: Does the relative starting postion of thesecondary winding matter?   Jose, Marshall
• [Elecraft] BFO test failure (K2), Part 2 of RF board test   Marshall Jose
• [Elecraft] New KPA100 Rev.   Marshall Jose
• [Elecraft] Cutting component leads   Marshall Jose
• [Elecraft] Carrying The KX1 With Batteries Installed - Philmont   Ben Hofmann K1NT
• [Elecraft] New KPA100 Rev.   Ben Hofmann K1NT
• [Elecraft] Anyone have a .pdf copy of the KPA100 manual revision C?   Ben Hofmann K1NT
• [Elecraft] Anyone have a .pdf copy of the KPA100 manual revision C?   Ben Hofmann K1NT
• [Elecraft] K2 sidetone   Vic K2VCO
• [Elecraft] OT: Argonaut help needed   Vic K2VCO
• [Elecraft] OT: Argonaut help needed   Vic K2VCO
• [Elecraft] Clamp on RF meter   Vic K2VCO
• [Elecraft] Accuracy of W1 wattmeter   Vic K2VCO
• [Elecraft] W1 wattmeter accuracy   Vic K2VCO
• [Elecraft] OT: TenTec Corsair problem   Vic K2VCO
• [Elecraft] Attic Antenna   Vic K2VCO
• [Elecraft] Attic Antenna   Vic K2VCO
• [Elecraft] Attic Antenna   Vic K2VCO
• [Elecraft] Re: Z range KAT2 ?   Vic K2VCO
• [Elecraft] Attic Antenna   Vic K2VCO
• [Elecraft] N1MM Contest Logger VFO B issue   Vic K2VCO
• [Elecraft] OT: 50 years   Vic K2VCO
• [Elecraft] N1MM Contest Logger VFO B issue, USB-Serial, & Serial CW Keying   Ken K3IU
• [Elecraft] When S-Meters are Useful (WAS: When do you use fast AGC?)   K4tmc at aol.com
• [Elecraft] 50 vs 75 ohm N-connectors   K6MR
• [Elecraft] Cutting leads in tight places   K6TFZ at aol.com
• [Elecraft] Interesting project enclosure for board-only projects   Dan KB6NU
• [Elecraft] CW keying circuit   Dan KB6NU
• [Elecraft] 135 ft flat top antennas, again, ad infinitum   KJ3D
• [Elecraft] My K2 Still Has Its MOJO   KJ7BS
• [Elecraft] Elecraft CW Net Report for October 29th & 30th, 2006   KJ7BS, Mark
• [Elecraft] gamma research PS   KT5X
• [Elecraft] N1MM Contest Logger VFO B issue   KT5X
• [Elecraft] MOX operation of k2   Charlie Kahwagi
• [Elecraft] KXB3080 Review   Keith
• [Elecraft] Dust Cover   Paul Kelly
• [Elecraft] Switching Power supplies for K2/100   Fred N. van Kempen
• [Elecraft] N-gen   Kennet4723 at aol.com
• [Elecraft] No SSB Output   Richard Kent
• [Elecraft] Jamboree on the Air(JOTA)   Richard Kent
• [Elecraft] Speaker shield   Richard Kent
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Stephen W. Kercel
• [Elecraft] Tinkerers and Engineers!   Stephen W. Kercel
• [Elecraft] Tinkerers and Engineers!   Stephen W. Kercel
• [Elecraft] K2 Construction/Updates help   John Kitchens
• [Elecraft] Looking for source for wire and fuses   Ken Kopp
• [Elecraft] FCC R and O   Ken Kopp
• Fw: [Elecraft] IC 735   Ken Kopp
• [Elecraft] OT: Alternator line filter   Ken Kopp
