[TMRA] PSK31 test partner

[Craig Szczublewski]

What version of Linux are you running?  With regards to fldigi, how is 
your soundcard configured?  Are you using OSS, PortAudio, or 
PulseAudio?  I run SuSE 10 with fldigi 3.20 and PulseAudio.  I found it 
a bit more reliable then OSS.  I'll ask the obvious question also, when 
you transmit under Linux, do you hear anything from the speakers if you 
do not have your rig plugged into your audio out?

KB8NXO at access-ohio.net wrote:
> I would like someone to help me check my PSK31 (flDigi) setup. While on the 
> Q&A net I received fine. I was so impressed with the program that I 
> installed a version for linux. What I have noticed from my tests are that 
> while sending a message with MS Windows is that the water fall only shows an 
> indication on the final transmit. With linux the waterfall shows the signal 
> being transmitted. But I can hear neither with my scanner. So I'm just not 
> sure if either setup is really transmitting. Both receive fine.
>  
> If anyone has the time during the week to help out it would me appreciated.
>  
> Thanks,
> Rick Palmer
> KB8NXO
>  
> ______________________________________________________________
> TMRA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tmra
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TMRA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>   

-- 
-----------------------------------------------------------------------
Craig Szczublewski
Aktion Associates/Unique Systems, Inc.
1687 Woodlands Drive
Maumee, OH 43537
mailto:craig at uniqsys.com http://www.uniqsys.com/
(419)794-2532/(419)893-2840 FAX