[TVARC] FT4 Frequencies

[John Ellis]

Hi folks,

When you install the latest version of WSJT
ver 2.1.0 (not rc7) it has all the suggested
frequencies preloaded. Switch mode to FT4
and then look at your "frequencies box" and
they should all be there. They change when
you change mode.

Incidentally, while it was designed as a contest
mode only, you will find a lot of stations using
it. Not a bad thing because since in using a
different frequency block, it is taking some of
the load off the regular FT-8 frequencies.

I'm going to try 60M tonite. 5.357MHz!

73,
John, NP2B




On Tue, Jul 30, 2019 at 6:17 PM Frank M <phrankxm at gmail.com> wrote:

> For me, there is some confusion re the ‘proper’ frequencies for FT4
> operation.
> The online FT4 manual from WSJT-X differs from the actual frequencies in
> use, at least on 40 and 20M.
> Does anyone know of a source of FT4 frequencies other than WSJT-X??
>
> Frank KA1AF
> ______________________________________________________________
> TVARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tvarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TVARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



-- 

John Ellis         (NP2B)
1149 Mockingbird Lane
The Villages, FL 32163

telephone 352 633-2910
facsimile  352 633-0401
mobile     340 513-4928
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20190730/5ba97fbe/attachment-0001.html>