• Fw: [Elecraft] 50 vs 75 ohm N-connectors   Ken Kopp
• [Elecraft] 50 vs 75 ohm N-connectors   Ken Kopp
• [Elecraft] Here's an Old-Timer who knows how to use AGC!   Ken Kopp
• [Elecraft] Loop Antenna observation   Ken Kopp
• [Elecraft] Cutting component leads   Ken Kopp
• [Elecraft] Wall caution   Ken Kopp
• [Elecraft] KX1   Ken Kopp
• [Elecraft] OT 50 years   Hank Kryger
• [Elecraft] OT: FCC omnibus R&O   Thom R LaCosta
• [Elecraft] Re: Indoor antenna for KX1...   Thom R LaCosta
• [Elecraft] OT: 50 years   Thom R LaCosta
• [Elecraft] KX1   Ed Lambert
• [Elecraft] KPA100 upgrade   David Lankshear
• [Elecraft] K2 #4150 lives!   David Lankshear
• [Elecraft] More on #4150   David Lankshear
• [Fwd: Re: [Elecraft] KX-1 dead :(]   Larry
• [Elecraft] KX-1 dead :(   Larry
• [Elecraft] 50 vs 75 ohm N-connectors   Larry
• [Elecraft] Long Island QRP Club   Larry
• [Elecraft] OT: Looking for some foam.   Larry
• [Elecraft] Attic Antenna   Larry
• [Elecraft] Attic Antenna   Larry
• [Elecraft] Attic Ant.-Closed Loop vs. Open Ends?   Larry
• [Elecraft] Gamma Research Very Small Switching Power Supply   Karl Larsen
• [Elecraft] KX-1 dead :(   Karl Larsen
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Karl Larsen
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Karl Larsen
• [Elecraft] Gamma Research Very Small Switching Power Supply   Karl Larsen
• [Elecraft] Baluns & wires & feeders (oh, my!)   Karl Larsen
• [Elecraft] Baluns & wires & feeders (oh, my!)mailto:elecraft%40mailman.qth.net?Subject=%5BElecraft%5D%20Baluns%20%26%20wires%20%26%20feeders%20%28oh%2C%20my%21%29&In-Reply-To=20061002131840.LPUR21156.ispmxmta06-srv.windstream.net%40webmail-relay.alltel.net   Karl Larsen
• [Elecraft] 3rd Party SSB Monitor?   Karl Larsen
• [Elecraft] WTB   Karl Larsen
• [Elecraft] Baluns & wires & feeders (oh, my!)   Karl Larsen
• [Elecraft] Baluns & wires & feeders (oh, my!)   Karl Larsen
• [Elecraft] Baluns & wires & feeders (oh, my!)   Karl Larsen
• [Elecraft] When do you use fast AGC?   Karl Larsen
• [Elecraft] Re: 80 m CW and Digital Operation: It's a new   Karl Larsen
• [Elecraft] When S-Meters are Useful (WAS: When do you use fastAGC?)   Karl Larsen
• [Elecraft] New Rules from FCC   Karl Larsen
• [Elecraft] New KPA100 Rev.   Karl Larsen
• [Elecraft] Gamma Research Very Small Switching Power Supply   Leigh L Klotz, Jr.
• [Elecraft] Power Suppy for K2   Leigh L Klotz, Jr.
• [Elecraft] Interesting project enclosure for board-only projects   Leigh L Klotz, Jr.
• [Elecraft] Re: Indoor antenna for KX1...   Leigh L Klotz, Jr.
• [Elecraft] BL2 Question Follow Up   Leigh L Klotz, Jr.
• [Elecraft] Gamma Research Very Small Switching Power Supply   Leigh L. Klotz, Jr.
