[Elecraft] N1MM Contest Logger VFO B issue

[Gregg R. Lengling]

If you are having problems with HRD with you setup I would venture to say 
the problem is not with your radio or the software but the USB-232 converter 
you are using.  I use HRD exclusively and have no problems.  You will see 
quite a few people having problems with certain USB converters repeatedly on 
the HRD forums site and you will also see a lot of good recommendations for 
better USB adaptors.  That is the first place I would look.

Gregg R. Lengling, W9DHI, Retired,Again
K2/100 SN 3075
http://www.milwaukeehdtv.org
http://forums.ham-radio.ch/


----- Original Message ----- 
From: "Ken Alexander" <k.alexander at rogers.com>
To: "KT5X" <kt5x at cybermesa.com>; <elecraft at mailman.qth.net>
Sent: Sunday, October 29, 2006 3:39 PM
Subject: Re: [Elecraft] N1MM Contest Logger VFO B issue


>I updated my copy of N1MM Logger (v6.10.10)in the hope
> that I would be able to get into the CQWW this weekend
> and noticed that it didn't recognize VFO B either.
>
> On a related note, I downloaded, installed and
> configured Ham Radio Deluxe a few evenings ago and
> found that it's ability to display the K2's frequency
> was very shaky.  If the K2 was tuned to 7015.45 kHz
> then HRD would display the correct freq for a few
> seconds, then it might display something like 701 for
> a few seconds, then 545 for a few more secs, then some
> other combination of digits from the freq
> next...changing every 10 or 15 seconds.
>
> The K2 is connected to my notebook via the cable
> provided with the KIO2 and through a serial-to-USB
> converter.
>
> Any help would be gratefully accepted.
>
> 73,
>
> Ken Alexander
> VE3HLS
>
>
> --- KT5X <kt5x at cybermesa.com> wrote:
>
>> Yes, I noticed the same problem (and more) last
>> summer with VFO B.  Maybe it is fixed in a newer
>> edition, dunno.
>>
>> 72,  Fred - kt5x
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com