Fw: [Elecraft] K2 display line

[ON4WIX]

Hi Bill
Same here with my K2 s/n 5361.
As far as I can tell my front panel circuit board is not 100% aligned with
the front panel. I haven't had the time to try and correct this. Maybe
someone else has tried this before?

 73
Glenn ON4WIX
> ----- Original Message ----- 
> From: "jmalloy" <jmalloy at hamilton.edu>
> To: "Bill Carpenter" <NZ0T at cox.net>
> Cc: "elecraft list" <elecraft at mailman.qth.net>
> Sent: Tuesday, October 24, 2006 5:50 PM
> Subject: Re: [Elecraft] K2 display line
>
>
>> Bill Carpenter wrote:
>>> I took my K2 (5703) to the lake cabin last week and noticed that the
>>> display has a line that slants down across the top from left to right. 
>>> I
>>> sit much lower in relation to the rig there than here at home so I had
>>> not seen it before.  At first I thought the display had moved but of
>>> course it's held in place very well so that wasn't it.  Do I have a
>>> problem or is this normal?
>>
>> I don't know if it's "normal", Bill, but my K2 does the same thing.  It's
>> serial #1299 and the "problem" is visible when the rig is higher than
>> eyesight, so I don't consider it a problem.  In fact, I kinda like it --
>> reminds me that this amazing radio is a kit.  One has to marvel at it all
>> the more for the fact that I put it together!
>>
>> 73,
>>
>> Joe, W2RBA
>>
>>
>>
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>