• [Elecraft] N1MM Contest Logger VFO B issue   Gregg R. Lengling
• [Elecraft] Mic Gain, K2/100   Gregg R. Lengling
• [Elecraft] Looking for source for wire and fuses   John R. Lonigro
• Fw: [Elecraft] 50 vs 75 ohm N-connectors   John R. Lonigro
• [Elecraft] 135 ft flat top antennas, again, ad infinitum   Chuck Mabbott
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Geoffrey Mackenzie-Kennedy
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Geoffrey Mackenzie-Kennedy
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Geoffrey Mackenzie-Kennedy
• [elecraft]135 ft top etc   Geoffrey Mackenzie-Kennedy
• [Elecraft] 3rd Party SSB Monitor?   Geoffrey Mackenzie-Kennedy
• [Elecraft] Baluns & wires & feeders (oh, my!)   Geoffrey Mackenzie-Kennedy
• [Elecraft] OT: How do you measure common mode current?   Geoffrey Mackenzie-Kennedy
• [Elecraft] Problem: K2 Audio Tuning Click or Warble   Geoffrey Mackenzie-Kennedy
• [Elecraft] When do you use fast AGC?   Geoffrey Mackenzie-Kennedy
• Fw: [Elecraft] 50 vs 75 ohm N-connectors   Geoffrey Mackenzie-Kennedy
• [Elecraft] Slow AGC   Geoffrey Mackenzie-Kennedy
• [Elecraft] When S-Meters are Useful (WAS: When do you use fastAGC?)   Geoffrey Mackenzie-Kennedy
• [Elecraft] New KPA100 Rev.   Geoffrey Mackenzie-Kennedy
• [Elecraft] MFJ-1782 Loop Antenna as a Receiving Antenna?   Geoffrey Mackenzie-Kennedy
• [Elecraft] Mic Gain, K2/100   Geoffrey Mackenzie-Kennedy
• [Elecraft] MFJ-1788 Loop   Michael Madden
• [Elecraft] XV144 paired with Uniden HR-2600?   John Magliacane
• [Elecraft] K2 Sidetone Level Question   Stephanie Maks
• [Elecraft] Mic Gain, K2/100   Mark Saunders, KJ7BS
• [Elecraft] (no subject)   Jeremiah McCarthy
• [Elecraft] soldering   Jeremiah McCarthy
• [Elecraft] OT-NASA soldering   Jeremiah McCarthy
• [Elecraft] Eraser   Jeremiah McCarthy
• [Elecraft] OT-NASA   Jeremiah McCarthy
• [Elecraft] Looking for source for wire and fuses   Tom McCulloch
• [Elecraft] Re: Indoor antenna for KX1...   Tom McCulloch
• [Elecraft] When do you use fast AGC?   Rolf Moberg
• [Elecraft] N1MM Contest Logger VFO B issue   Randy Moore
• [Elecraft] N1MM Contest Logger VFO B issue, USB-Serial, & Serial CW Keying   Randy Moore
• [Elecraft] FS Books   Sam Morgan
• [Elecraft] MFJ products <was> MFJ-1788 Loop   Sam Morgan
• [elecraft] ANTENNAE LINE THROUGH WALL INTALLATION   Sam Morgan
• [Elecraft] Attic Antenna   Mike Morrow
• [Elecraft] Noise Blanker   N2EY at aol.com
• [Elecraft] Noise Blanker   N2EY at aol.com
• [Elecraft] Tinkerers and Engineers!   N2EY at aol.com
• [Elecraft] OT-NASA soldering   N2EY at aol.com
• [Elecraft] Attic Antenna   N2EY at aol.com
• [Elecraft] Attic Antenna   N2EY at aol.com
• [Elecraft] Attic Antenna   N2EY at aol.com
• [Elecraft] Attic Antenna   N2EY at aol.com
• [Elecraft] Attic Antenna   N2EY at aol.com
• [Elecraft] OT: 50 years   N2EY at aol.com
• [Elecraft] Baluns & wires & feeders (oh, my!)   N2TK, Tony
• [Elecraft] Baluns & wires & feeders (oh, my!)   N2TK, Tony
• [Elecraft] Auto Band Switch Ten Tec Hercules II with a KRC2 band Decoder?   NZ8J
• [Elecraft] Switching Power supplies for K2/100   Don Nesbitt
• [Elecraft] Stone Mountain Hamfest - Lawrenceville GA Nov 4 -5   Don Nesbitt
• [Elecraft] CW keying circuit   Don Nesbitt
• [Elecraft] N2CQ QRP Contest Calendar: Oct 14 - Nov 12, 2006   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: Oct 21 - Nov 20, 2006   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: Oct 27 - Nov 30, 2006   Ken Newman
