[TheForge] TheForge Digest, Vol 95, Issue 3

Jerry Frost akfrosty at mtaonline.net
Fri Dec 9 16:31:56 EST 2011


Works but use propylene glycol rather than ethylene glycol as it's not 
nearly as toxic and isn't sweet so critters don't lick it or drink it out of 
the bucket. You really don't want your shop dog or cat dying from renal 
failure old antifreeze is BAD stuff, kills kidneys darned quickly for a 
painful death.

Jer
----- Original Message ----- 
From: "Lynn and Susan Lang" <langfarm at together.net>
To: "'Blacksmithing List Sponsored by ABANA'" <theforge at mailman.qth.net>
Sent: Sunday, December 04, 2011 4:12 PM
Subject: Re: [TheForge] TheForge Digest, Vol 95, Issue 3


> Loose Hammer Head
>
> Antifreeze, about 1 inch in the bottom of a bucket, Soak the hammer,
> head down, leave over-night..
>
> lynn
>
> -----Original Message-----
> From: theforge-bounces at mailman.qth.net
> [mailto:theforge-bounces at mailman.qth.net] On Behalf Of Cindy and James
> Sent: Sunday, December 04, 2011 9:36 AM
> To: theforge at mailman.qth.net
> Subject: Re: [TheForge] TheForge Digest, Vol 95, Issue 3
>
> hammer handles...
>
> I need to re-handle a couple hammers - actually, just reset them in new
> stickup, or whatever it is folks are using to hold the hammer handle in
> the head these days.
>
> What do you use?  I hate to take a good handle (like the one in my Hofi)
>
> and drive wedges in it, and it has gotten a tad bit loose over the
> years.
>
> There is some sort of grey looking caulk (I'm sure it isn't caulk) lots
> of guys are using to set the handles in nowadays.
>
> How do you use it and what  are the steps to follow to do it?
>
> Where do you get it?
>
> James
> NE Texas
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1873 / Virus Database: 2102/4656 - Release Date: 12/04/11
> 



More information about the TheForge mailing list