[Elecraft] Mic Gain, K2/100

[Ron D'Eau Claire]

Good point, Gregg!

I have the FL1 BFO frequency on my K2 set for optimum transmit audio (using
the OPT1 filter of course). For my taste the receive audio is a bit "bright"
on many signals (not enough low frequency response) so I have the FL2
position BFO frequency set up to shift the passband for a more pleasing
response. 

Since the K2 uses only the OPT1/FL1 settings for transmit, setting up the
other filter positions for different audio characteristics has no effect on
the transmit audio, even if one is selected for receive when I transmit. 

Ron AC7AC

-----Original Message-----
Just remember also that the OP1 filter for SSB receive is also used on 
transmit.  I found that my Heil Pro headset was too muddy so I tailored the 
OP1 filter for best response and have got fantastic audio reports on my K2.

Gregg R. Lengling, W9DHI, Retired,Again
K2/100 SN 3075
http://www.milwaukeehdtv.org
http://forums.ham-radio.ch/