• [Elecraft] Help with my K2   Tom Nickisch
• [Elecraft] Noise Blanker   Bob Nielsen
• [Elecraft] OT: FCC omnibus R&O   Bob Nielsen
• [Elecraft] OT: FCC omnibus R&O   Bob Nielsen
• [Elecraft] 50 vs 75 ohm N-connectors   Bob Nielsen
• [Elecraft] When do you use fast AGC?   Bob Nielsen
• [Elecraft] 80 m CW and Digital Operation   Bob Nielsen
• [Elecraft] OT-NASA soldering   Bob Nielsen
• [Elecraft] Attic Antenna   Bob Nielsen
• [Elecraft] OT: 50 years   Bob Nielsen
• [Elecraft] RE:OT-NASA soldering   Tim O'Rourke
• Fw: [Elecraft] K2 display line   ON4WIX
• [Elecraft] K2 display line   Jessie Oberreuter
• [Elecraft] C44   Matt Osborn
• [Elecraft] DSP   Arie Kleingeld PA3A
• [Elecraft] Z range KAT2 ?   PE1E
• [Elecraft] Re: Z range KAT2 ?   PE1E
• [Elecraft] cq ww dx contest   PE1E
• [Elecraft] KDSP2 - artifact   PE1E
• [Elecraft] SOC Marathon Sprint - Results & Soapbox   Bob Patten
• [Elecraft] CW keying circuit   Paul
• [Elecraft] 135 ft flat top antennas, again, ad infinitum   Paul Gates, KD3JF
• [Elecraft] Back Again and the KX1   Paul Gates, KD3JF
• [Elecraft] OT: Looking for some foam.   Michael Pfeuffer
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Larry Phipps
• [Elecraft] Question About the CP-1 Coupler   Larry Phipps
• [Elecraft] CP-1 Coupler   Larry Phipps
• [Elecraft] Interesting project enclosure for board-only projects   Larry Phipps
• [Elecraft] Interesting project enclosure for board-only projects   Larry Phipps
• [Elecraft] Re: [QRP-L] Interesting project enclosure for board-only projects   Larry Phipps
• [Elecraft] Re: [QRP-L] Interesting project enclosure for board-only projects   Larry Phipps
• [Elecraft] CW keying circuit   Larry Phipps
• [Elecraft] RE:K2 Sidetone Level Question   Steven Pituch
• [Elecraft] OT: Alternator line filter   Steven Pituch
• [Elecraft] RE:OT: Alternator line filter   Steven Pituch
• [Elecraft] Polar Bear Run 6 October   Ron Polityka
• [Elecraft] Fw: Fast-growing Sunspot   Ron Polityka
• [Elecraft] November Polar Bear Run   Ron Polityka
• [Elecraft] KAT2 question   Alexander Ponomarenko
• [Elecraft] Power Suppy for K2   Samir Popaja
• [Elecraft] 50 vs 75 ohm N-connectors   Jim Price
• [Elecraft] KXB3080 Review   Bruce Prior
• [Elecraft] 80 m CW and Digital Operation: It's a new ballgame!   Bruce Prior
• [Elecraft] Suitable hand-held mic(s) for a K2 #5459   Mark RAYBOULD
• [Elecraft] CW 45-70WPM   RJD
• [Elecraft] WTT for K-2   Radioham
• [Elecraft] 135 ft flat top antennas, again, ad infinitum   Joseph Reed
• [Elecraft] Re: OT: How do you measure common mode current?   Ken Rice
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for October 1st & 2nd, 2006   Kevin Rock
• [Elecraft] Elecraft CW Net Announcment   Kevin Rock
• [Elecraft] Elecraft CW Net Report for October 8th & 9th, 2006   Kevin Rock
• [Elecraft] Elecraft CW Net Errata   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for October 15th & 16th, 2006   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for October 22nd & 23rd, 2006   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement Errata   Kevin Rock
• [Elecraft] Elecraft CW Net Report for October 29th & 30th, 2006   Kevin Rock
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Stuart Rohre
• [Elecraft] Looking for source for wire and fuses   Stuart Rohre
