[TheForge] TheForge Digest, Vol 125, Issue 3

[Wayne Ackman]

We applied the permalac today.  I did tell them to wax it once a week.
I told them to find pure carnuba as it is  made from palm oil, I think.
Didn't have a source for them tho.  I never thought about mixing it with 
beeswax.
but it  looks like we are on track

> James Binnion <mailto:jbin at well.com>
> June 26, 2014 at 6:26 PM
> One thought in a different direction. Wax it, the wax will need to be 
> reapplied on a regular basis but if you use beeswax and carnuba mix 
> you have a food safe coating and any coating is going to fail in that 
> environment so wax it once a week and make it part of the maintenance 
> done by the staff.
>
> Jim
>
>
> James Binnion
> jbin at well.com
>
>
>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.shutterfly.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Wayne Ackman <mailto:stryker at vulcanpro.com>
> June 25, 2014 at 6:28 PM
> I have always used lacquer myself.  Thanks for the insight on your PU 
> experience.
> I believe they have decided to use Permalac.
>
> Thanks to everyone for your insights.  TheForge is always my go to for 
> confusing issues.
>
> Wayne
>
>
> Andy Gladish <mailto:anjgladish at gmail.com>
> June 25, 2014 at 8:52 AM
> Not a big fan of polyurethane on metal- it's kind of like powder 
> coating in
> that it's ok til it's compromised, then you might as well strip it and
> start all over again.
> I've done quite a bit of restaurant work and work in the homes of
> restaurant owners and managers, and my go to finish for non stainless 
> areas
> is Sculpt Noveau's Insta-Black, which is a selenium based cold blacking.
> It's very nice to work with, you can get it anywhere from an antique brown
> to a full-on black, depending on how fanatic you are with prep.
> Then, the kicker is to seal it with Permalac, a lacquer developed for
> outdoor use over patinas on metal sculpture, from the same company.
> I often use rattle can lacquer from the hardware store, but the important
> thing is that lacquer and polyurethane are two very different animals. 
> Once
> you use lacquer, you probably won't use PU again on steel.
> Hope things work out for you!
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.shutterfly.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
Sent with Postbox <http://www.getpostbox.com>