[Elecraft] K2 display line

[Jessie Oberreuter]

      Mine turned out that way as well, and I've advised folks to be aware 
of it before they put the front panel on "for good" so they can put a 
piece of tape across the top to mask it if it bothers them.



On Tue, 24 Oct 2006, jmalloy wrote:

> Bill Carpenter wrote:
>> I took my K2 (5703) to the lake cabin last week and noticed that the 
>> display has a line that slants down across the top from left to right.  I 
>> sit much lower in relation to the rig there than here at home so I had not 
>> seen it before.  At first I thought the display had moved but of course 
>> it's held in place very well so that wasn't it.  Do I have a problem or is 
>> this normal?
>
> I don't know if it's "normal", Bill, but my K2 does the same thing.  It's 
> serial #1299 and the "problem" is visible when the rig is higher than 
> eyesight, so I don't consider it a problem.  In fact, I kinda like it -- 
> reminds me that this amazing radio is a kit.  One has to marvel at it all the 
> more for the fact that I put it together!
>
> 73,
>
> Joe, W2RBA
>
>
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>