• [Elecraft] Icom 735 inquiry   Stuart Rohre
• [Elecraft] soldering   Stuart Rohre
• [Elecraft] Looking for some foam.   Stuart Rohre
• [Elecraft] Attic Antenna   Stuart Rohre
• [Elecraft] Serial Comm pulsing noise issue on 40m   Stuart Rohre
• [Elecraft] RE: Attic Ant.-Closed Loop vs. Open Ends?   Stuart Rohre
• [Elecraft] Attic Antenna   Stuart Rohre
• [Elecraft] Slightly cracked ferrite core in BL2 kit   Ron
• [Elecraft] Question About the CP-1 Coupler   Paul T. Rubin
• [Elecraft] CP-1 Coupler   Paul T. Rubin
• [Elecraft] Slightly cracked ferrite core in BL2 kit   Paul T. Rubin
• [Elecraft] New KPA100 Rev.   Mike S
• [Elecraft] Cutting component leads   Mike S
• [Elecraft] CW keying circuit   Mark Schreiner
• [Elecraft] Serial Comm pulsing noise issue on 40m   Mark Schreiner
• [Elecraft] N1MM Contest Logger VFO B issue   Mark Schreiner
• [Elecraft] N1MM Contest Logger VFO B issue, USB-Serial, & Serial CW Keying   Mark Schreiner
• [Elecraft] Re: 80 m CW and Digital Operation: It's a new   Dave Sergeant
• [Elecraft] K2 #5540   William Shappley
• [Elecraft] Changes for KPA-100 Rev. D and the Toroid Guy   William Shappley
• [Elecraft] Shameless plug for I Love My K2 (K1/KX1) Buttons   Jim Sheldon
• [Elecraft] Help us at the Melbourne Hamfest   Doug Shields
• [Elecraft] Please help at Melbourne hamfest   Doug Shields
• [Elecraft] Plexiglas case for K2   Doug Shields
• [Elecraft] Prewound Toroid kits available   Doug Shields
• [Elecraft] When S-Meters are Useful   Mike Short
• [Elecraft] N1MM Contest Logger VFO B issue   Mike Short
• [Elecraft] OT: 50 years   Mike Short
• [Elecraft] VCO Alignment on K2   Jay Sissom
• [Elecraft] VCO Alignment on K2   Jay Sissom
• [Elecraft] K2 #5652 speaker   Jay Sissom
• [Elecraft] Re: K2 #5652 speaker   Jay Sissom
• [Elecraft] Re: K2 #5652 speaker   Jay Sissom
• [Elecraft] BL2 Question   Craig D. Smith
• [Elecraft] Attic Antenna   Craig D. Smith
• [Elecraft] Interesting project enclosure for board-only projects   Jack Smith
• [Elecraft] When S-Meters are Useful (WAS: When do you use fast AGC?)   Jack Smith
• [Elecraft] When S-Meters are Useful (WAS: When do you use fast AGC?)   Jack Smith
• [Elecraft] OT: Looking for some foam.   Jack Smith
• FW: [Elecraft] OT: Looking for some foam.   Solosko, Robert B (Bob)
• [Elecraft] OT: Looking for some foam.   Scott Spencer
• [Elecraft] OT Weller DS801 help needed   Stephen
• [Elecraft] WA3WSJ: Bead-Wire Antenna   Steve
• [Elecraft] Re: [QRP-L] WTB   Steve, G4GXL
• [Elecraft] Plexiglas case for K2   Ian Stirling
• [Elecraft] K2 display line   Andrey Stoev
• [Elecraft] Items FS   Brent Sutphin
• [Elecraft] Re: [QRP-L] Items FS   Brent Sutphin
• [Elecraft] Re: [QRP-L] Items FS   Brent Sutphin
• [Elecraft] K2/100 FS   Brent Sutphin
• [Elecraft] Gamma Research Very Small Switching Power Supply   Robert Tellefsen
• [Elecraft] Slightly cracked ferrite core in BL2 kit   Robert Tellefsen
• [Elecraft] BL2 Question   Robert Tellefsen
• [Elecraft] Signal generator question   Robert Tellefsen
• [Elecraft] OT: 50 years   Robert Tellefsen
• [Elecraft] K2 / PAC-12   Tracker
• [Elecraft] Elecraft CW Net Report for October 15th & 16th, 2006   Tracker
• [Elecraft] K2 Headphone Jack and Internal Speaker   Paul - VE1DY
• [Elecraft] Problem: K2 Audio Tuning Click or Warble   Bill Acito W1PA
• [Elecraft] Problem: K2 Audio Tuning Click or Warble   Bill Acito W1PA
