[TrunkCom] UHF LTR programming on BC250D and monitoring

Wed, 7 Apr 2004 17:37:47 -0400

Thanks, then I assume that pressing enter will then put the group into
memory when I get to it?  It may be hard with the menus being blind and that
is what I worry about.
----- Original Message ----- 
From: "Sly & Debbie" <[email protected]>
To: <[email protected]>
Sent: Wednesday, April 07, 2004 12:36 AM
Subject: Re: [TrunkCom] UHF LTR programming on BC250D and monitoring


> Unless I misunderstood your question you need to program them (the
> freqs) in the right order. LTR trunking on the unidens require that you
> enter the channels in accordance to their home channel assignments.
> If you have that done right then in order to program in the id's you
> have to go into the menu to do those. With these scanners if you hit
> manual while scanning ltr and you're not stopped on a  ltr conversation
> then it defaults to stopping on the freq and not the id bank (unlike
> motorola). On the flip side if you are scanning and it "stops" on a
> conversation (trunk search mode for example) if you hit manual then it
> should go to your id bank.
> Hope this helps.....
> sly
>
> Jeff Kenyon wrote:
>
> >Hi everyone.  I am a little confused with regard to the programming with
the
> >BC250D in using it for UHF LTR.  When I go to enter in talk groups I get
the
> >squelch and can't seem to enter them in.  I am following the programming
> >instructions for programming in UHF LTR, but with just the ability to
track
> >it unless I am missing something.  Any help on keystrokes would be great,
> >and thanks in advance.
> >
> >_______________________________________________
> >TrunkCom mailing list
> >mailto:[email protected]
> >http://mailman.qth.net/mailman/listinfo/trunkcom
> >
> >
> >
>
>
> _______________________________________________
> TrunkCom mailing list
> mailto:[email protected]
> http://mailman.qth.net/mailman/listinfo/trunkcom