[Elecraft] BFO test failure (K2), Part 2 of RF board test

[Chuck]

My BFO does is not working. The freq. counter reads 0000.0.
I have tried following other posts on the subject and checked the
voltages on U11 and verified that R98 and R99 are present, L33 is
installed correctly.
 Are their any voltage checks I can run on Q24, or L33.
Is there something else I can check? The troubleshooting guiding in the
manual is based on info messages, which I am not getting any.

I just completed the VCO voltage checks and that ran good. Everything
was within range spec'd by the manual. 

Thanks, Chuck - K3TNT