• [Elecraft] Problem: K2 Audio Tuning Click or Warble   Bill Acito W1PA
• [Elecraft] Problem: K2 Audio Tuning Click or Warble   Bill Acito W1PA
• [Elecraft] Mic Gain, K2/100   Bill Acito W1PA
• [Elecraft] KDSP2 - artifact   Bill Acito W1PA
• [Elecraft] SSB output overshoot   Bill Acito W1PA
• [Elecraft] K2 / PAC-12   Larry Makoski W2LJ
• [Elecraft] NAQCC Bear Hunt - Wisconsin   Larry Makoski W2LJ
• [Elecraft] October NAQCC Sprint   Larry Makoski W2LJ
• [Elecraft] October Pork Run   Larry Makoski W2LJ
• [Elecraft] Dust Cover   Larry Makoski W2LJ
• [Elecraft] OT: 50 years   Larry Makoski W2LJ
• [Elecraft] Last call for Foxes!   Larry Makoski W2LJ
• [Elecraft] OT: 50 years   W4ABW at aol.com
• [Elecraft] 135 ft flat top antennas, again, ad infinitum   Sandy W5TVW
• [Elecraft] 80 m CW and Digital Operation   Sandy W5TVW
• [Elecraft] 80 m CW and Digital Operation   Sandy W5TVW
• [Elecraft] Attic Antenna   Sandy W5TVW
• [Elecraft] Attic Antenna   Sandy W5TVW
• [Elecraft] XV144 and XV432 : How good are they ?   Bill W5WVO
• [Elecraft] When S-Meters are Useful (WAS: When do you usefastAGC?)   Bill W5WVO
• [Elecraft] 2-sided PCB component soldering?   Bill W5WVO
• [Elecraft] OT: 50 years   Bob W7AVK
• [Elecraft] OT: FCC omnibus R&O   Rob Locher W7GH
• [Elecraft] OT: Looking for some foam.   Rob Locher W7GH
• [Elecraft] Re: Elecraft Digest, Vol 30, Issue 4 -- New Transverters   Wa6bfh at aol.com
• [Elecraft] Re: Elecraft Digest, Vol 30, Issue 5 New Transverters   Wa6bfh at aol.com
• [Elecraft] Noise Blanker   Jimmy Walker
• [Elecraft] KAT100 problem   Dave Van Wallaghen
• [Elecraft] Re:OT: TenTec Corsair problem   Allen C. Ward
• [Elecraft] K2 hangs when using TUNE   Simon & Liz Watts
• [Elecraft] K2 hangs when using TUNE   Simon & Liz Watts
• [Elecraft] KAT100 question   John Wiener
• [Elecraft] KAT100 and KPA100 output   John Wiener
• [Elecraft] Switching Supplies   John Wiener
• [Elecraft] 40M DX and DSP   John Wiener
• [Elecraft] KAT100 problem   John Wiener
• [Elecraft] KAT100 problem, the sequel   John Wiener
• [Elecraft] EZ PSK interface USB   John Wiener
• [Elecraft] no audio sidetone for CW   John Wiener
• [Elecraft] Will Build or Complete your Elecraft   Alan D. Wilcox
• [Elecraft] OT: FCC omnibus R&O   Jim Wiley
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   Don Wilhelm
• [Elecraft] Question About the CP-1 Coupler   Don Wilhelm
• [Elecraft] KX-1 dead :(   Don Wilhelm
• [Elecraft] KX-1 dead :(   Don Wilhelm
• [Elecraft] KAT100 and KPA100 output   Don Wilhelm
• [Elecraft] CP-1 Coupler   Don Wilhelm
• [Elecraft] KIO 2 Not operating   Don Wilhelm
• [Elecraft] T7 winding: Does the relative starting postion of thesecondary winding matter?   Don Wilhelm
• [Elecraft] Another KPA-100 problem   Don Wilhelm
• [Elecraft] K2 hangs when using TUNE   Don Wilhelm
• [Elecraft] KPA100 - L15 Inductor   Don Wilhelm
• [Elecraft] N-gen   Don Wilhelm
• [Elecraft] k2, freq readout calibration   Don Wilhelm
• [Elecraft] inverted vertical   Don Wilhelm
• [Elecraft] Slightly cracked ferrite core in BL2 kit   Don Wilhelm
• [Elecraft] Problem: K2 Audio Tuning Click or Warble   Don Wilhelm
• [Elecraft] BFO test failure (K2), Part 2 of RF board test   Don Wilhelm
• [Elecraft] k2, freq readout calibration -> now completely dead   Don Wilhelm
• [Elecraft] K2 Relay problem   Don Wilhelm
• [Elecraft] k2, freq readout calibration   Don Wilhelm
