[Yaesu] FT990

[Mike]

John -
I don't have my 990 any more, so my rememberer my not be correct.

I'm not sure what you mean by frequency offset, but if you mean the BFO 
offset, it's set by the dip switches under the top cover. The display 
can be changed by holding the 10, 14, and 18 MHz band switches while 
turning the rig on. This from page 21 of the manual.

I don't recall any menus to set anything. HTH

73, Mike NF4L

W9RPM wrote:
> Looking for some help in getting into the 990 menu to adjust the frequency 
> offset. A fellow ham has tried several ways to get into it. You are supposed 
> to press and hold the FAST button along with the RF FSP buttons. This 
> doesn't work. Has tried every possible way of doing it. Pressing  and 
> holding the FAST and the press the RF FSP etc.... Nothing works. Have reset 
> the radio also. Thanks- John W9RPM
> EMAIL: john at w9rpm.com
> WEBPAGE: http://www.w9rpm.com/
> DX and CONTEST CLUB: http://www.w9idx.com/
> AOL IM: W9RPM
> YAHOO: W9RPM
>
>
>
>
> ---
> avast! Antivirus: Outbound message clean.
> Virus Database (VPS): 091227-1, 12/27/2009
> Tested on: 12/28/2009 11:51:43 AM
> avast! - copyright (c) 1988-2009 ALWIL Software.
> http://www.avast.com
>
>
>
> ______________________________________________________________
> Yaesu mailing list
> Home: http://mailman.qth.net/mailman/listinfo/yaesu
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Yaesu at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>