[Milsurplus] AN/URT-23 amp (AKA Harris RF-110) part needed

[KD7JYK DM09]

OUCH!  I've seen that.  Not on that part, but many others.  Always the 
beginning of the end.  If you can find a good part, go with that.  If 
you can re-plate, that could be an option, if you're already set up, or 
can find someone.  Once, I cleaned, sanded, and soldered a thin sheet of 
silver to a contact.  Dad had some silver sheet laying around, I see a 
lot online, seems pricey.  Another option, if set up, turn down the 
face, solder an old dime to it, turn that down to the right thickness.

That's all I've got...

Kurt