[TrunkCom] Control Frequency Only Mode

[Jeff Kenyon]

Hi Rich, when you do this, you program these frequencies in conventionally
or in the respective trunked mode, I.E. EDACS or LTR?





On Thu, 27 Oct 2005, bearcat wrote:

> It works because the control data on EDACS or LTR sends the users to an
> LCN # which is also where the scanner will be directed.
>
> Remember lets say you know the LCNs of your system.  On the 250D for
> example: the freq for LCN 3 must be programed into channel 3 like 003 or
> 103 or 203, LCN 5 must be programmed into 005 or 105 or 205 whatever
> bank you are using.
>
> This does work and I did not figure it out it was given to me by someone
> years ago
>
> Rich
>
> -----Original Message-----
> From: trunkcom-bounces at mailman.qth.net
> [mailto:trunkcom-bounces at mailman.qth.net] On Behalf Of Jeff Kenyon
> Sent: Thursday, October 27, 2005 11:50 AM
> To: Discussion of Monitoring Trunk Radio Systems
> Subject: RE: [TrunkCom] Control Frequency Only Mode
>
>
> Hi Rich, how did you figure this out/  I don't see how this can work.
>
>
>
>
>
> On Thu, 27 Oct 2005, bearcat wrote:
>
> > This will work with EDACS and LTR, use the 250 because I know it works
>
> > with that radio, I see no reason it would not work with the PRO 96,
> > however if you use the 96 leave the first channel blank ie 000, 100,
> > 200, 300 start with ch 1 ie 001, 101, 201  The 96 will tell you the
> > LCN # of the control channel so you have one the LCNs right off the
> > bat.
> >
> > Pick one freq from your EDACS or LTR system.
> >
> > Program that freq into the first 20 channels of bank one, yes the same
>
> > freq 20 times.
> >
> > Scan that bank.
> >
> > When a conversation appears on a channel press hold and not the
> > channel no. ie 003 or 011 whatever.  That will correspond to the LCN #
>
> > so 003 would be LCN 3 or 011 would be LCN 11
> >
> > Now pick the next freq, put that freq in every channel except the
> > first on you found so if it was 003 leave the original freq in 003.
> > So you will enter the 2nd freq 19 times.
> >
> > Scan that bank
> >
> > When a conversation appears on a channel press hold and not the
> > channel no. ie 005 or 013 whatever.  That will correspond to the LCN #
>
> > so 005 would be LCN 5 or 013 would be LCN 13
> >
> > Continue the process until you have done this with every freq on the
> > system in the end you will know the LCNs for all of the freqs.
> >
> > One note if you hear more than one control channel on your EDACS
> > system on the air at the same time then it is a multisite system and
> > needs to be programmed in two different banks
> >
> > Rich
> >
> >
> >
> >
> > -----Original Message-----
> > From: trunkcom-bounces at mailman.qth.net
> > [mailto:trunkcom-bounces at mailman.qth.net] On Behalf Of Jeff Kenyon
> > Sent: Thursday, October 27, 2005 8:48 AM
> > To: Discussion of Monitoring Trunk Radio Systems
> > Subject: RE: [TrunkCom] Control Frequency Only Mode
> >
> >
> > Hi Rich, i would be interested to know tihs trick.  Does it work with
> > all EDACS capable scanners or just some of htem?  The two scanners I
> > use or can use for EDACS arte the 250 and Pro-96.
> >
> >
> >
> >
> >
> > On Wed, 26 Oct 2005, bearcat wrote:
> >
> > > Reading between the lines, are you also looking for a way to find
> > > what
> >
> > > the LCN #s are ?
> > >
> > > There is a trick with the scanner you can do.
> > >
> > > I am not going to type it out unless you are looking for the info
> > >
> > > Rich
> > >
> > >
> > >
> > > _______________________________________________
> > > TrunkCom mailing list
> > > mailto:TrunkCom at mailman.qth.net
> > > http://mailman.qth.net/mailman/listinfo/trunkcom
> > >
> > > Mailman: User Guide for List Subscribers
> > > http://mailman.qth.net/subscribers.htm
> > >
> > _______________________________________________
> > TrunkCom mailing list
> > mailto:TrunkCom at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/trunkcom
> >
> > Mailman: User Guide for List Subscribers
> > http://mailman.qth.net/subscribers.htm
> >
> >
> > _______________________________________________
> > TrunkCom mailing list
> > mailto:TrunkCom at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/trunkcom
> >
> > Mailman: User Guide for List Subscribers
> > http://mailman.qth.net/subscribers.htm
> >
> _______________________________________________
> TrunkCom mailing list
> mailto:TrunkCom at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/trunkcom
>
> Mailman: User Guide for List Subscribers
> http://mailman.qth.net/subscribers.htm
>
>
> _______________________________________________
> TrunkCom mailing list
> mailto:TrunkCom at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/trunkcom
>
> Mailman: User Guide for List Subscribers
> http://mailman.qth.net/subscribers.htm
>