[TrunkCom] UHF LTR programming on BC250D and monitoring

[Sly & Debbie]

Unless I misunderstood your question you need to program them (the 
freqs) in the right order. LTR trunking on the unidens require that you 
enter the channels in accordance to their home channel assignments.
If you have that done right then in order to program in the id's you 
have to go into the menu to do those. With these scanners if you hit 
manual while scanning ltr and you're not stopped on a  ltr conversation 
then it defaults to stopping on the freq and not the id bank (unlike 
motorola). On the flip side if you are scanning and it "stops" on a 
conversation (trunk search mode for example) if you hit manual then it 
should go to your id bank.
Hope this helps.....
sly

Jeff Kenyon wrote:

>Hi everyone.  I am a little confused with regard to the programming with the
>BC250D in using it for UHF LTR.  When I go to enter in talk groups I get the
>squelch and can't seem to enter them in.  I am following the programming
>instructions for programming in UHF LTR, but with just the ability to track
>it unless I am missing something.  Any help on keystrokes would be great,
>and thanks in advance.
>
>_______________________________________________
>TrunkCom mailing list
>mailto:TrunkCom@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/trunkcom
>
>  
>