[Milsurplus] AN/URT-23 amp (AKA Harris RF-110) part needed

[hwhall at compuserve.com]

Once, I cleaned, sanded, and soldered a thin sheet of 
silver to a contact.  Dad had some silver sheet laying around
I have some bits of silver from our foray years ago into lapidary. How big or thick is needed?

WayneWB4OGM

-----Original Message-----
From: KD7JYK DM09 <kd7jyk at earthlink.net>
To: milsurplus at mailman.qth.net <milsurplus at mailman.qth.net>
Sent: Wed, Oct 6, 2021 3:07 pm
Subject: Re: [Milsurplus] AN/URT-23 amp (AKA Harris RF-110) part needed

OUCH!  I've seen that.  Not on that part, but many others.  Always the 
beginning of the end.  If you can find a good part, go with that.  If 
you can re-plate, that could be an option, if you're already set up, or 
can find someone.  Once, I cleaned, sanded, and soldered a thin sheet of 
silver to a contact.  Dad had some silver sheet laying around, I see a 
lot online, seems pricey.  Another option, if set up, turn down the 
face, solder an old dime to it, turn that down to the right thickness.

That's all I've got...

Kurt
______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20211006/77de3d53/attachment.html>