• [Elecraft] K2 build: receiver problem....it does not work.   Don Wilhelm
• [Elecraft] KX1 receive problem   Don Wilhelm
• [Elecraft] When S-Meters are Useful (WAS: When do you use fast AGC?)   Don Wilhelm
• [Elecraft] Tinkerers and Engineers!   Don Wilhelm
• [Elecraft] New KPA100 Rev.   Don Wilhelm
• [Elecraft] New KPA100 Rev.   Don Wilhelm
• [Elecraft] VCO Alignment on K2   Don Wilhelm
• [Elecraft] XV144 paired with Uniden HR-2600?   Don Wilhelm
• [Elecraft] XV144 paired with ICOM   Don Wilhelm
• [Elecraft] XV144 transverter   Don Wilhelm
• [Elecraft] MOX operation of k2   Don Wilhelm
• [Elecraft] XV144   Don Wilhelm
• [Elecraft] BL2 Question Follow Up   Don Wilhelm
• [Elecraft] Cutting leads in tight places   Don Wilhelm
• [Elecraft] k2 HEATSINK PANEL DIMS.   Don Wilhelm
• [Elecraft] Problem for K2 # 4498   Don Wilhelm
• [Elecraft] KIO2 sends out to pc but doesn't take commands from pc   Don Wilhelm
• [Elecraft] KAT100 problem, the sequel   Don Wilhelm
• [Elecraft] Signal generator question   Don Wilhelm
• [Elecraft] KAT2 question   Don Wilhelm
• [Elecraft] Z range KAT2 ?   Don Wilhelm
• [Elecraft] K2 swr problem   Don Wilhelm
• [Elecraft] N1MM Contest Logger VFO B issue   Don Wilhelm
• W3FPR: RE: [Elecraft] KIO2 sends out to pc but doesn't take commands from pc   Don Wilhelm
• [Elecraft] Disable KAT-2   Don Wilhelm
• [Elecraft] Mic Gain, K2/100   Don Wilhelm
• [Elecraft] senior moment   Don Wilhelm
• [Elecraft] Small capacitor leads>>>>Bend or not bend??   Don Wilhelm
• [Elecraft] KDSP2 - artifact   Don Wilhelm
• [Elecraft] no audio sidetone for CW   Don Wilhelm
• [Elecraft] Filter problems end of Stage 2.   Ron Willcocks
• [Elecraft] New KPA100 Rev.   Ron Willcocks
• [Elecraft] Changes for KPA100 & Toroid Guy   Ron Willcocks
• [Elecraft] C44   William M. Spaulding, SR
• [Elecraft] Need Help   William M. Spaulding, SR
• [Elecraft] Turn-On Help   William M. Spaulding, SR
• [Elecraft] Dead band + RF = QSO   John Young
• [Elecraft] XV144   John A. Ross [Ecraft]
• [Elecraft] XV144   John A. Ross [Ecraft]
• [Elecraft] 135ft flat-top with K2, KAT2, BL2, and 450 ohm feedline   jean-marc bourdereau
• [Elecraft] Re: Indoor antenna for KX1...   wayne burdick
• [Elecraft] Re: Indoor antenna for KX1...   wayne burdick
• [Elecraft] Re: W1 wattmeter accuracy   wayne burdick
• [Elecraft] Re: Back Again and the KX1   wayne burdick
• [Elecraft] When S-Meters are Useful (WAS: When do you use fast AGC?)   charliedelta at hushmail.com
• [Elecraft] When S-Meters are Useful (WAS: When do you use fast AGC?)   charliedelta at hushmail.com
• [Elecraft] k2 for sale   john cooper
• [Elecraft] When S-Meters are Useful   d.cutter at ntlworld.com
• [Elecraft] New KPA100 Rev.   d.cutter at ntlworld.com
• [Elecraft] New KPA100 Rev.   d.cutter at ntlworld.com
• [Elecraft] Switching Power supplies for K2/100   eurom6 at cox.net
• [Elecraft] spiderbeam 18m mast   g0wfhchris
• [Elecraft] 5701 alive ! - order for option installation ?   g4amt at sennen-cove.com
• [Elecraft] Attic Antenna   g4ilo at qsl.net
• [Elecraft] Looking for some foam.   Richard haendel
• [Elecraft] re attic antennas   Richard haendel
• [Elecraft] re attic antennas and ground radials   Richard haendel
• [Elecraft] KIO2 sends out to pc but doesn't take commands from pc   james1787 at aol.com
• W3FPR: RE: [Elecraft] KIO2 sends out to pc but doesn't take commands from pc   james1787 at aol.com
