[TheForge] brass

[Mark A. Pesetsky]

Highest I have gone is maybe 800 then 2 different rouges...SHINY...Let the buffer do most of the work
 
Mark

________________________________

From: theforge-bounces at mailman.qth.net on behalf of Dan Scheid
Sent: Sat 10/20/2007 1:58 PM
To: 'Sponsored by ABANA'
Subject: RE: [TheForge] brass





If you don't mine hand work then use sandpaper. Start with 150 grit and go
to 1500 then hit it with a polisher. You can get up to 1500 wet sanding
paper at an auto supplier in the paint department. If you want the quick
dirty way use a dremal tool with SS buffing compound
Dan Scheid
Morning all;

I have a small job requiring brass pieces 3 foot long bent 90 degrees
along the length.  the bender left marks on the surface.  I have been
experimenting on how best to get a clean shiny surface.  I don't believe
I have the proper abrasives to get this done.  I am trying to remove all
the scratches.  It looks like I need to order something to get this done
right.  So I am asking the brain trust, what will work, and where do you
suggest I order it.  There isn't much around here, so I will probably
have to order online.

Wayne
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com <http://www.photoaccess.com/> 
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.15.3/1081 - Release Date: 10/19/2007
5:41 PM


No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.15.3/1081 - Release Date: 10/19/2007
5:41 PM


_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com <http://www.photoaccess.com/> 
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________