[TheForge] brass

[Bob Willman]

	Scotchbright wheels or pads will polish brass pretty well. 


Bob Willman
Bowling Green, Ohio
The Eagle's Anvil
WB8NQW

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Wayne Ackman
Sent: Saturday, October 20, 2007 4:27 PM
To: Sponsored by ABANA
Subject: Re: [TheForge] brass

Thanks Dan.

I thought I needed some very fine sandpaper, didn't know it was available at
the auto parts store.  Ran down and got some and this works.  Appreciate the
help

Wayne


Dan Scheid wrote:
> If you don't mine hand work then use sandpaper. Start with 150 grit 
> and go to 1500 then hit it with a polisher. You can get up to 1500 wet 
> sanding paper at an auto supplier in the paint department. If you want 
> the quick dirty way use a dremal tool with SS buffing compound Dan 
> Scheid
>   
.
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________