• [Elecraft] KIO2 sends out to pc but doesn't take commands from pc   james1787 at aol.com
• [Elecraft] Re: Odd condition on 20 meters w/k2100/kat100   jferg977 at aol.com
• [Elecraft] Elecraft CW Net Announcment   jmalloy
• [Elecraft] K2 display line   jmalloy
• [Elecraft] Re: "Gazzillion SMT's!"   john.brewer at us.schneider-electric.com
• [Elecraft] WTB   jpgabbard
• [Elecraft] WTB rig found   jpgabbard
• [Elecraft] WTB   jpgabbard
• [Elecraft] question   jpgabbard
• [Elecraft] Attic Antenna   k3yt at adelphia.net
• [elecraft] ANTENNAE LINE THROUGH WALL INTALLATION   k3yt at adelphia.net
• [Elecraft] OT: 50 years   k4zm
• [Elecraft] k2 HEATSINK PANEL DIMS.   k7hbg at dslextreme.com
• [Elecraft] K2 Relay problem   graham knox
• [Elecraft] N0EVH/PM thanks to W0RW and KX1   n0evh
• [Elecraft] Carrying The KX1 With Batteries Installed   n0so at charter.net
• [Elecraft] Attic Antenna   n2ey at aol.com
• [Elecraft] Attic Antenna   n2ey at aol.com
• [Elecraft] OT: Looking for some foam.   nf7v at cox.net
• [Elecraft] Disable KAT-2   nr5a
• [Elecraft] k2, freq readout calibration   pc5m, Carel
• [Elecraft] k2, freq readout calibration -> now completely dead   pc5m, Carel
• [Elecraft] K2, freq calibration error, solved !   pc5m, Carel
• [Elecraft] RE: [QRP-L] No Isle of Man heard   rattray
• [Elecraft] OT: 50 years   rattray
• [Elecraft] k1-4 #2261   rc
• [Elecraft] HMM-iC   rlk
• [Elecraft] use of "off topic"   rlpend
• [Elecraft] Icom 735 inquiry   rlpend
• [Elecraft] IC 735   rlpend
• [Elecraft] Noise Blanker   ron
• [Elecraft] 135 ft flat top antennas, again, ad infinitum   ron
• [Elecraft] Switching Power supplies for K2/100   ron
• [Elecraft] Noise Blanker   ron
• [Elecraft] Attic Ant.-Closed Loop vs. Open Ends?   ron
• [Elecraft] noise blanker   ron
• [Elecraft] Switching Power supplies for K2/100   sheajohnw at aol.com
• [Elecraft] KRC2 for sale   steve
• [Elecraft] KPA 100   surfbird04 at comcast.net
• [Elecraft] Power Suppy for K2   michael taylor
• [Elecraft] Re: Elecraft Digest, Vol 30, Issue 4 -- New Transverters   michael taylor
• [Elecraft] Slightly cracked ferrite core in BL2 kit   michael taylor
• [Elecraft] KPA100 - L15 Inductor   vk2nu at bigpond.net.au
• [Elecraft] W1 Wattmeter Software Questions   vtnn43e at comcast.net
• [Elecraft] Problem: K2 Audio Tuning Click or Warble   w1xt at rmcgraphics.com
• [Elecraft] 50 vs 75 ohm N-connectors   w2bvh
• [Elecraft] 50 vs 75 ohm N-connectors   w2bvh
• [Elecraft] Problem: K2 Audio Tuning Click or Warble   w6fvi
• [Elecraft] OT: Argonaut help needed   w6jd at comcast.net
• [Elecraft] Re: When do you use fast AGC?   w6jd at comcast.net
• [Elecraft] Baluns & wires & feeders (oh, my!)   wd4lst at windstream.net
• [Elecraft] KX1 Antenna - light!   wd4lst at windstream.net
• [Elecraft] Baluns & wires & feeders (oh, my!)   wd4lst at windstream.net
• [Elecraft] Elecraft CW Net Report for October 8th & 9th, 2006   wd4lst at windstream.net
• [Elecraft] Icom 735 inquiry   wd4lst at windstream.net
• [Elecraft] WA3WSJ: Bead-Wire Antenna in the Field   wd4lst at windstream.net
• [Elecraft] K2 on the way   wd4lst at windstream.net
• [Elecraft] trick or treat   wd4lst at windstream.net
• [Elecraft] Re: When do you use fast AGC?   zl1aih at ihug.co.nz

Last message date: Tue Oct 31 23:26:58 EST 2006
Archived on: Tue Oct 31 23:34:07 EST 2006

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...