[TrunkCom] determining VHF/UHF P-25 table settings for the Pro-96

[Jeff Kenyon]

I don't know, but this is a 9600 BAUD sytsem like what you have in Alaska.
How did you determine the offsets for that system?





On Wed, 12 Apr 2006, JETorres wrote:

> On 4/12/06, Jeff Kenyon <at649 at tcnet.org> wrote:
> > Hi  everyone, I have a question in regards to determining base and off set
> > frequency settings for the VHF/UHF Pro-96.  I know that the only reason
> > for there being a need for tables on the Pro-96 for VHF/UHF is because of
> > a glitch in the firmware of the radio.  I had someone ask about the new
> > P-25 system that is coming on line in Toronto that will be used by th
> > transit authority.
>
>
> The best way would be to run the Pro96Com software on the system to
> determine which tables are used.
>
> Hopefully is not one of those new "Implicit" type of systems that
> don't transmit the Tables on the control channel stream, otherwise, it
> might make it more challenging to figure out.
>
> Also, once you or he get the info from the Pro96Com software, the best
> thing would be to join the Pro96Com Yahoo group where many others and
> me can help figure out the settings with the info provided.
> ______________________________________________________________
> TrunkCom mailing list
> Home: http://mailman.qth.net/mailman/listinfo/trunkcom
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:TrunkCom at mailman.qth.net
>